▪  JB/T 12396-2015   比例阀用电磁铁
▪  GB/T 15622-2005    液压缸试验方法(1995)
▪  JB/T 4109.2-1999    中小型液压闸门启闭机 技术条件
▪  DL/T 689-1999    液压压接机
▪  DL/T 896-2004    QPKY型水工平面快速闸门液压启闭机基本参数
▪  DL/T 897-2004    QPPYⅠ、Ⅱ型水工平面闸门液压启闭机基本参数
▪  DL/T 990-2005    双吊点弧形闸门后拉式液压启闭机（液压缸）系列参数
▪  GB 11118.1-1994    矿物油型和合成烃型液压油
▪  GB 21240-2007    液压电梯制造与安装安全规范
▪  GB/T 10179-1988    液压伺服振动试验设备特性的描述方法
▪  GB/T 10544-2003    钢丝缠绕增强外覆橡胶的液压橡胶软管和软管组合件
▪  GB/T 10675-1989    液压挖掘机可靠性试验方法
▪  GB/T 12722-1991    橡胶和塑料软管组合件屈挠液压脉冲试验(半Ω试验)
▪  GB/T 13331-2005    土方机械液压挖掘机起重量
▪  GB/T 13332-1991    液压挖掘机挖掘力测试方法
▪  GB/T 13342-2007    船用往复式液压缸通用技术条件
▪  GB/T 13852-1992    船用液压控制阀技术条件
▪  GB/T 13853-1992    船用液压泵液压马达技术条件
▪  GB/T 14034-1993    24°非扩口液压管接头连接尺寸
▪  GB/T 14036-1993    液压缸活塞杆端带关节轴承耳环安装尺寸
▪  GB/T 14039-2002    液压传动油液固体颗粒污染等级代号
▪  GB/T 14041.1-2007    液压滤芯 结构完整性验证和初始冒泡点的确定
▪  GB/T 14041.2-2007    液压滤芯 材料与液体相容性检验方法
▪  GB/T 14041.3-1993    液压滤芯抗破裂性检验方法
▪  GB/T 14041.4-1993    液压滤芯额定轴向载荷检验方法
▪  GB/T 14042-1993    液压缸活塞杆端柱销式耳环安装尺寸
▪  GB/T 14043-2005    液压传动阀安装面和插装阀阀孔的标识代号
▪  GB/T 14547-1993    船舶电动和电动液压操舵装置电气系统设计
▪  GB/T 14627-1993    大型液压式启闭机
▪  GB/T 14832-1993    橡胶材料与液压流体的相容性试验
▪  GB/T 14904-1994    钢丝增强的橡胶、塑料软管和软管组合件屈挠液压脉冲试验
▪  GB/T 15242.1-1994    液压缸活塞和活塞杆动密封装置用同轴密封件尺寸系列和公差
▪  GB/T 15242.2-1994    液压缸活塞和活塞杆动密封装置用支承环尺寸系列和公差
▪  GB/T 15242.3-1994    液压缸活塞和活塞杆动密封装置用同轴密封件安装沟槽尺寸系列和公差
▪  GB/T 15242.4-1994    液压缸活塞和活塞杆动密封装置用支承环安装沟槽尺寸系列和公差
▪  GB/T 15329.1-2003    橡胶软管及软管组合件织物增强液压型第1部分:油基流体用
▪  GB/T 15560-1995    流体输送用塑料管材液压瞬时爆破和耐压试验方法
▪  GB/T 15623.1-2003    液压传动电调制液压控制阀第1部分:四通方向流量控制阀试验方法
▪  GB/T 15623.2-2003    液压传动电调制液压控制阀第2部分:三通方向流量控制阀试验方法
▪  GB/T 15908-1995    织物增强液压型热塑性塑料软管和软管组合件
▪  GB/T 16898-1997    难燃液压液使用导则
▪  GB/T 17396-1998    液压支柱用热轧无缝钢管
▪  GB/T 17483-1998    液压泵空气传声噪声级测定规范
▪  GB/T 17484-1998    液压油液取样容器净化方法的鉴定和控制
▪  GB/T 17485-1998    液压泵、马达和整体传动装置参数定义和字母符号
▪  GB/T 17486-2006    液压过滤器 压降流量特性的评定
▪  GB/T 17487-1998    四油口和五油口液压伺服阀安装面
▪  GB/T 17488-1998    液压滤芯流动疲劳特性的验证
▪  GB/T 17489-1998    液压颗粒污染分析从工作系统管路中提取液样
▪  GB/T 17490-1998    液压控制阀油口、底板、控制装置和电磁铁的标识
▪  GB/T 17491-1998    液压泵、马达和整体传动装置稳态性能的测定
▪  GB/T 17906-1999    液压破拆工具通用技术条件
▪  GB/T 18252-2000    塑料管道系统用外推法对热塑性塑料管材长期静液压强度的测定
▪  GB/T 18275.2-2000    汽车制动传动装置修理技术条件液压制动
▪  GB/T 18853-2002    液压传动过滤器评定滤芯过滤性能的多次通过方法
▪  GB/T 18854-2002    液压传动液体自动颗粒计数器的校准
▪  GB/T 18947-2003    矿用钢丝增强液压软管及软管组合件
▪  GB/T 19318-2003    小艇液压操舵系统
▪  GB/T 19366-2003    林业机械液压起重臂双手把的操作位置和操作方法
▪  GB/T 19674.1-2005    液压管接头用螺纹油口和柱端--螺纹油口
▪  GB/T 19674.2-2005    液压管接头用螺纹油口和柱端--填料密封柱端(A型和E型)
▪  GB/T 19674.3-2005    液压管接头用螺纹油口和柱端金属对金属密封柱端(B型)
▪  GB/T 19820-2005    液压棉花打包机
▪  GB/T 19925-2005    液压传动隔离式充气蓄能器优先选择的液压油口
▪  GB/T 19926-2005    液压传动充气式蓄能器气口尺寸
▪  GB/T 19932-2005    土方机械液压挖掘机司机防护装置的试验室试验和性能要求
▪  GB/T 19934.1-2005    液压传动金属承压壳体的疲劳压力试验第1部分：试验方法
▪  GB/T 20079-2006    液压过滤器技术条件
▪  GB/T 20080-2006    液压滤芯技术条件
▪  GB/T 20082-2006    液压传动液体污染采用光学显微镜测定颗粒污染度的方法
▪  GB/T 20110-2006    液压传动零件和元件的清洁度与污染物的收集、分析和数据报告相关的检验文件和准则
▪  GB/T 20342-2006    农业拖拉机和机械 远程液压动力伺服和控制机构标志
▪  GB/T 20421.1-2006    液压马达特性的测定第1部分：在恒低速和恒压力下
▪  GB/T 20421.2-2006    液压马达特性的测定第2部分：起动性
▪  GB/T 20421.3-2006    液压马达特性的测定第3部分：在恒流量和恒转矩下
▪  GB/T 20568-2006    金属材料 管环液压试验方法
▪  GB/T 21116-2007    液压振动台
▪  GB/T 2347-1980    液压泵及马达公称排量系列
▪  GB/T 2348-1993    液压气动系统及元件缸内径及活塞杆外径
▪  GB/T 2349-1980    液压气动系统及元件缸活塞行程系列
▪  GB/T 2350-1980    液压气动系统及元件活塞杆螺纹型式和尺寸系列
▪  GB/T 2351-2005    液压气动系统用硬管外径和软管内径
▪  GB/T 2352-2003    液压传动隔离式充气蓄能器压力和容积范围及特征量
▪  GB/T 2353-2005    液压泵及马达的安装法兰和轴伸的尺寸系列及标注代号
▪  GB/T 241-2007    金属管 液压试验方法
▪  GB/T 2514-1993    四油口板式液压方向控制阀安装面
▪  GB/T 2877-2007    液压二通盖板式插装阀 安装连接尺寸
▪  GB/T 2878-1993    液压元件螺纹连接油口型式和尺寸
▪  GB/T 2879-2005    液压缸活塞和活塞杆动密封沟槽尺寸和公差
▪  GB/T 2880-1981    液压缸活塞和活塞杆窄断面动密封沟槽尺寸系列和公差
▪  GB/T 3159-1992    液压式万能试验机
▪  GB/T 3452.1-2005    液压气动用O形橡胶密封圈第1部分:尺寸系列及公差
▪  GB/T 3452.2-2007    液压气动用O 形橡胶密封圈 第2部分：外观质量检验规范
▪  GB/T 3452.3-2005    液压气动用O形橡胶密封圈沟槽尺寸
▪  GB/T 3683.1-2006    橡胶软管及软管组合件钢丝编织增强液压型规范第1部分：油基流体适用
▪  GB/T 3722-1992    液压式压力试验机
▪  GB/T 3766-2001    液压系统通用技术条件
▪  GB/T 3871.18-2006    农业拖拉机　试验规程　第18部分：拖拉机与机具接口处液压功率
▪  GB/T 5170.15-2005    电工电子产品环境试验设备基本参数检定方法振动(正弦)试验用液压振动台
▪  GB/T 5335-1985    汽车制动装置液压试验的连接器
▪  GB/T 5563-2006    橡胶和塑料软管及软管组合件 静液压试验方法
▪  GB/T 5568-2006    橡胶或塑料软管及软管组合件 无挠曲液压脉冲试验
▪  GB/T 5860-2003    液压快换接头尺寸和要求
▪  GB/T 5861-2003    液压快换接头试验方法
▪  GB/T 5862-2004    农业拖拉机和机具通用液压快换接头
▪  GB/T 6572.1-1997    液压挖掘机术语
▪  GB/T 6577-1986    液压缸活塞用带支承环密封沟槽型式、尺寸和公差
▪  GB/T 6578-1986    液压缸活塞杆用防尘圈沟槽型式、尺寸和公差
▪  GB/T 6960.6-2007    拖拉机术语 第6部分: 液压悬挂系及牵引、拖挂装置
▪  GB/T 7127.1-2000    使用非石油基制动液的道路车辆液压制动系统用制动软管组合件
▪  GB/T 7127.2-2000    使用石油基制动液的道路车辆液压制动系统用制动软管组合件
▪  GB/T 7185-2002    内河船液压舵机
▪  GB/T 7586-1996    液压挖掘机试验方法
▪  GB/T 7631.2-2003    润滑剂、工业用油和相关产品(L类)的分类第2部分:H组(液压系统)
▪  GB/T 7742.1-2005    纺织品织物胀破性能 第1部分:胀破强力和胀破扩张度的测定液压法
▪  GB/T 786.1-1993    液压气动图形符号
▪  GB/T 7934-1987    二通插装式液压阀技术条件
▪  GB/T 7935-2005    液压元件通用技术条件
▪  GB/T 7936-1987    液压泵、马达空载排量测定方法
▪  GB/T 7937-2002    液压气动管接头及其相关元件公称压力系列
▪  GB/T 7939-1987    液压软管总成试验方法
▪  GB/T 8098-2003    液压传动带补偿的流量控制阀安装面
▪  GB/T 8099-1987    液压叠加阀安装面
▪  GB/T 8100-2006    液压传动减压阀、顺序阀、卸荷阀、节流阀和单向阀安装面
▪  GB/T 8101-2002    液压溢流阀安装面
▪  GB/T 8107-1987    液压阀压差流量特性试验方法
▪  GB/T 8243.5-2006    内燃机全流式机油滤清器试验方法第5部分：冷起动模拟和液压脉冲耐久试验
▪  GB/T 8606-2003    液压快换接头螺纹连接尺寸及技术要求
▪  GB/T 9065.1-1988    液压软管接头连接尺寸扩口式
▪  GB/T 9065.2-1988    液压软管接头连接尺寸卡套式
▪  GB/T 9065.3-1988    液压软管接头连接尺寸焊接式或快换式
▪  GB/T 9094-2006    液压缸气缸安装尺寸和安装型式代号
▪  GB/T 9139.1-1988    液压挖掘机分类
▪  GB/T 9139.2-1996    液压挖掘机技术条件
▪  GB/T 9140-1996    液压挖掘机结构与性能
▪  GB/T 9166-1988    四柱液压机精度
▪  GB/Z 18427-2001    液压软管组合件液压系统外部泄漏分级
▪  GB/Z 19848-2005    液压元件从制造到安装达到和控制清洁度的指南
▪  GB/Z 20423-2006    液压系统总成清洁度检验
▪  HG 2865-1997    汽车液压自动橡胶皮碗
▪  HG/T 2112-1991    液压式力车胎硫化机
▪  HG/T 21573-1995    高压螺栓和螺栓液压上紧装置
▪  HG/T 2331-1992    液压隔离式蓄能器用胶囊
▪  HG/T 2578-1994    汽车液压自动缸用橡胶护罩
▪  HG/T 2579-1994    ○形圈橡胶材料 第一部分：用于普通液压系统
▪  HG/T 3094-1988（97）    液压气动用多层密封组件测量叠层高度的方法
▪  JB 3915-1985    液压机 安全技术条件
▪  JB 9967-1999    液压机 噪声限值
▪  JB/T 10051-1999    金属切削机床 液压系统通用技术条件
▪  JB/T 10205-2000    液压缸 技术条件
▪  JB/T 10206-2000    摆线液压马达
▪  JB/T 10282-2001    液压挖掘机用先导阀 技术条件
▪  JB/T 10364-2002    液压单向阀
▪  JB/T 10365-2002    液压电磁换向阀
▪  JB/T 10366-2002    液压调速阀
▪  JB/T 10367-2002    液压减压阀
▪  JB/T 10368-2002    液压节流阀
▪  JB/T 10369-2002    液压手动及滚轮换向阀
▪  JB/T 10370-2002    液压顺序阀
▪  JB/T 10371-2002    液压卸荷溢流阀
▪  JB/T 10372-2002    液压压力继电器
▪  JB/T 10373-2002    液压电液动换向阀和液动换向阀
▪  JB/T 10374-2002    液压溢流阀
▪  JB/T 10414-2004    液压二通插装阀 试验方法
▪  JB/T 10427-2004    风力发电机组一般液压系统
▪  JB/T 10515-2005    三轮汽车和低速货车 液压制动轮缸技术条件
▪  JB/T 10516-2005    三轮汽车和低速货车 液压制动主缸技术条件
▪  JB/T 10603-2006    电力液压推动器
▪  JB/T 10607-2006    液压系统工作介质使用规范
▪  JB/T 10759-2007    工程机械 高温高压液压软管总成
▪  JB/T 10760-2007    工程机械 焊接式液压金属管总成
▪  JB/T 10829-2008    液压马达
▪  JB/T 10830-2008    液压电磁换向座阀
▪  JB/T 10831-2008    静液压传动装置
▪  JB/T 10844-2008    液压破碎锤
▪  JB/T 1808-2005    电极挤压液压机
▪  JB/T 1881-1999    切边液压机 型式与基本参数
▪  JB/T 2001.29-1999    水系统 液压闸阀芯(PN=20、31.5MPa)
▪  JB/T 2001.30-1999    水系统 液压闸阀(PN=31.5MPa)
▪  JB/T 2001.31-1999    水系统 液压闸阀(PN=20MPa)
▪  JB/T 2098-1999    单臂冲压液压机 型式与基本参数
▪  JB/T 2162-2007    冶金设备用液压缸(PN≤16MPa)
▪  JB/T 2184-1007    液压元件 型号编制方法
▪  JB/T 2474-1999    液压螺旋压力机 基本参数
▪  JB/T 2501-2000    单缸液压圆锥破碎机
▪  JB/T 3277-2004    矿井提升机和矿用提升绞车 液压站
▪  JB/T 3298-1996    手动液压托盘搬运车
▪  JB/T 3299-1999    手动插腿式液压叉车
▪  JB/T 3582-1999    砧座微动型液压模锻锤 基本参数
▪  JB/T 3790.3-1994    液压式自动捆扎机
▪  JB/T 3818-1999    液压机 技术条件
▪  JB/T 3819-1984    粉末制品液压机 精度
▪  JB/T 3820-1984    塑料制品液压机 精度
▪  JB/T 3821-1984    双动薄板拉伸液压机 精度
▪  JB/T 3843-1999    液压机 紧固模具用槽、孔的分布形式与尺寸
▪  JB/T 3844-1985    金属挤压液压机 精度
▪  JB/T 3844.1-1999    金属挤压液压机 基本参数
▪  JB/T 3863-1999    磨料制品液压机 型式与基本参数
▪  JB/T 3864-1985    磨料制品液压机 精度
▪  JB/T 3967-1999    液压操纵耙斗装岩机
▪  JB/T 4030.3-2000    汽车起重机和轮胎起重机试验规范 液压系统试验
▪  JB/T 4109.1-1999    中小型液压闸门启闭机 基本参数
▪  JB/T 4115-1999    液压泵、液压马达侧板用烧结双金属板材
▪  JB/T 4174-1986    液压机 名词术语
▪  JB/T 4413-1999    液压灌肠机
▪  JB/T 5120-2000    摆线转阀式全液压转向器
▪  JB/T 5121-1991    KJ型液压快换接头
▪  JB/T 5122-1991    ZG1 系列单作用柱塞式液压缸
▪  JB/T 5123-1991    SG1 系列双作用单活塞杆液压缸
▪  JB/T 5124-1991    TG1 系列伸缩式套筒液压缸
▪  JB/T 5178-2002    轮式拖拉机静液压转向系统 技术条件
▪  JB/T 5183-2002    轮式拖拉机静液压转向系统 试验方法
▪  JB/T 5244-2001    液压阀用电磁铁
▪  JB/T 5557-2007    液压转矩扳手
▪  JB/T 5920.1-1991    内曲线（向外作用）式低速大扭矩液压马达安装法兰和轴伸的尺寸系列 20-25MPa的轴转马达
▪  JB/T 5921-2006    液压系统用冷却器 基本参数
▪  JB/T 5922-2005    液压二通插装阀 图形符号
▪  JB/T 5924-1991    液压元件压力容腔体的额定疲劳压力和额定静态压力验证方法
▪  JB/T 5953-1991    液压锤 系列参数及技术条件
▪  JB/T 5963-2004    液压二通、三通、四通螺纹式插装阀 插装孔
▪  JB/T 5998-2007    拖拉机液压提升器 技术条件
▪  JB/T 6105-2007    数控机床液压泵站 技术条件
▪  JB/T 611-1991    液压机 主参数系列
▪  JB/T 6134-2006    冶金设备用液压缸(PN≤25MPa)
▪  JB/T 6406-2006    电力液压鼓式制动器
▪  JB/T 6452-1992    电力液压推动器 基本技术要求
▪  JB/T 6584-1993    磁性材料液压机 技术条件
▪  JB/T 6683-1993    液压转向器配套用组合阀块
▪  JB/T 6714.1-2007    农业拖拉机液压悬挂系统 技术条件
▪  JB/T 6714.2-2007    农业拖拉机液压悬挂系统 试验方法
▪  JB/T 6996-2007    重型机械液压系统 通用技术条件
▪  JB/T 6998-1993    25MN金刚石液压机
▪  JB/T 7017-1993    起重机用液压缓冲器
▪  JB/T 7020-2006    电力液压盘式制动器
▪  JB/T 7033-2007    液压传动 测量技术通则
▪  JB/T 7034-2006    液压隔膜式蓄能器 型式和尺寸
▪  JB/T 7035-2006    液压囊式蓄能器 型式和尺寸
▪  JB/T 7036-2006    液压隔离式蓄能器 技术条件
▪  JB/T 7037-2006    液压隔离式蓄能器 试验方法
▪  JB/T 7038-2006    液压隔离式蓄能器 壳体 技术条件
▪  JB/T 7039-2006    液压叶片泵
▪  JB/T 7041-2006    液压齿轮泵
▪  JB/T 7043-2006    液压轴向柱塞泵
▪  JB/T 7046-2006    液压蓄能器压力容腔体的额定疲劳压力和额定静态压力验证方法
▪  JB/T 7152.1-1993    轮胎式装载机 全液压式动力转向器技术条件
▪  JB/T 7169-2004    导轨式液压凿岩机
▪  JB/T 7177-1993    精密冲裁液压机 精度
▪  JB/T 7316-2005    谷物联合收割机 液压系统试验方法
▪  JB/T 7343-1994    单双动薄板冲压液压机
▪  JB/T 7355-2007    AYL液压安全联轴器
▪  JB/T 7678-2007    双动厚板冲压液压机
▪  JB/T 7857-2006    液压阀污染敏感度评定方法
▪  JB/T 7858-2006    液压元件清洁度评定方法及液压元件清洁度指标
▪  JB/T 7926-1995    液压快换接头 技术条件（农业拖拉机和机具用）
▪  JB/T 7938-1999    液压泵站油箱公称容量系列
▪  JB/T 7939-1999    单活塞杆液压缸两腔面积比
▪  JB/T 8288-1995    液压振动台
▪  JB/T 8302-2000    农业拖拉机和机具液压输出快换接头 技术条件
▪  JB/T 8461-1996    液压锥套
▪  JB/T 8469-1996    全液压静力压桩机
▪  JB/T 8492-1996    单动薄板冲压液压机 基本参数
▪  JB/T 8493-1996    双动薄板拉伸液压机 基本参数
▪  JB/T 8494-1996    金属打包液压机 技术条件
▪  JB/T 8710-1998    液压防爆提升机和提升绞车
▪  JB/T 8727-2004    液压软管 总成
▪  JB/T 8728-1998    低速大扭矩液压马达
▪  JB/T 8729.1-1998    液压多路换向阀 技术条件
▪  JB/T 8729.2-1998    液压多路换向阀 试验方法
▪  JB/T 8779-1998    超硬材料六面顶液压机 技术条件
▪  JB/T 8814-1998    大功率推土机水冷式液压油冷却器技术条件
▪  JB/T 9090-1999    容积泵零部件液压与渗漏试验
▪  JB/T 9157-1999    液压气动用球涨式堵头 安装尺寸
▪  JB/T 9737.1-2000    汽车起重机和轮胎起重机液压油 固体颗粒污染等级
▪  JB/T 9737.2-2000    汽车起重机和轮胎起重机液压油 固体颗粒污染测量方法
▪  JB/T 9737.3-2000    汽车起重机和轮胎起重机液压油 选择与更换
▪  JB/T 9751-1999    柴油机 液压调速器 技术条件
▪  JB/T 9794.1-1999    农用液压榨油机 技术条件
▪  JB/T 9794.2-1999    农用液压榨油机 试验方法
▪  JB/T 9829-1999    轮式拖拉机开心式静液压转向系统 试验方法
▪  JB/T 9839-1999    摆线转阀式闭心静液压转向器 技术条件
▪  JB/T 9885-1999    组合机床 液压滑台 技术条件
▪  JB/T 9954-1999    锻压机械液压系统 清洁度
▪  JB/T 9957.1-1999    四柱液压机 性能试验方法
▪  JB/T 9957.2-1999    四柱液压机 型式与基本参数
▪  JB/T 9958.1-1999    单柱液压机 型式与基本参数
▪  JB/T 9958.2-1999    单柱液压机 精度
▪  JB/T 9966-1999    液压铆接机
▪  JC/T 910-2003    陶瓷砖自动液压机
▪  JC/T 965-2005    墙材工业用液压多斗取料机
▪  MT 112.1-2006    矿用单体液压支柱 第1部分 通用要求
▪  MT 214.2-1990(2005)    提升容器钢丝绳悬挂装置 螺旋液压调绳器
▪  MT 324-1993(2005)    双柱并列式液压切顶支柱
▪  MT 458-1995(2005)    滑移顶梁液压支架通用技术条件
▪  MT 76-2002    液压支架（柱）用乳化油、浓缩物及其高含水液压液
▪  MT/T 118-1985(2005)    一次成型液压锻钎机通用技术条件
▪  MT/T 151-1996    矿用液压推溜器
▪  MT/T 243-1991(2005)    煤矿井下液压偶合器用高含水难燃液
▪  MT/T 269-1992    液压驱动式动筛跳汰机
▪  MT/T 291.2-1995    悬臂式掘进机 液压缸检验规范
▪  MT/T 311-1992    采煤机牵引液压系统滤油器型式和基本参数
▪  MT/T 335-1995(2005)    单体液压支柱 表面防腐蚀处理技术条件
▪  MT/T 418-1995(2005)    液压升柱器
▪  MT/T 459-1995    煤矿机械用液压元件通用技术条件
▪  MT/T 472-1996    悬臂式掘进机 液压缸内径活塞杆及销轴直径系列
▪  MT/T 487-1995    矿用摆线液压马达试验方法
▪  MT/T 488-1995    矿用摆线液压马达产品质量分等
▪  MT/T 489-1995    矿用液压轴向柱塞泵试验方法
▪  MT/T 490-1995    矿用液压斜盘式轴向柱塞泵产品质量分等
▪  MT/T 516.1-1995(2005)    煤矿液压凿岩机用钎具 波形螺纹
▪  MT/T 516.2-1995(2005)    煤矿液压凿岩机用钎具 钎头
▪  MT/T 516.3-1995(2005)    煤矿液压凿岩机用钎具 钎杆
▪  MT/T 516.4-1995(2005)    煤矿液压凿岩机用钎具 接杆套
▪  MT/T 516.5-1995(2005)    煤矿液压凿岩机用钎具 接杆钎尾
▪  MT/T 544-1996    矿用液压斜轴式轴向柱塞马达试验方法
▪  MT/T 545-1996    矿用液压斜轴式轴向柱塞马达产品质量分等
▪  MT/T 546-1996    矿用液压斜轴式轴向柱塞泵产品质量分等
▪  MT/T 572-1996    矿用液压多路换向阀试验方法
▪  MT/T 573-1996    矿用液压齿轮泵试验方法
▪  MT/T 581-1996    矿用内曲线液压马达试验方法
▪  MT/T 765-1997(2005)    液压支架用自动喷雾控制阀通用技术条件
▪  MT/T 776-2004    煤矿机械液压系统总成出厂检验规范
▪  MT/T 827-2005    煤矿机械液压系统通用技术条件
▪  MT/T 85-1999    采煤机液压元件试验规范
▪  MT/T 900-2000    采掘机械用液压缸技术条件
▪  MT/T 913-2002    矿用液压螺母及其高强度紧固件尺寸系列和技术条件
▪  MT/T 973－2006    钢绞线液压剪
▪  MT/T 974－2006    煤矿用单体液压锚杆钻机
▪  MT/T 98-2006    液压支架用软管及软管总成检验规范
▪  MTl 93-1989(2005)    矿用液压切顶支柱
▪  QB/T 1068-1991    液压推车机
▪  QB/T 1765-1993    液压自动压砖机
▪  QC/T 29104-1992(2005)    专用汽车液压系统液压油固体污染度限值
▪  QC/T 29105.1-1992(2005)    专用汽车液压系统液压油固体污染度测试方法 术语及其定义
▪  QC/T 29105.2-1992(2005)    专用汽车液压系统液压油固体污染度测试方法 装置及装置的清洗
▪  QC/T 29105.3-1992(2005)    专用汽车液压系统液压油固体污染度测试方法 取样
▪  QC/T 29105.4-1992(2005)    专用汽车液压系统液压油固体污染度测试方法 显微镜颗粒计数法
▪  QC/T 311-1999(2005)    汽车液压制动主缸技术条件
▪  QC/T 460-1999(2005)    自卸汽车液压缸技术条件
▪  QC/T 593-1999(2005)    液压感载比例阀技术条件
▪  QC/T 764-2006    汽车液压制动系 金属管、内外螺纹管接头和软管端部接头
▪  QC/T 77-1993(2005)    汽车液压制动轮缸技术条件
▪  SD 113-1983(2005)    水利平面闸门液压启闭机基本参数（6－100t2*6-2*100t)
▪  SD 114-1983(2005)    水利平面快速闸门液压启闭机基本参数（6－100t）
▪  SD 207-1987(2005)    QPPY系列液压启闭机
▪  SDJ 226-1987(2005)    架空送电线路导线及避雷线液压施工工艺规程
▪  SH 0358-1995(2005)    10号航空液压油
▪  SH/T 0208-1992(2003)    航空液压油热氧化安定性及腐蚀测定法
▪  SH/T 0209-1992(2003)    液压油热稳定性测定法
▪  SH/T 0210-1992(2003)    液压油过滤性试验法
▪  SH/T 0301-1993(2003)    液压液水解安定性测定法（玻璃瓶法）
▪  SH/T 0307-1992(2006年确认)    石油基液压油磨损特性测定法（叶片泵法）
▪  SH/T 0567-1993    难燃液压液歧管着火试验法
▪  SH/T 0644-1997(2003)    航空液压油低温稳定性试验法
▪  SH/T 0752-2005    含水难燃液压液抗腐蚀性测定法
▪  SH/T 0787-2006    石油基液压油高压叶片泵磨损特性测定法
▪  SH/T 0795-2007    HFAE型难燃液压液乳化稳定性测定法
▪  SL 39-1992(2005)    露顶式弧形闸门液压启闭机系列标准
▪  SY/T 0525.1-1993    石油储罐液压安全阀
▪  SY/T 5250-1991(2005)    YBG-2500型液压背罐车技术条件
▪  SY/T 5443-2001    地面防喷器控制装置专用液压气动元件
▪  SY/T 5791-2007    液压修井机立放井架作业规程
▪  SY/T 6160-1995    液压防喷器的检查与修理
▪  YB 9246-1992    液压及润滑设备安装工程质量评定标准
▪  YB/T 016-1992(2005)    废钢液压剪切机
▪  YB/T 017-1992(2005)    液压泥炮技术条件
▪  YB/T 028-1992(2005)    冶金设备用液压缸
▪  YB/T 064-1994(2005)    液压抓具
▪  YBJ 207-1985    冶金设备安装工程质量验收规范（液压、气动、润滑设备系统）
▪  YS/T 55-1992(2005)    液压碎石器
▪  YS/T 8-1991(2005)    铝锭液压式半连续铸造机

▪    IEC 60092-204-1987    船舶电气设施 第204部分:系统设计 电动和电动液压操舵装置    Electrical installations in ships. Part 204 : System design. Electric and electrohydraulic steering gear
▪    IEC 62237-2003    带电作业.液压工具和设备用带配件的绝缘软管    Live working - Insulating hoses with fittings for use with hydraulic tools and equipment
▪    ISO 10100-2001    液压传动 缸筒 验收试验    Hydraulic fluid power - Cylinders - Acceptance tests
▪    ISO 10262-1998    土方机械 液压挖掘机 司机防护装置的实验室试验和性能要求    Earth-moving machinery - Hydraulic excavators - Laboratory tests and performance requirements for operator protective guards
▪    ISO 10332-1994    压力用途的无缝钢管和焊接(埋弧焊除外)钢管 验证液压防泄漏用超声波检验    Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; ultrasonic testing for verification of hydraulic leak-tightness
▪    ISO 10372-1992    液压传动 四油口和五油口伺服阀 安装面    Hydraulic fluid power; four- and five-port servovalves; mounting surfaces
▪    ISO 10448-1994    农业拖拉机 器具用液压动力    Agricultural tractors - Hydraulic pressure for implements
▪    ISO 10567-1992    土方机械 液压挖掘机 提升能力    Earth-moving machinery; hydraulic excavators; lift capacity
▪    ISO 10592-1994    小艇 液压操舵系统    Small craft - Hydraulic steering systems
▪    ISO 10762-1997    液压传动 缸筒安装尺寸 10 MPa(100 bar)系列    Hydraulic fluid power - Cylinder mounting dimensions - 10 MPa (100 bar) series
▪    ISO 10763-1994    液压传动 端面平齐的无缝和焊接型精密钢管 尺寸及标称工作压力    Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures
▪    ISO 10767-1-1996    液压传动 系统和元件产生压力波动值的测定 第1部分:用于泵的精密方法    Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 1: Precision method for pumps
▪    ISO 10767-2-1999    液压传动 系统和元件产生压力波动值的测定 第2部分:用于泵的简化方法    Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 2: Simplified method for pumps
▪    ISO 10767-3-1999    液压传动 系统和元件产生压力波动值的测定 第3部分:用于马达的方法    Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 3: Method for motors
▪    ISO 10770-1-1998    液压传动 电调制液压控制阀 第1部分:四通流量控制阀的试验方法    Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-way directional flow control valves
▪    ISO 10770-2-1998    液压传动 电调制液压控制阀 第2部分:三通流量控制阀的试验方法    Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directional flow control valves
▪    ISO 10771-1-2002    液压传动.金属压力容器外层的压力疲劳试验.第1部分:试验方法    Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method
▪    ISO 10945-1994    液压传动 充气蓄能器 气口尺寸    Hydraulic fluid power - Gas-loaded accumulators - Dimensions of gas ports
▪    ISO 10946-1999    液压传动 隔离式充气蓄能器 优先选择的液压油口    Hydraulic fluid power - Gas-loaded accumulators with separator - Selection of preferred hydraulic ports
▪    ISO 11158-1997    润滑剂、工业润滑油和有关产品(L类) H组(液压系统) HH、HL、HM、HR、HV和HG各品种的规格    Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HR, HV and HG
▪    ISO 11170-2003    液压传动.滤芯.性能特性检验的试验序列    Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics
▪    ISO 11171 Technical Corrigendum 1-2001    液压传动 液体自动颗粒计数器的校准 技术勘误1    Hydraulic fluid power - Calibration of automatic particle counters for liquids; Technical Corrigendum 1
▪    ISO 11171-1999    液压传动 液体自动颗粒计数器的校准    Hydraulic fluid power - Calibration of automatic particle counters for liquids
▪    ISO 11217-1993    航空航天 液压系统液体污染物 取样点位置和取样准则    Aerospace; hydraulic system fluid contamination; location of sampling points and citeria for sampling
▪    ISO 11218-1993    航空航天 液压油液清洁度分级    Aerospace; cleanliness classification for hydraulic fluids
▪    ISO 11237-1-2004    橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.第1部分:用于油基液体    Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Part 1: Oil-based fluid applications
▪    ISO 11237-2-2006    橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.第2部分:用于水基液体    Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Part 2: Water-based fluid applications
▪    ISO 11425-1996    机动车液压转向装置用橡胶软管和软管组件 规范    Rubber hoses and hose assemblies for automobile power-steering systems - Specification
▪    ISO 11471-1995    农业拖拉机和机械 遥控液压传动装置和控制装置的编码    Agricultural tractors and machinery - Coding of remote hydraulic power services and controls
▪    ISO 11500 Technical Corrigendum 1-1998    液压传动 用遮光法自动计测定颗粒污染物 技术勘误1    Hydraulic fluid power - Determination of particulate contamination by automatic counting using the light extinction principle; Technical Corrigendum 1
▪    ISO 11500-1997    液压传动 用遮光法自动计测定颗粒污染物    Hydraulic fluid power - Determination of particulate contamination by automatic counting using the light extinction principle
▪    ISO 11530-1993    道路车辆 液压千斤顶 规范    Road vehicles; hydraulic jacks; specifications
▪    ISO 11926-1-1995    通用和液压传动用联接件 带ISO 725螺纹和O形圈密封的油口和螺纹端头 第1部分:锪孔沟槽中装有O形密封圈的油    Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing
▪    ISO 11926-2-1995    通用和液压传动用联接件 带ISO 725螺纹和O形圈密封的油口和螺纹端头 第2部分:重型(S 系列)螺栓端头    Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 2: Heavy-duty (S series) stud ends
▪    ISO 11926-3-1995    通用和液压传动用联接件 带ISO 725螺纹和O形圈密封的油口和螺纹端头 第3部分:轻型(L 系列)螺栓端头    Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends
▪    ISO 11943-1999    液压传动 在线液体自动颗粒计数系统 校准和验证的方法    Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation
▪    ISO 12130-1-2001    滑动轴承 静态条件下液压斜垫止推滑动轴承 第1部分：斜垫止推轴承的计算    Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 1: Calculation of tilting pad thrust bearings
▪    ISO 12130-2-2001    滑动轴承 静态条件下液压斜垫止推滑动轴承 第2部分：斜垫止推轴承的功能    Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 2: Functions for calculation of tilting pad thrust bearings
▪    ISO 12130-3-2001    滑动轴承 静态条件下液压斜垫止推滑动轴承 第3部分：斜垫止推轴承计算用指导值    Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 3: Guide values for the calculation of tilting pad thrust bearings
▪    ISO 12151-1-1999    液压传动和通用联接件 软管接头 第1部分:带ISO 8434-3 O形圈端面密封末端的软管接头    Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
▪    ISO 12151-2-2003    液压传动和通用联接件.软管接头.第2部分:带ISO 8434-1 O形圈24锥形末端的软管接头    Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings
▪    ISO 12151-3-1999    液压传动和通用联接件 软管接头 第3部分:带ISO6162法兰末端的软管接头    Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends
▪    ISO 12167-1-2001    滑动轴承 静态条件下带有排泄槽的液压滑动轴颈轴承 第1部分：带有排泄槽的润滑油滑动轴颈轴承的计算    Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
▪    ISO 12167-2-2001    滑动轴承 静态条件下带有排泄槽的液压滑动轴颈轴承 第2部分：带有排泄槽的润滑油滑动轴颈轴承的计算用特    Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves
▪    ISO 12168-1-2001    滑动轴承 静态条件下不带排泄槽的液压滑动轴颈轴承 第1部分：不带排泄槽的润滑油滑动轴颈轴承的计算    Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves
▪    ISO 12168-2-2001    滑动轴承 静态条件下不带排泄槽的液压滑动轴颈轴承 第1部分：不带排泄槽的润滑油滑动轴颈轴承的计算用特    Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves
▪    ISO 12333-2000    航空航天 连续置换液压马达 35000 kPa系统的一般规范    Aerospace - Constant-displacement hydraulic motors - General specifications for 35000 kPa systems
▪    ISO 12334-2000    航空航天 带压力补偿的变流量液压泵 35000 kPa系统的一般要求    Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems
▪    ISO 12922 Technical Corrigendum 1-2001    润滑剂、工业润滑油和有关产品(L类) H组(液压系统) HFAE、HFAS、HFB、HFC、HFDR和HFDU各品种的规格 技术勘    Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU; Technical Corrigendum 1
▪    ISO 12922-1999    润滑剂、工业润滑油和有关产品(L类) H组(液压系统) HFAE、HFAS、HFB、HFC、HFDR和HFDU各品种的规格    Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
▪    ISO 13486-1-1999    道路车辆 液压制动系统 第1部分:双喇叭口管、螺纹孔、阳螺纹管接头和管座    Road vehicles - Hydraulic braking systems - Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
▪    ISO 13726-1998    液压传动 单杆缸、16MPa(160bar)缸径250mm～500mm的小型系列 附件安装尺寸    Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions
▪    ISO 13938-1-1999    纺织品 织物胀破特性 第1部分:胀破强力测定的液压方法    Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension
▪    ISO 13984-1999    液压 道路车辆燃油系统界面    Liquid hydrogen - Land vehicle fuelling system interface
▪    ISO 1402-1994    橡胶和塑料软管和软管组件 液压试验    Rubber and plastics hoses and hose assemblies - Hydrostatic testing
▪    ISO 1436-1-2001    橡胶软管和软管组件 金属丝编制物增强液压管规格 第1部分：油基流体应用    Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types; Specification - Part 1: Oil-based fluid applications
▪    ISO 1436-2-2005    橡胶软管和软管组件.金属丝编织增强液压类型.规范.第2部分：水基流体设施    Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types - Specification - Part 2: Water-based fluid applications
▪    ISO 14617-10-2002    图表用图形符号.第10部分:液压变流器    Graphical symbols for diagrams - Part 10: Fluid power converters
▪    ISO 15086-1-2001    液压传动 部件和系统的流体噪声特性的测定 第1部分：引言    Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 1: Introduction
▪    ISO 15086-2-2000    液压传动 元件和系统油液通过孔径噪声特性的测定 第2部分:管路油液中声音速度的测定    Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 2: Measurement of speed of sound in a fluid in a pipe
▪    ISO 15171-1-1999    用于流体传动和一般用途的管接头 诊断用液压管接头 第1部分:非压力下连接的管接头    Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure
▪    ISO 15171-2-2000    用于流体传动和一般用途的管接头 诊断用液压管接头 第2部分:带M16×2螺纹端的压力连接接头    Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 × 2 end for connection under pressure
▪    ISO 15363-2000    金属材料 管式环液压试验    Metallic materials - Tube ring hydraulic pressure test
▪    ISO 15380-2002    润滑剂、工业用油和相关产品(L类).系列H(液压系统).HETG, HEPG, HEES 和 HEPR类的规范    Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR
▪    ISO 15734-2001    小艇 液压静力释放装置    Ships and marine technology - Hydrostatic release units
▪    ISO 15853-1999    热塑性塑料 为测定注塑用材料的静液压强度的管状试样的准备    Thermoplastic materials - Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
▪    ISO 16028 AMD 1-2006    液压传动.在20MPa(200巴)至31.5MPa(315巴)压力下使用的平面对接型快速接头.规范.修改件1    Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications; Amendment 1
▪    ISO 16028-1999    液压传动 用于压力为20 MPa(200 bar)～31.5 MPa(315 bar)的平面对接型快速接头 规范    Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications
▪    ISO 16031-1-2002    航空航天液压系统.英制系列O型密封圈:内直径和横截面,公差和尺寸认证编码.第1部分:液压系统近似公差    Aerospace fluid systems - O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes - Part 1: Close tolerances for hydraulic systems
▪    ISO 16031-2-2003    航空航天流体系统.英制系列O型密封圈:内直径和横截面、公差和尺寸识别码.第2部分:非液压系统的标准公差    Aerospace fluid systems - O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes - Part 2: Standard tolerances for non-hydraulic systems
▪    ISO 16656-2004    液压传动.10MPa(100 bar)下用的缸径在32 mm 到 100 mm的单杆、短冲程气缸.安装尺寸    Hydraulic fluid power - Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) - Mounting dimensions
▪    ISO 16860-2005    液压传动.过滤器.差压装置试验方法    Hydraulic fluid power - Filters - Test method for differential pressure devices
▪    ISO 16873 AMD 1-2005    液压传动.压力开关.安装表面.修改件1    Hydraulic fluid power - Pressure switches - Mounting surfaces; Amendment 1
▪    ISO 16873-2002    液压传动.压力开关.安装表面    Hydraulic fluid power - Pressure switches - Mounting surfaces
▪    ISO 16874-2004    液压传动.歧管及其元件的标识    Hydraulic fluid power - Identification of manifold assemblies and their components
▪    ISO 16889-1999    液压传动过滤器 评价滤芯过滤性能的多次通过法    Hydraulic fluid power filters - Multi-pass method for evaluating filtration performance of a filter element
▪    ISO 16902-1-2003    液压传动.用声强法测定声功率级的试验规程:工程法.第1部分:泵    Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques: Engineering method - Part 1: Pumps
▪    ISO 17559-2003    液压流体动力.电控液压泵.性能特征测定的试验方法    Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics
▪    ISO 17567-2005    农业和林业用拖拉机和全套工具.超液压动力    Agricultural and forestry tractors and implements - Hydraulic power beyond
▪    ISO 18413-2002    液压传动.部件和元件的清洁度.与污物收集、分析和数据报告相关的检验文件和原则    Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting
▪    ISO 19879-2005    液压和一般用途用金属管连接件.液压传动连接件的试验方法    Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
▪    ISO 20401 Technical Corrigendum 1-2005    气动液压驱动系统.方向控制阀.直径在8mm到12mm的圆形电连接器管脚分布的规范.技术勘误1    Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm; Technical Corrigendum 1
▪    ISO 20401-2005    气动液压驱动系统.方向控制阀.直径在8mm到12mm的圆形电连接器管脚分布的规范    Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
▪    ISO 2057-1981    农业拖拉机 拖挂农具的遥控液压缸    Agricultural tractors; Remote control hydraulic cylinders for trailed implements
▪    ISO 20763-2004    石油和相关产品.液压液耐磨性的测定.叶轮泵法    Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
▪    ISO 20843-2003    石油和相关产品.HFAE、HFAS和HFC类别中抗燃液压油pH值的测定    Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
▪    ISO 2941-1974    液压传动 滤芯 抗破裂性的验证    Hydraulic fluid power; Filter elements; Verification of collapse/burst resistance
▪    ISO 2942-2004    液压传动.滤芯.结构完整性的验证和第一气泡点的测定    Hydraulic fluid power - Filter elements - Verification of fabrication integrity and determination of the first bubble point
▪    ISO 2943-1998    液压传动 滤芯 材料和油液相溶性的验证    Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids
▪    ISO 3019-1-2001    液压传动 活塞泵和马达的安装法兰和轴端的尺寸和标识码 第1部分：用米制单位表示的英制系列    Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units
▪    ISO 3019-2-2001    液压传动 活塞泵和马达的安装法兰和轴端的尺寸和标识码 第2部分：米制系列    Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series
▪    ISO 3174-1994    航空器 用地面设备检查液压系统的连接接头 螺纹式    Aircraft - Connections for checking hydraulic systems by ground appliances - Threaded type
▪    ISO 3323-1987    航空器 液压组件 表明液压组件被批准适用油液的标志    Aircraft; Hydraulic components; Marking to indicate fluid for which component is approved
▪    ISO 3662-1976    液压传动 泵和马达 几何排量    Hydraulic fluid power; Pumps and motors; Geometric displacements
▪    ISO 3722-1976    液压传动 油液取样容器 净化方法的鉴定和控制    Hydraulic fluid power; Fluid sample containers; Qualifying and controlling cleaning methods
▪    ISO 3723-1976    液压传动 滤芯 端载荷试验方法    Hydraulic fluid power; Filter elements; Method for end load test
▪    ISO 3724-1976    液压传动 滤芯 流动疲劳特性的验证    Hydraulic fluid power; Filter elements; Verification of flow fatigue characteristics
▪    ISO 3803-1984    道路车辆 制动装置的液压试验连接    Road vehicles; Hydraulic pressure test connection for braking equipment
▪    ISO 3862-1-2001    橡胶软管和软管组件 覆盖螺旋金属丝的橡胶增强液压软管 规范 第1部分：油基流体的应用    Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types; Specification - Part 1: Oil-based fluid applications
▪    ISO 3862-2-2005    橡胶软管和软管组件.橡胶包覆的螺旋金属丝增强液压类型.规范.第2部分：水基流体设施    Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types - Specification - Part 2: Water-based fluid applications
▪    ISO 3938-1986    液压传动 污染分析 报告分析数据的方法    Hydraulic fluid power; Contamination analysis; Method for reporting analysis data
▪    ISO 3949-2004    塑料软管和软管组件.织物增强型液压软管.规范    Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification
▪    ISO 3968 Technical Corrigendum 1-2002    液压传动.过滤器.压降与流量特性关系的测定.技术勘误:1    Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics; Technical Corrigendum 1
▪    ISO 3968-2001    液压传动 过滤器 压降与流量特性关系的评估    Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics
▪    ISO 3996-1995    道路车辆 使用非石油基制动液的液压制动系统软管组件    Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
▪    ISO 4021-1992    液压传动 颗粒污染分析 从工作系统管路中提取油样    Hydraulic fluid power; particulate contamination analysis; extraction of fluid samples from lines of an operating system
▪    ISO 4038-1996    道路车辆 液压制动系统 单喇叭口管、螺孔和阳螺纹接头和软管管端接头    Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings
▪    ISO 4079-1-2001    橡胶软管和软管组件 织物增强液压软管 规范 第1部分：油基流体的应用    Rubber hoses and hose assemblies - Textile-reinforced hydraulic types; Specification - Part 1: Oil-based fluid applications
▪    ISO 4079-2-2005    橡胶软管和软管组件.织物增强液压型.规范.第2部分:水基流体的应用    Rubber hoses and hose assemblies - Textile-reinforced hydraulic types - Specification - Part 2: Water-based fluid applications
▪    ISO 4126-4-2004    过压保护安全设备.第4部分:液压控制安全阀    Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves
▪    ISO 4263-2-2003    石油及相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第2部分:HFC类液压液测定规程    Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for category HFC hydraulic fluids
▪    ISO 4263-3-2006    石油及相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第2部分:合成液压液的无水程序    Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids
▪    ISO 4391-1983    液压传动 泵、马达和整体式传动装置 参数定义和字母符号    Hydraulic fluid power; Pumps, motors and integral transmissions; Parameter definitions and letter symbols
▪    ISO 4392-1-2002    液压传动.马达特性的测定.第1部分:在恒低速和恒压力下的测定    Hydraulic fluid power - Determination of characteristics of motors - Part 1: At constant low speed and constant pressure
▪    ISO 4392-2-2002    液压传动.马达特性的测定.第2部分:起动性    Hydraulic fluid power - Determination of characteristics of motors - Part 2: Startability
▪    ISO 4392-3-1993    液压传动 马达特性的测定 第3部分:在恒流量和恒转矩下    Hydraulic fluid power; determination of characteristics of motors; part 3: at constant flow and at constant torque
▪    ISO 4401-2005    液压传动.四油口定向控制阀.装配面    Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
▪    ISO 4404-1-2001    石油及有关产品 耐火液压油液的抗腐蚀性的测定 第1部分：含水油液    Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids
▪    ISO 4404-2-2003    石油和相关产品.难燃液压液抗腐蚀性的测定.第2部分:不含水油液    Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids
▪    ISO 4405-1991    液压传动 油液污染度 采用重量法测定颗粒污染度    Hydraulic fluid power; fluid contamination; determination of particulate contamination by the gravimentric method
▪    ISO 4406-1999    液压传动 油液 固体颗粒污染等级代号法    Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
▪    ISO 4407-2002    液压传动.液压液污染.用光学显微镜计数法测定粒状物污染    Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
▪    ISO 4409-1986    液压传动 容积式泵、马达和整体式传动装置 稳态性能测定    Hydraulic fluid power; Positive displacement pumps, motors and integral transmissions; Determination of steady-state performance
▪    ISO 4411-1986    液压传动 阀 压差/流量特性的测定    Hydraulic fluid power; Valves; Determination of pressure differential/flow characteristics
▪    ISO 4412-1-1991    液压传动 空气噪声级测定的试验规范 第1部分:泵    Hydraulic fluid power; test code for determination of airborne noise levels; part 1: pumps
▪    ISO 4412-2-1991    液压传动 空气噪声级测定的试验规范 第2部分:马达    Hydraulic fluid power; test code for determination of airborne noise levels; part 2: motors
▪    ISO 4412-3-1991    液压传动 空气噪声级测定的试验规范 第3部分:泵 采用平行六面体传声器阵列的方法    Hydraulic fluid power; test code for determination of airborne noise levels; part 3: pumps; method using a parallelepiped microphone array
▪    ISO 4413-1998    液压传动 与系统相关的一般规则    Hydraulic fluid power - General rules relating to systems
▪    ISO 4548-5-1990    内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久性试验    Methods of test for full-flow lubricating oil filters for internal combustion engines; part 5: cold start simulation and hydraulic pulse durability test
▪    ISO 4925-2005    道路车辆.液压系统用非石油基制动液的规范    Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems
▪    ISO 4926-1978    道路车辆 液压制动系统 非石油基基准液    Road vehicles; Hydraulic brake systems; Non-petroleum base reference fluids
▪    ISO 4927-2005    道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度120℃)    Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
▪    ISO 4929-1978    道路车辆 使用非石油基液压制动液的液压制动主液压缸储油器的膜片密封垫    Road vehicles; Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
▪    ISO 4930-2006    道路车辆.使用非石油基液压制动液的液压制动盘式液压缸的弹性密封垫(最高工作温度150℃)    Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150° C max.)
▪    ISO 5198-1987    离心泵、混流泵和轴流泵 液压性能试验规范 精密级    Centrifugal, mixed flow and axial pumps; Code for hydraulic performance tests; Precision grade
▪    ISO 5596-1999    液压传动 隔离式充气蓄能器 压力、容积范围和特性量    Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities
▪    ISO 5597-1987    液压传动 缸筒 往复用活塞和活塞杆密封沟槽 尺寸和公差    Hydraulic fluid power; Cylinders; Housings for piston and rod seals in reciprocating applications; Dimensions and tolerances
▪    ISO 5669-1982    农业挂车和挂车设备 制动液压缸 规范    Agricultural trailers and trailed equipment; Braking cylinders; Specifications
▪    ISO 5670-1984    农业挂车 单向作用的伸缩倾翻式液压缸 25 MPa(250巴)系列 1、2和3型 互换性尺寸    Agricultural trailers; Single-acting telescopic tipping cylinders; 25 MPa (250 bar) series; Types 1, 2 and 3; Interchangeability dimensions
▪    ISO 5675-1992    农业拖拉机和机械 一般用途快速液压接头    Agricultural tractors and machinery; general purpose quick-action hydraulic couplers
▪    ISO 5676-1983    农林用拖拉机和机械 液压接头 制动回路    Tractors and machinery for agriculture and forestry; Hydraulic coupling; Braking circuit
▪    ISO 5682-2-1997    作物保护设备 喷雾设备 第2部分:液压喷雾机的试验方法    Equipment for crop protection - Spraying equipment - Part 2: Test methods for hydraulic sprayers
▪    ISO 5682-3-1996    作物保护设备 喷雾设备 第3部分:农业液压喷雾器每公顷施药体积量调节系统的试验方法    Equipment for crop protection - Spraying equipment - Part 3: Test method for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers
▪    ISO 5781-2000    液压传动 压力控制阀(不包括溢流阀)、顺序阀、卸荷阀、节流阀和单向阀 安装面    Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces
▪    ISO 5783-1995    液压传动 阀安装面和插装阀孔的标识规则    Hydraulic fluid power - Code for identification of valve mounting surfaces and cartridge valve cavities
▪    ISO 5859-1991    航空航天 液压气动系统和组件原理图用图形符号    Aerospace; graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
▪    ISO 5884-1987    航空航天 流体系统和组件 液压油液固体颗粒污染的系统取样和测量方法    Aerospace; Fluid systems and components; Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
▪    ISO 6015-2006    土方机械.液压挖掘机和反铲装载机.挖掘力的测量方法    Earth-moving machinery - Hydraulic excavators and backhoe loaders - Methods of determining tool forces
▪    ISO 6020-1-1998    液压传动 单杆缸安装尺寸,16 MPa(160 bar)系列 第1部分:中型系列    Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series
▪    ISO 6020-2-2006    液压传动.单杆缸安装尺寸,16 MPa(160 bar)系列.第2部分:小型系列    Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2: Compact series
▪    ISO 6020-3-1994    液压传动 单杆缸安装尺寸,16 MPa(160 bar)系列 第3部分:缸内径250mm～500mm的小型系列    Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 3: Compact series with bores from 250 mm to 500 mm
▪    ISO 6022-2006    液压传动.25 MPa (250 bar)系列单杆缸的安装尺寸    Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
▪    ISO 6072-2002    液压传动.流体和标准合成橡胶材料间的兼容性    Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials
▪    ISO 6117-2005    道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度100℃)    Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.)
▪    ISO 6118-2006    道路车辆.使用非石油基制动液的液压制动促动缸的弹性皮碗和密封圈(最高工作温度70℃)    Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.)
▪    ISO 6120-1995    道路车辆.使用石油基液压液的液压制动系统制动软管总成    Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid
▪    ISO 6149-1-2006    用于液压流体传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第1部分:带锪孔沟槽中装有    Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal
▪    ISO 6149-2-2006    用于液压传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第2部分:重型(S系列)螺柱端头    Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
▪    ISO 6149-3-2006    用于液压传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第3部分:轻型(L系列)螺柱端头    Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
▪    ISO 6162-1 Technical Corrigendum 1-2004    液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第1部分:3.5MPa至35MPa(35巴至350巴)压力下    Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127; Technical Corrigendum 1
▪    ISO 6162-1-2002    液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第1部分:压力为3.5MPa至35MPa(35巴至350巴)    Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
▪    ISO 6162-2-2002    液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第2部分:压力为35MPa至40MPa(350巴至400巴)    Hydraulic fluid power - Flange connectors with split or one-piece flange champs and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
▪    ISO 6164-1994    液压传动.25MPa和40MPa(250 bar和400 bar)压力下使用的四螺栓整体方法兰    Hydraulic fluid power; four-srew, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
▪    ISO 6263-1997    液压传动 调速阀 安装面    Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
▪    ISO 6264-1998    液压传动 溢流阀 安装面    Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
▪    ISO 6403-1988    液压传动 控制流量及压力的阀 试验方法    Hydraulic fluid power; valves controlling flow and pressure; test methods
▪    ISO 6547-1981    液压传动 缸筒 装有支撑环的活塞密封沟槽 尺寸和公差    Hydraulic fluid power; Cylinders; Piston seal housings incorporating bearing rings; Dimensions and tolerances
▪    ISO 6597-2005    道路车辆.机动车用带有电子控制功能的液压制动系统.试验过程    Road vehicles - Hydraulic braking systems, including those with electronic control functions, for motor vehicles - Test procedures
▪    ISO 6605-2002    液压传动.软管及软管组件.试验方法    Hydraulic fluid power - Hoses and hose assemblies - Test methods
▪    ISO 6743-4-1999    润滑剂、工业润滑油和有关产品(L类) 分类 第4部分:H组(液压系统)    Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems)
▪    ISO 6772-1988    航空航天 流体系统 液压软管、导管和接头组件的冲击试验    Aerospace; fluid systems; impulse testing of hydraulic hose, tubing and fitting assemblies
▪    ISO 6802-2005    钢丝增强的橡胶和塑料软管及软管组件.弯曲液压脉冲试验    Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing
▪    ISO 6803-1994    橡胶或塑料软管和软管组件 无弯曲的液压脉冲试验    Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
▪    ISO 6805-1994    井下采矿用的橡胶软管和软管组件 采煤用钢丝增强液压型 规范    Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification
▪    ISO 7135-1993    土方机械 液压挖掘机 术语和商业规格    Earth-moving machinery; hydraulic excavators; terminology and commercial specifications
▪    ISO 7169-1998    航空航天 液压系统用24°锥度孔可拆卸管接头 一般规范    Aerospace - Separable tube fittings for fluid systems, 24 degrees cone - General specification
▪    ISO 7181-1991    液压传动 缸筒 活塞和活塞杆面积比    Hydraulic fluid power; cylinders; bore and rod area ratios
▪    ISO 7241-1-1987    液压传动 快换接头 第1部分:尺寸和要求    Hydraulic fluid power; Quick-action couplings; Part 1 : Dimensions and requirements
▪    ISO 7241-2-2000    液压传动 快换接头 第2部分:试验方法    Hydraulic fluid power - Quick-action couplings - Part 2: Test methods
▪    ISO 7257-1983    航空器 液压管接头和连接接头扭转弯曲试验    Aircraft; Hydraulic tubing joints and fittings; Rotary flexure test
▪    ISO 7308-1987    道路车辆 储能液压制动用的石油基制动液    Road vehicles; Petroleum-based brake-fluid for stored-energy hydraulic brakes
▪    ISO 7309-1985    道路车辆 液压制动系统 ISO标准石油基液    Road vehicles; Hydraulic braking systems; ISO reference petroleum base fluid
▪    ISO 7314-2002    航空航天.液压系统.金属软管组件    Aerospace - Fluid systems - Metal hose assemblies
▪    ISO 7315-1988    航空航天 液压系统安装用“P”形卡箍(环状卡箍) 包容尺寸    Aerospace; "P" clamps (loop clamps) for fluid systems; envelope dimensions
▪    ISO 7368-1989    液压传动 二油口盖板式插装阀 插装孔    Hydraulic fluid power; two-port slip-in cartridge valves; cavities
▪    ISO 7425-1-1988    液压传动 弹性体赋能塑料面密封沟槽 尺寸和公差 第1部分:活塞密封沟槽    Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 1: piston seal housings
▪    ISO 7425-2-1989    液压传动 弹性体赋能塑料面密封沟槽 尺寸和公差 第2部分:活塞杆密封沟槽    Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 2: rod seal housings
▪    ISO 7451 Technical Corrigendum 1-1998    土方机械 液压挖掘机铲斗和挖掘装载机铲斗的容量标定 技术勘误1    Earth-moving machinery - Volumetric ratings for hydraulic excavator buckets and backhoe loader buckets; Technical Corrigendum 1
▪    ISO 7451-1997    土方机械 液压挖掘机铲斗和挖掘装载机铲斗的容量标定    Earth-moving machinery - Volumetric ratings for hydraulic excavator buckets and backhoe loader buckets
▪    ISO 7630-1985    道路车辆 使用石油基液压制动液的鼓式制动轮缸的弹性O形密封圈(最高工作温度120℃)    Road vehicles; Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
▪    ISO 7631-1985    道路车辆 使用石油基液压制动液的液压制动系统液压缸的弹性皮碗和密封垫圈(最高工作温度120℃)    Road vehicles; Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
▪    ISO 7632-1985    道路车辆 使用石油基液压制动液的液压盘式制动液压缸的弹性密封垫圈(最高工作温度120℃)    Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
▪    ISO 7633-1985    道路车辆 使用石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度120℃)    Road vehicles; Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
▪    ISO 7635-2006    道路车辆.包括有电子控制功能的机动车辆在内的机动车辆用气压或气动/液压制动系统.试验规程    Road vehicles - Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions - Test procedures
▪    ISO 7745-1989    液压传动 难燃液压油 使用指南    Hydraulic fluid power; fire-resistant (FR) fluids; guidelines for use
▪    ISO 7789 Technical Corrigendum 1-1999    液压传动 二油口、三油口和四油口螺纹式插装阀 插装孔 技术勘误1    Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities; Technical Corrigendum 1
▪    ISO 7789-1998    液压传动 二油口、三油口和四油口螺纹式插装阀 插装孔    Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities
▪    ISO 7790-1997    液压传动 四油口叠加阀和四油口方向控制阀02、03和05规格 夹紧尺寸    Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions
▪    ISO 7902-1-1998    稳态条件下液压滑动轴承 圆柱形轴承 第1部分:计算程序    Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 1: Calculation procedure
▪    ISO 7902-2-1998    稳态条件下液压滑动轴承 圆柱形轴承 第2部分:计算程序用函数    Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure
▪    ISO 7902-3-1998    稳态条件下液压滑动轴承 圆柱形轴承 第3部分:可允许的运行参数值    Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters
▪    ISO 7986-1997    液压传动 密封装置 评定用于液压往复运动用途的密封件性能的标准试验方法    Hydraulic fluid power - Sealing devices - Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
▪    ISO 8032-1997    橡胶和塑料软管组件 液压脉冲弯曲试验(半Ω 型试验)    Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test)
▪    ISO 8131-1992    液压传动 单杆缸、16 MPa(160 bar)小型系列 公差    Hydraulic fluid power; single rod cylinders, 16 MPa (160 bar) compact series; tolerances
▪    ISO 8132-2006    液压传动.单杆缸、16 MPa (160 bar)中型系列和25 MPa (250 bar)系列.附件安装尺寸    Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessories
▪    ISO 8133-2006    液压传动.单杆缸、16 MPa(160 bar)小型系列.附件安装尺寸    Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Mounting dimensions for accessories
▪    ISO 8135-1999    液压传动 单杆缸、16 MPa(160 bar)中型系列和25 MPa(250 bar)系列 公差    Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Tolerances
▪    ISO 8278-1986    航空航天 液压式压力补偿变流量泵 一般要求    Aerospace; Hydraulic, pressure compensated, variable delivery pumps; General requirements
▪    ISO 8426-1988    液压传动 容积式泵和马达 空载排量的测定    Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity
▪    ISO 8574-2004    航空航天.液压系统管路安装.弯管的合格试验    Aerospace - Hydraulic system tubing - Qualification tests for bent tubes
▪    ISO 8575-1990    航空航天 流体系统 液压系统管路安装    Aerospace; fluid systems; hydraulic system tubing
▪    ISO 8626-1989    液压伺服振动试验设备 特性描述方法    Servo-hydraulic test equipment for generating vibration; method of describing characteristics
▪    ISO 8643-1997    土方机械 液压挖掘机和挖掘装载机动臂下降控制装置 要求和试验    Earth-moving machinery - Hydraulic excavator and backhoe loader boom-lowering control device - Requirements and tests
▪    ISO 9080-2003    塑料管道和导管系统.用外推法测定热塑性塑料管材的长期静液压强度    Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
▪    ISO 9110-1-1990    液压传动 测量技术 第1部分:通用测量准则    Hydraulic fluid power; measurement techniques; part 1: general measurement principles
▪    ISO 9110-2-1990    液压传动 测量技术 第2部分:密闭回路中平均稳定压力的测量    Hydraulic fluid power; measurement techniques; part 2: measurement of average steady-state pressure in a closed conduit
▪    ISO 9206-1990    航空航天 恒流量液压马达 一般规范    Aerospace; constant displacement hydraulic motors; general specifications
▪    ISO 9302-1994    压力用途的无缝钢管和焊接(埋弧焊除外)钢管 液压密封验证电磁试验法    Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness
▪    ISO 9461-1992    液压传动 阀的油口、底板、控制装置和电磁铁的标准    Hydraulic fluid power; identification of valve ports, subplates, control devices and solenoids
▪    ISO 9538-1996    航空航天 液压管路安装接头及管接头 平面弯曲试验    Aerospace - Hydraulic tubing joints and fittings - Planar flexure test
▪    ISO 9615-1989    木工机械 带有液压夹紧装置的木丝用立式切碎机 术语 两种语言版    Woodworking machines; vertical shredding machines for wood wool production, with hydraulic clamping; nomenclature
▪    ISO 9635-1990    灌溉设备 液压操纵灌溉阀    Irrigation equipment; hydraulically operated irrigation valves
▪    ISO 9906-1999    回转动力泵 液压性能验收试验 等级1和2    Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2
▪    ISO 9974-1-1996    通用和液压传动用联接件 带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头 第1部分:螺纹气门    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports
▪    ISO 9974-2-1996    通用和液压传动用联接件 带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头 第2部分:弹性密封的双头螺    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E)
▪    ISO 9974-3-1996    通用和液压传动用联接件 带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头 第3部分:金属-金属密封的    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B)
▪    ISO 9974-4-2006    通用和液压传动用联接件.带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头.第4部分:内外六角气门栓的    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
▪    ISO/OECD 789-10-2006    农业拖拉机.试验程序.第10部分:拖拉机与农具连接界面液压功率    Agricultural tractors - Test procedures - Part 10: Hydraulic power at tractor/implement interface
▪    ISO/TR 10949-2002    液压传动.元件清洁度.从生产到安装的过程中元件清洁度的取得和控制指南    Hydraulic fluid power - Component cleanliness - Guidelines for achieving and controlling cleanliness of components from manufacture to installation
▪    ISO/TR 11071-2-2006    世界范围电梯安全标准比较.第2部分:液压电梯    Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators)
▪    ISO/TR 11340-1994    橡胶和橡胶制品 液压软管装置 液压系统的外部泄漏分类    Rubber and rubber products - Hydraulic hose assemblies - External leakage classification for hydraulic systems
▪    ISO/TR 16144-2002    液压传动.液体自动粒子计数器的校准.证实标准参考物质(SRM 2806)的规程    Hydraulic fluid power - Calibration of liquid automatic particle counters - Procedures used to certify the standard reference material SRM 2806
▪    ISO/TR 8059-1986    灌溉设备 自动灌溉系统 液压控制    Irrigation equipment; Automatic irrigation systems; Hydraulic control
▪    ISO/TR 9080 Technical Corrigendum 1-1995    流体输送用热塑性塑料管材 用静液压破坏应力数据测定热塑性塑料管材材料长期静液压强度的外推方法 技术勘误    Thermoplastics pipes for the transport of fluids - Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials - Technical Corrigendum 1
▪    ISO/TS 13725-2001    液压传动 缸筒 压曲临界负荷测定方法    Hydraulic fluid power - Cylinders - Method for determining the buckling load
▪    ISO/TS 16431-2002    液压传动.配件系统.清洁度的鉴定    Hydraulic fluid power - Assembled systems - Verification of cleanliness
▪    ISO/TS 17104-2006    螺纹紧固件的旋转刀具.液压推动工具.性能试验方法    Rotary tool for threaded fasteners - Hydraulic impulse tools - Performance test method

▪    DIN 11751-1989    农用拖拉机和机械.拖挂车用液压筒(200巴).连接尺寸    Agricultural tractors and machinery; hydraulic cylinders for trailers; connecting dimensions
▪    DIN 14751-4-2002    消防队用液压操作救援器械.第4部分: 带综合泵和/或电源的双重作用的液压式救援器械    Hydraulically operated rescue apparatus for fire brigade use - Part 4: Double acting hydraulic rescue tools with integrated pump and/or power source
▪    DIN 14751-5-2004    消防队用液压救生工具.第5部分:单作用力液压救生工具    Hydraulically operated rescue tools for fire brigade use - Part 5: Single acting hydraulic rescue tools
▪    DIN 14800-6-2004    消防车和救援服务车用消防技术装备.第6部分:带单作用力液压臂的液压起重设备    Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 6: Hydraulic lifting equipment with single acting hydraulic rams
▪    DIN 15430-1989    动力传动设备.电动液压的升降设备.尺寸和技术要求    Power transmission engineering; electrohydraulic lifting appliances; dimensions and technical requirements
▪    DIN 18157-1-1979    采用稀灰浆垫料工艺制作陶瓷衬里.第1部分:液压灰浆    Execution of ceramic linings by thin mortar bed technique; hydraulic mortar
▪    DIN 18506-2002    液压道路粘结剂.组分、规范和符合性准则    Hydraulic road binders - Composition, specifications and conformity criteria
▪    DIN 19682-8-1972    农业工程用土壤探查方法.第8部分:野外试验.采用螺旋钻孔法对液压渗透性的测定    Methods of soil investigations for agricultural engineering; field tests, determination of the hydraulic conductivity by auger hole method
▪    DIN 19683-9-1998    农业工程中土壤调查研究方法.物理实验室试验.第9部分.圆柱形钻芯－刀具的饱和液压水导电性的测定    Methods of soil investigations for agricultural engineering - Physical laboratory tests - Part 9: Determination of the saturated hydraulic water conductivity in the cylindrical core-cutter
▪    DIN 19704-1-1998    钢制液压结构件.第1部分:设计和计算准则    Hydraulic steel structures - Part 1: Criteria for design and calculation
▪    DIN 19704-2-1998    钢制液压结构件.第2部分:设计和制造    Hydraulic steel structures - Part 2: Design and manufacturing
▪    DIN 19704-3-1998    钢制液压结构件.第3部分:电气设备    Hydraulic steel structures - Part 3: Electrical equipment
▪    DIN 20021-1997    液压系统.带衬里的软管.DIN EN 853至DIN EN 857的补充件    Fluid-systems - Hoses with layer - Completation for DIN EN 853 to DIN EN 857
▪    DIN 20043-2003    液压传动循环管路用U形锁扣连接件    Staple-lock couplings for hydraulic power-transmission circuits
▪    DIN 20044-2003    液压动力传输管路用S型钩环锁定联接器.尺寸、要求和试验    Staple-lock couplings type S for hydraulic power-transmission circuits - Dimensions, requirements, testing
▪    DIN 24080-1979    运土机械.液压式缆索传动挖土机.挖土机:术语    Earth-moving Machinery; Hydraulic Excavators Cable-operated, Excavators; Terms
▪    DIN 24087-1979    土方机械.液压挖土机的可靠性测定.安全要求    Earth Moving Machinery; Determination of Stability of Hydraulic Excavators Safety Requirements
▪    DIN 24311-1992    液压流体动力.比例控制阀和伺服阀.定义、符号和单位    Hydraulic fluid power; proportional and servo valves; definitions, symbols, units
▪    DIN 24312-1985    液压系统和元件.压力、量值、术语    Fluid power systems and components; pressure; quantities, terms
▪    DIN 24320-1986    耐燃液压油.HFAE级.性能和要求    Fire resistant fluids; group HFAE, characteristics, requirements
▪    DIN 24331-1972    液压流体力学.液压泵和液压马达、几何排量-容量、流量    Oilhydraulic; hydraulic pumps and hydraulic engines, geometrical displacement-volume, rates
▪    DIN 24333-1979    液压.250巴液压缸.安装尺寸    Fluidpower; hydraulic cylinder 250 bar, mounting dimensions
▪    DIN 24336-1980    流体动力.100巴液压缸.安装尺寸    Fluidpower; hydraulic cylinder 100 bar, mounting dimensions
▪    DIN 24337-2001    液压动力.旋转头.尺寸、要求    Fluid power - Rod end plain eyes - Dimensions, requirements
▪    DIN 24338-2001    液压动力.宽铰节轴承铰节头.尺寸、要求    Fluid power - Rod end spherical eyes - Dimensions, requirements
▪    DIN 24339-1993    流体动力.钢制液压容器.尺寸、要求和试验方法.公称容量63至1250    Fluid power; hydraulic reservoirs made of steel; dimensions, requirements, test methods; nominal capacity 63 to 1250
▪    DIN 24340-2-1982    液压阀.换向阀用安装面和连接板    Hydraulic valves; mounting surfaces and connecting plates for directional control valves
▪    DIN 24343-1982    液压传动系统和元件.液压设备的维护及检查细目表    Hydraulic fluid power systems and components; list for attendance and inspection of hydraulic equipments
▪    DIN 24346-1984    液压传动.液压系统.应用的一般规则    Hydraulic fluid power - hydraulic systems; general rules for application
▪    DIN 24550-3-1992    流体动力:管线内过滤器用液压过滤器元件.包洛面尺寸    Fluid power; hydraulic filter elements for inline filters; envelope dimensions
▪    DIN 24550-4-1992    流体动力:罐顶回油过滤用液压过滤器元件.包洛面尺寸    Fluid power; hydraulic filter elements for tank top return-line filters; envelope dimensions
▪    DIN 24550-5-1992    流体动力:液压过滤器:悬挂式回油过滤器安装尺寸    Fluid power; hydraulic filters; tank top return-line filter fitting dimensions
▪    DIN 24550-6-1999    流体动力.液压过滤器.第6部分:检验过滤器外壳.尺寸    Fluid power - Hydraulic filters - Part 6: Test filter housings; dimensions
▪    DIN 24550-8-1999    流体动力.液压过滤器.第8部分:离心式过滤器.过滤器和连接尺寸    Fluid power - Hydraulic filters - Part 8: Spin-on filters; filter and connection dimensions
▪    DIN 24552-1990    液压流体动力.液压系统的液压蓄能器.概念和一般要求    Hydraulic fluid power; accumulators in hydraulic systems; concepts, general requirements
▪    DIN 24554-1990    流体动力.160巴紧密式液压缸.安装尺寸    Fluidpower; hydraulic cylinder 160 bar compact; mounting dimensions
▪    DIN 24564-1-1995    液压系统和元件.第1部分:特性    Fluid power systems and components - Part 1: Characteristics
▪    DIN 24564-2-2003    液压系统和元件.液压系统用元件.第2部分:液压缸用电位置传感器的特性    Fluid power systems and components - Components for hydraulic sytems - Part 2: Characteristics of electrical position transducers for hydraulic cylinders
▪    DIN 24567-1998    液压.圆形蓄压钢瓶.尺寸、要求、试验方法.额定容积1000-20000    Fluid power - Round hydraulic reservoirs made of steel - Dimensions, requirements, test method - Nominal capacity 1000 to 20000
▪    DIN 24950-1-1978    第1部分:液压和气动软管组件术语    Oilhydraulic and pneumatic; terms for hose assemblies
▪    DIN 2781-1990    机床.液压机的45°单头锯齿螺纹    Machine tools; buttress thread 45°, single start, for hydraulic presses
▪    DIN 30732-1-1987    都市车辆用液压系统.第1部分:设有两套系统的冬用车辆    Hydraulic systems for municipal vehicles; winter service vehicles with 2 hydraulic systems
▪    DIN 31653-1-1991    滑动轴承.稳定工作条件下液压滑动止推轴承.垫片止推轴承计算    Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; calculation of pad thrust bearings
▪    DIN 31653-2-1991    滑动轴承.稳定工作条件下液压滑动止推轴承.垫片止推轴承计算函数    Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; functions for calculation of pad thrust bearings
▪    DIN 31653-3-1991    滑动轴承.稳定工作条件液压滑动止推轴承.垫片止推轴承计算用允许运算参数    Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; permissible operational parameters for calculation of pad thrust bearings
▪    DIN 31657-1-1996    滑动轴承.稳定工作状态液压径向滑动轴承.第1部分:多层轴承和斜垫止推滑动轴承计算    Plain bearings - Hydrodynamic plain journal bearings under steadystate conditions - Part 1: Calculation of multi-lobed and tilting pad journal bearings
▪    DIN 31657-2-1996    滑动轴承.稳定工作状态液压径向滑动轴承.第2部分:多层滑动轴承计算函数    Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 2: Functions for calculation of multilobed journal bearings
▪    DIN 31657-3-1996    滑动轴承.稳定工作状态液压径向滑动轴承.第3部分:斜垫止推滑动轴承计算用函数    Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 3: Functions for calculation of tilting pad journal bearings
▪    DIN 3771-4-1984    液压系统.Ｏ型密封圈.质量验收准则    Fluid systems; O-rings; quality acceptance criteria
▪    DIN 3771-5-1993    液压系统.O型圈.计算方法和安装空间尺寸    Fluid systems; O-rings; methods for calculation and dimensions of housings
▪    DIN 45635-26-1979    机器空气噪声的测量.包络面法.液压泵    Measurement of airborne noise emitted by machines; enveloping surface method, hydraulic pumps
▪    DIN 45635-41 Bb.1-1986    机器排放的噪声测量.空气传播的噪声.第41 Bb.1部分:包洛面法.液压组件(试验报告样表)    Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies (test report specimen form)
▪    DIN 45635-41-1986    机器排放的噪声测量.空气传播的噪声.第41部分:包洛面法.液压组件    Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies
▪    DIN 48083-3-1985    压力连接件用压力机模具.标称压力为300、450 和1000KN以下的液压机.尺寸    Dies for presses for pressure connections; hydraulical presses with a nominal compressive force up to 300, up to 450 and up to 1000 kN connecting; dimensions
▪    DIN 51308-2005    建筑中应用和测量力用辅助装置的验证.夹紧装置、液压缸、夹紧工具用功率计    Verification of auxiliary devices for application and measuring of forces in building - clamp-devices, hydraulic cylinders, dynamometer for clamp aim
▪    DIN 51345-1986    耐火液压液体和金属的相容性试验    Testing the compatibility of fire-resistant hydraulic fluids with metals
▪    DIN 51389-1-1982    润滑剂的测定.叶片泵液压流体的机械检验.第1部分:一般工作原则    Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; general working principles
▪    DIN 51389-2-1982    润滑剂的测定.叶片泵液压流体的机械检验.第2部分:无水液压流体的 A 方法    Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; method A foranhydrous hydraulic fluids
▪    DIN 51389-3-1998    润滑剂的检测.叶轮泵中液压流体的机械试验.第3部分:含水不易燃液压流体的B试验方法    Determination of lubricants - Mechanical testing of hydraulic fluids in the vane-cell-pump - Part 3: Method B for aqueous not easily inflammable hydraulic fluids
▪    DIN 51524-1-2006    压力液体.液压油.第1部分:HL液压油.最低要求    Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils; Minimum requirements
▪    DIN 51524-2-2006    压力液体.液压油.第2部分:HLP液压油.最低要求    Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements
▪    DIN 51524-3-2006    压力液体.液压油.第3部分:HLP液压油.最低要求    Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils; Minimum requirements
▪    DIN 53769-2-1986    玻璃纤维增加塑料管道检验.长期静液压试验    Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test
▪    DIN 55189-2-1988    机床.静态负荷下板金加工冲压参数的测定.第2部分:液压机    Machine tools; determination of the ratings of presses for sheet metal working under static load; hydraulic presses
▪    DIN 65385-1991    航空航天.液压流体动力..过滤器元件.试验数据报告    Aerospace; hydraulic fluid power; filter elements; reporting of test data
▪    DIN 74000-1992    液压制动装置.双回路制动装置.制动回路图的符号    Hydraulic braking systems; dual circuit brake systems; symbols for brake circuits diagrams
▪    DIN 74075-1-1997    载重汽车和鞍式牵引机构液压联轴器.第1部分:液压联轴器要求    Hydraulic couplings on lorries and semi-trailer towing vehicles - Part 1: Location of hydraulic couplings
▪    DIN 74200-1991    液压制动系统.液压缸.尺寸和安装说明    Hydraulic braking systems; cylinders; dimensions, instructions for installation
▪    DIN 74225-1991    液压制动软管组件.制动用软管接头.制动软管夹    Brake hose assemblies; brake hose fittings; brake hose clips
▪    DIN 74233-1-1991    液压制动系统.制动管道配件.第1部分:制动管道外用配件    Hydraulic braking systems; fittings for brake pipes; male fittings for brake pipes
▪    DIN 74233-2-1991    液压制动系统.制动管道配件.第2部分:制动管道管接螺母    Hydraulic braking systems; fittings for brake pipes; union nuts for brake pipes
▪    DIN 74234-1992    液压制动系统.扩口的制动液压管    Hydraulic braking systems; brake pipes, flares
▪    DIN 74235-1991    液压制动系统.螺纹孔    Hydraulic braking systems; tapped holes
▪    DIN 8584-7-2003    在拉伸和加压复合条件下复合成形的制造工艺.第7部分:液压成形加宽.分类、细类、术语和定义    Manufacturing processes forming under combination of tensile and compressive conditions - Part 7: Hydroforming widening; Classification, subdivision, terms and definitions
▪    DIN EN 10246-2-2000    钢管的无损检验.第2部分:证明液压渗漏密封性的无缝和焊接(埋弧焊接除外)的奥氏体和铁素体/奥氏体钢管的自动    Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-2:2000
▪    DIN EN 10275-1999    金属材料.管环液压压力试验    Metallic materials - Tube ring hydraulic pressure test; German version EN 10275:1999
▪    DIN EN 10305-4-2003    精密装置用钢管.交货技术条件.第4部分:液压和气动系统用无缝冷拉管    Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-4:2003
▪    DIN EN 10305-6-2005    精密仪器用钢管.交货技术条件.第6部分:液压和气动动力系统用焊接冷拉管材    Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-6:2005
▪    DIN EN 12107-1997    塑料管道系统.注塑热塑性塑料配件、阀门和附件.注塑热塑材料管件持久静液压强度的测定    Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components; German version EN 12107:1997
▪    DIN EN 12162-2001    液体泵.安全要求.静液压试验过程    Liquid pumps - Safety requirements - Procedure for hydrostatic testing; German version EN 12162:2001
▪    DIN EN 12312-19-2005    飞行器地面支持设备.特殊要求.第19部分:飞行器架、轴架和液压尾翼支柱    Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions; German version EN 12312-19:2005
▪    DIN EN 12332-2-2003    橡胶或塑料涂层织物.破裂强度测定.第2部分:液压法    Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method; German version EN 12332-2:2002
▪    DIN EN 12622-2001    机床.机床安全性.液压制动器    Machine tools - Safety of machine tools - Hydraulic press brakes; German version EN 12622:2001
▪    DIN EN 12706-1999    胶粘剂.液压固化地板镘光和/或整平化合物的试验方法.流动性的测定    Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics; German version EN 12706:1999
▪    DIN EN 12952-14-2004    水管锅炉和辅助设备.第14部分:使用液压氨和氨水溶液的废气DENOX系统的要求    Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution; German version EN 12952-14:2004
▪    DIN EN 13204-2005    消防和救生服务用双动液压救生工具.安全和性能要求    Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements; German version EN 13204:2004
▪    DIN EN 13242-2003    土木工程和道路建筑用非结合和液压结合材料用集料    Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction; German version EN 13242:2002
▪    DIN EN 13408-2002    液压固化地板平整复合物试验方法.粘附拉伸强度测定    Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength; German version EN 13408:2002
▪    DIN EN 13409-2002    液压固化地板平整复合物的试验方法.固化时间测定; 德文版本 EN 13409:2002    Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time; German version EN 13409:2002
▪    DIN EN 13433-2006    防饮用水回流污染设备.液压驱动机械分离器.族G,A型    Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A; German version EN 13433:2006
▪    DIN EN 13434-2006    防饮用水回流污染设备.液压驱动机械分离器.族G,B型    Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B; German version EN 13434:2006
▪    DIN EN 13802-2005    铁路设施.悬挂部件.液压减震器    Railway applications - Suspension components - Hydraulic dampers; German version EN 13802:2004
▪    DIN EN 13851-2004    液压楼层校平和/或水平层复合物的试验方法.抗弯曲及抗压强度的测定    Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of flexural and compressive strength; German version EN 13851:2003
▪    DIN EN 1397-1999    热交换器.液压间风扇线圈装置.性能确定的试验方法    Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance; German version EN 1397:1999
▪    DIN EN 14227-13-2006    液力粘结混合料.规范.第13部分:液压道路粘结剂处理的土壤    Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder; German version EN 14227-13:2006
▪    DIN EN 14653-1-2005    土方工程支撑用手动液压支撑系统.第1部分:产品规范    Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications; German version EN 14653-1:2005
▪    DIN EN 14653-2-2005    土方工程支撑用手动液压支撑系统.第2部分:通过计算或试验评定    Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test; German version EN 14653-2:2005
▪    DIN EN 1487-2000    建筑物阀门.液压安全类.试验和要求    Building valves - Hydaulic safety groups - Tests and requirements; German version EN 1487:2000
▪    DIN EN 1777-2005    消防和救援设备用液压平台.安全要求和检验    Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing; German version EN 1777:2004
▪    DIN EN 1804-1-2003    地下采矿机械.液压护顶支撑物安全性要求.第1部分:支撑装置和一般要求    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements; German version EN 1804-1:2001
▪    DIN EN 1804-2-2003    地下采矿机械.液压顶棚支撑安全性要求.第2部分:动力装置的支柱和作动筒    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams; German version EN 1804-2:2001
▪    DIN EN 1804-3-2006    地下采矿机械.液压顶棚支撑安全性要求.第3部分:液压控制系统    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems; German version EN 1804-3:2006
▪    DIN EN 1937-1999    胶粘剂.液压固化地板镘光和/或整平化合物的检验方法.标准混合法    Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures; German version EN 1937:1999
▪    DIN EN 2622-2003    航空航天系列.直径为3.2mm D 100mm的耐热合金液压圆形管.尺寸    Aerospace series - Circular tubes, for fluids in heat resisting alloys, diameter 3,2 mmD100 mm - Dimensions; German and English version EN 2622:2001
▪    DIN EN 26802-1993    金属丝增强的橡胶和塑料软管组件.挠曲状态下液压脉冲试验    Rubber and plastics hose and hose assemblies with wire reinforcements; hydraulic impulse test with flexing (ISO 6802:1991); german version EN 26802:1993
▪    DIN EN 474-5-1996    土方机械.安全性.第5部分:液压挖掘机要求    Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators; German version EN 474-5:1996
▪    DIN EN 50340-2002    液压电缆切割装置.标称电压为交流30kV以下的电气设备用装置    Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV; German version EN 50340:2001
▪    DIN EN 62237-2005    带电作业.液压工具和设备用带配件的绝缘软管    Live working - Insulating hoses with fittings for use with hydraulic tools and equipment (IEC 62237:2003, modified); German version EN 62237:2005
▪    DIN EN 752-4-1997    建筑物外部排水系统.第4部分:液压设计和对环境的考虑    Drain and sewer systems outside buildings - Part 4: Hydraulic design and environmental considerations; German version EN 752-4:1997
▪    DIN EN 773-1999    液压排水管道构件一般要求    General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers; German version EN 733:1999
▪    DIN EN 81-2-2000    升降机建造和安装的安全规则.第2部分:液压升降机    Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts (includes corrigendum AC:1999); German version EN 81-2:1998 + AC:1999
▪    DIN EN 81-2/A1-2006    电梯建造和安装的安全规则.第2部分:液压升降机.德文版本EN 81-2:1998/A1-2005    Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts; German version EN 81-2:1998/A1:2005
▪    DIN EN 81-2/A2-2005    升降机施工和安装的安全规则.第2部分:液压升降机.A2:机械和滑轮间隔    Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts - A2: Machinery and pulley spaces; German version EN 81-2:1998/A2:2004
▪    DIN EN 81-3-2001    升降机制造和安装安全规则.第3部分:电动升降机和液压升降机    Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts; German version EN 81-3:2000
▪    DIN EN 853-1997    橡胶软管和软管组件.带金属丝编织层的液压软管.规范    Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification; German version EN 853:1996
▪    DIN EN 854-1997    橡胶软管和软管组件.带织物编织层的液压软管.规范    Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification; German version EN 854:1996
▪    DIN EN 855-1997    塑料软管和软管组件.带织物编织层的塑料液压软管.规范    Plastic hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification; German version EN 855:1996
▪    DIN EN 856-1997    橡胶软管和软管组件.带金属丝螺旋垫层的液压软管.规范    Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification; German version EN 856:1996
▪    DIN EN 857-1997    橡胶软管和软管组件.带金属丝编织层的紧凑型液压软管.规范    Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification; German version EN 857:1996
▪    DIN EN 911-1995    塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头的连接.外部静力液压条件下的防漏试验方法;    Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure; German version EN 911:1995
▪    DIN EN 982-1996    机械安全性.液压系统 及其部件的安全要求.液压装置    Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics; German version EN 982:1996
▪    DIN EN 983-1996    机械安全性.液压系统及其部件的安全要求.气动装置    Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics; German version EN 983:1996
▪    DIN EN ISO 10592-1995    小型船舶.液压操纵系统 (ISO 10592:1994); 德文版本 EN ISO 10592:1995    Small craft - Hydraulic steering systems (ISO 10592:1994); German version EN ISO 10592:1995
▪    DIN EN ISO 12922-2002    润滑剂、工业用油和相关产品(L级).H类(液压体系).HFAE、 HFAS、HFB、HFC、HFDR和HFDU的目录规范 (ISO 12922    Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001); German version EN ISO 12922:2002
▪    DIN EN ISO 13938-1-1999    纺织品.织物破裂特性.第1部分:胀破强度和胀破力测定的液压方法    Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999); German version EN ISO 13938-1:1999
▪    DIN EN ISO 1402-1996    橡胶和塑料软管及软管组件.液压静力试验    Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994); German version EN ISO 1402:1996
▪    DIN EN ISO 19879-2005    液压传动和通用金属管连接.液压传动连接的试验方法    Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2005); German version EN ISO 19879:2005
▪    DIN EN ISO 20763-2004    石油和相关产品.液压液耐磨性能的测定.叶片泵法    Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004); German version EN ISO 20763:2004
▪    DIN EN ISO 4263-2-2003    石油及相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第2部分:HFC类液压液测定规程    Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for class HFC hydraulic fluids (ISO 4263-2:2003); German version EN ISO 4263-2:2003
▪    DIN EN ISO 4404-2-2003    石油和相关产品.难燃液压液抗腐蚀性的测定.第2部分:不含水液体    Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003); German version EN ISO 4404-2:2003
▪    DIN EN ISO 5198-1999    离心泵、混流泵和轴流泵.液压性能试验规范.精密级    Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987); German version EN ISO 5198:1998
▪    DIN EN ISO 6743-4-2002    润滑剂、工业用润滑油和相关产品(L类).分类.第4部分:H族(液压系统)    Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999); German version EN ISO 6743-4:2001
▪    DIN EN ISO 6803-1997    橡胶和塑料软管及软管组件.无弯曲液压压力脉冲试验    Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997
▪    DIN EN ISO 8032-1999    橡胶和塑料软管组件.结合液压脉冲试验的软管弯曲试验(半Ω 型弯曲试验)    Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999
▪    DIN EN ISO 8434-1-1997    液压传动和通用连接件.第1部分:24度喇叭形压合接头    Metallic tube connections for fluid power and general use - Part 1: 24° compression fittings (ISO 8434-1:1994); German version EN ISO 8434-1:1997
▪    DIN EN ISO 8434-4-2000    液压及通用金属管件连接.第4部分:接头焊有O形密封圈的24度锥体连接件    Metallic tube connections for fluid power and general use - Part 4: 24° cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000
▪    DIN EN ISO 9080-2003    塑料管道和导管系统.用外推法测定热塑性塑料管材的长期静液压强度    Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003); German version EN ISO 9080:2003
▪    DIN EN ISO 9906-2002    旋转式动力泵.液压性能验收试验.等级1和2 (ISO 9906:1999); 德文版本 EN ISO 9906:1999    Rotodynamic pumps - Hydraulic performance acceptance test - Grades 1 and 2 (ISO 9906:1999); German version EN ISO 9906:1999
▪    DIN EN ISO 9974-2-2000    通用和液压传动用联接件.用ISO261弹性螺纹或金属与金属密封的气门和双头螺栓端头.第2部分:(E型)带弹性密封    Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996); German version EN ISO 9974-2:2000
▪    DIN ISO 10448-1999    农用拖拉机.机具的液压系统    Agricultural tractors - Hydraulic pressure for implements (ISO 10448:1994)
▪    DIN ISO 10627-2-1999    农用机械和拖拉机.农作物液压喷灌设备.第2部分:部件数据单    Agricultural machinery and tractors - Hydraulic agricultural sprayers - Part 2: Data sheets for components (ISO 10627-2:1992)
▪    DIN ISO 10763-2004    液压传动.端面平齐的无缝和焊接型精密钢管.尺寸和标称工作压力    Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures (ISO 10763:1994)
▪    DIN ISO 10766-1998    液压流体动力液压缸.活塞和连杆的矩形截面轴承环的壳体尺寸    Hydraulic fluid power, cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods (ISO 10766:1996)
▪    DIN ISO 11217-1994    航空航天.液压系列流体污染物.取样点定位和取样准则    Aerospace; hydraulic system fluid contamination; location of sampling points and criteria for sampling; identical with ISO 11217:1993
▪    DIN ISO 11218-1994    航空航天.液压流液污染度的分类    Aerospace; cleanlinless classification for hydraulic fluids; identical with ISO 11218:1993
▪    DIN ISO 11471-1997    农用拖拉机和机具.遥控液压装置和控制装置编码    Agricultural tractors and machinery - Coding of remote hydraulic power services and controls (ISO 11471:1995)
▪    DIN ISO 12151-2-2004    液压传动和通用连接件.软管接头.第2部分:带ISO 8434-1和8434-4 24°锥形连接件末端和O形圈的软管接头    Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)
▪    DIN ISO 12151-3-2004    液压传动和通用连接件.软管接头.第3部分:带ISO 6162法兰末端的软管接头    Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends (ISO 12151-3:1999)
▪    DIN ISO 1219-1-1996    液压传动系统和部件.图形符号和线路图.第1部分:图形符号    Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols (ISO 1219-1:1991)
▪    DIN ISO 1219-2-1996    液压动力系统和部件.图形符号和线路图.第2部分:线路图    Fluid power systems and components - Graphic symbols and circuit diagrams - Part 2: Circuit diagrams (ISO 1219-2:1995)
▪    DIN ISO 12238-2005    液压传动.方向控制阀门.移动时间测量(ISO 12238-2001)    Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001)
▪    DIN ISO 15171-1-2004    流体传动和一般用途管接头.诊断用液压管接头.第1部分:非压力下连接的管接头    Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999)
▪    DIN ISO 15171-2-2004    流体传动和一般用途管接头.诊断用液压管接头.第2部分:带M12 2螺纹端的压力连接接头    Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Couplings with M 16 × 2 end for connection under pressure (ISO 15171-2:2000)
▪    DIN ISO 15380-2004    润滑油、工业用油和相关产品(L级).H族(液压系统).HETG、HEPG、HEES和HEPR类规范说明    Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR (ISO 15380:2002)
▪    DIN ISO 21287-2005    液压传动.储气瓶.1000 kPa (10 bar) 系列、 20 mm到 100 mm 内径的小型气瓶(ISO 21287-2004)    Pneumatic fluid power - Cylinders - Compact cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm (ISO 21287:2004)
▪    DIN ISO 2941-1983    液压传动.滤芯.抗破裂性/爆破性检验    Hydraulic fluid power; filter elements; verification of collapse/burst resistance
▪    DIN ISO 3019-1-2004    液压传动.容积泵和马达的安装法兰和轴伸的尺寸及标注代号.第1部分:用米制单位表示的英制系列    Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units (ISO 3019-1:2001)
▪    DIN ISO 3019-2-2004    液压传动.容积式泵和马达的安装法兰和轴伸的尺寸及标注代号.第2部分:米制系列    Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series (ISO 3019-2:2001)
▪    DIN ISO 3320-2001    液压系统和元件.缸径和活塞杆直径.米制系列    Fluid power systems and components - Cylinder bores and piston rod diameter - Metric series (ISO 3320:1987)
▪    DIN ISO 3322-2001    液压系统和元件.作动筒.公称压力    Fluid power systems and components - Cylinders - Nominal pressures (ISO 3322:1985)
▪    DIN ISO 3323-1985    航空器..液压元件.表明液压元件已被批准适用油液的标志    Aircraft; hydraulic components; marking to indicate fluid for which component is approved
▪    DIN ISO 3724-1990    液压流体动力.滤芯.流动疲劳特性的验证    Hydraulic fluid power; filter elements; verification of flow fatigue characteristics; identical with ISO 3724:1976
▪    DIN ISO 3803-1990    道路车辆.制动设备的液压试验连接件    Road vehicles hydraulic pressure test connection for braking equipment; identical with ISO 3803:1984
▪    DIN ISO 4391-1984    液压传动.泵、电动机和整体式传动装置.参数定义和字母符号    Hydraulic fluid power; pumps, motors and integral transmissions; parameter definitions and letter symbols
▪    DIN ISO 4393-1984    液压传动系统和元件.缸.活塞行程的基本系列    Fluid power systems and components; cylinders; basic series of piston strokes
▪    DIN ISO 4395-1985    液压传动系统和元件.汽缸.活塞杆螺纹尺寸和型式.等同采用ISO 4395-1985版本    Fluid power systems and components; cylinders; piston rod thread dimensions and types; identical with ISO 4395, edition 1978
▪    DIN ISO 4409-1994    液压里动力.正排量泵、电动机和整体传动装置.静态稳定性的测定    Hydraulic fluid power; positive displacement pumps, motors and integral transmissions; determination of steady-state performance; identical with ISO 4409:1986
▪    DIN ISO 4548-5-1993    内燃机.全流式机油滤清器的试验方法.冷起动模拟和液压脉冲耐久性试验    Internal combustion engines; methods of test for full-flow lubricating oil filters; cold start simulation and hydraulic pulse durability test; identical with ISO 4548-5:1990
▪    DIN ISO 4926-1979    道路车辆.液压制动系统.非石油基基准液    Road Vehicles; Hydraulic Brake Systems, Non-petroleum Base Reference Fluids
▪    DIN ISO 4928-1982    道路车辆.使用非石油基液压制动液的液压制动系统缸体的弹性罩和密封件(最大工作温度120℃)    Road vehicles; elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.)
▪    DIN ISO 5597-1988    液压流体动力.液压缸.往复作用的活塞和活塞杆的密封腔.尺寸和公差    Hydraulic fluid power; cylinders; housings for piston and rod seals in reciprocating applications; dimensions and tolerances; identical with ISO 5597:1987
▪    DIN ISO 5884-1989    航空航天.流体系统和部件.液压流体中固体微粒污染的系统取样和测量方法    Aerospace; fluid systems and components; methods for system sampling and measuring the solid particle contamination of hydraulic fluids; identical with ISO 5884:1987
▪    DIN ISO 6020-1-2001    液压.16MPa(160 bar)系列单杆作动筒装配尺寸.第1部分:中型系列    Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPA (160 bar) series - Part 1: Medium series (ISO 6020-1:1998)
▪    DIN ISO 6149-1-1996    液压传动连接和普通连接.油口和带ISO 261螺纹和O型环密封的螺柱端头.第1部分:载头壳体内带O形环的油口    Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing (ISO 6149-1:1993)
▪    DIN ISO 6149-3-1996    液压传动连接和普通连接.油口和带ISO 261螺纹和O型环密封的螺柱端头.第3部分:轻载(L系列)螺柱端头.尺寸、设    Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 3: Light duty (L series) stud ends; dimensions, design, test methods and requirements (ISO 6149-3:1993)
▪    DIN ISO 6162-1-2006    液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第1部分:压力为3.5MPa至35MPa(35巴至350巴)    Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002 + Cor. 1:2004)
▪    DIN ISO 6162-2-2006    液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第2部分:压力为35MPa至40MPa(350巴至400巴)    Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002)
▪    DIN ISO 6195-1989    流体动力系统和组件.液压筒.往复作动用的刮垢环外罩.尺寸和公差    Fluid power systems and components; cylinders; housings for rod wiper rings in reciprocating applications; dimensions and tolerances; identical with ISO 6195:1986
▪    DIN ISO 6547-1983    液压流体动力.装有轴承环的活塞密封壳体.尺寸和允公差    Hydraulic fluid power-cylinder; piston seal housings incorporating bearing rings; dimensions and tolerances
▪    DIN ISO 6772-1996    航空航天.流体系统.液压软管、管道和连接组件的脉冲试验 (ISO 6772:1988)    Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies (ISO 6772:1988)
▪    DIN ISO 7181-2001    液压系统和元件.作动筒.缸筒和活塞杆截面比    Hydraulic power systems and components - Cylinders - Bore and rod area ratios (ISO 7181:1991)
▪    DIN ISO 7368-1994    液压流体动力.两通口筒形插入阀.阀腔    Hydraulic fluid power; two-port slip-in cartridge valves; cavities; identical with ISO 7368:1989
▪    DIN ISO 7425-1-1990    液压传动.弹性体赋能塑料面密封沟槽.尺寸和公差.活塞密封沟槽    Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; piston seal housings; identical with ISO 7425-1:1988
▪    DIN ISO 7425-2-1990    液压传动.弹性体赋能塑料面密封沟槽.尺寸和公差.第2部分:活塞杆密封沟槽    Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; rod seal housings; identical with ISO 7425-2:1989
▪    DIN ISO 7632-1986    道路车辆.使用石油基液压制动液的液压盘式制动液压缸的弹性密封垫件(最大工作温度120℃)    Road vehicles; elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 °C max.); identical with ISO 7632, edition 1985
▪    DIN ISO 789-10-1999    农用拖拉机和机械.拖拉机的试验程序.第10部分:机具的液压系统    Agricultural tractors and machinery - Tractors; Test procedures - Part 10: Hydraulic pressure for implements (ISO 789-10:1996)
▪    DIN ISO 8426-1994    液压流体动力.正排量泵和电动机.推导容积的测定    Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity; identical with ISO 8426:1988
▪    DIN ISO 8575-1998    航空航天.流体系统.液压系统管道    Aerospace - Fluid systems - Hydraulic system tubing (ISO 8575:1990)
▪    DIN V ENV 13282-2002    液压道路粘合剂.组分、规范和一致性标准; 德文版本 ENV 13282:2000    Hydraulic road binders - Composition, specifications and conformity criteria; German version ENV 13282:2000
▪    DIN-Fachbericht CEN/TR 14489-2006    耐火液压液.分类和规范.安全、健康和环境保护的选择指南    Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment; German version CEN/TR 14489:2005

▪    EN 10246-1-1996    钢管的无损检测　第1部分：证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验    Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
▪    EN 10246-2-2000    钢管的无损检测　第2部分：证明液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管（埋弧焊除外） 的自动涡流    Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
▪    EN 10275-1999    金属材料　管式环液压试验    Metallic materials - Tube ring hydraulic pressure test
▪    EN 10305-4-2003    高精密度用途的钢管　交货技术条件　第4部分：液压和气动系统用冷拔无缝钢管    Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
▪    EN 12107-1997    塑料管道系统　压注热塑管件、阀门和辅助设备　管道组件压注用热塑 材料的长期液压强度的测定    Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
▪    EN 12622-2001    液压弯板机　机床安全    Safety of machine tools - Hydraulic press brakes
▪    EN 13242-2002    土木工程作业和公路建设中使用的非粘结和液压粘结材料集料    Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
▪    EN 1397-1998    热交换器 室内液压电扇线圈元件 确定性能的试验程序    Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
▪    EN 474-5-1996    土方机械 安全 第5部分：液压挖掘机的要求    Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
▪    EN 50289-3-15-2003    通信电缆　试验方法规范　第3-15部分：机械试验方法　水下电缆耐液压／注意：和EN 50289-3-1联合使用　 　    Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods; Underwater cable resistance to hydrostatic pressure / Note: Applies in conjunction with EN 50289-3-1
▪    EN 50340-2001    液压电缆切割器　在额定电压高达AC 30 kV的电气设施上使用的装置    Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV / Note: Includes Corrigendum of February 2002
▪    EN 693-2001    机械工具 安全 液压压力机    Machine tools - Safety - Hydraulic presses
▪    EN 752-4-1997    室外建筑物的排水系统 第4部分：液压设计和环境考虑    Drain and sewer systems outside buildings - Part 4: Hydraulic design and environmental considerations
▪    EN 773-1999    液压排放管、排水管和污水管构件的一般要求    General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
▪    EN 804-1994    塑料管道系统 压力管道溶焊接头的喷射铸造插接部件 瞬时内部液压阻力的试验方法    Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
▪    EN 81-2-1998+AC-1999    电梯建造和安装的安全规则 第2部分：液压梯    Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts / Note: To be amended by EN 81-2/prA1 (2003-07).
▪    EN 81-2/prA1-2003    电梯建造和安装的安全规则 第2部分：液压梯 修改A1    Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts; Amendment A1 / Note: Intended as an amendment to EN 81-2 (1998-08).
▪    EN 81-2/prA2-2000    电梯建造和安装的安全规则 第2部分：液压梯 修改A2：机械和滑轮空间    Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts; A2: Machinery and pulley spaces
▪    EN 81-3-2000    电梯建造和安装的安全规则 第3部分：电和液压维修电梯    Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts
▪    EN 853-1996    橡胶软管和软管配件 金属丝编织加强液压型 规范    Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
▪    EN 854-1996    橡胶软管和软管配件 纺织增强液压型 规范    Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
▪    EN 855-1996    塑料软管和软管配件 热塑料织物增强液压型 规范    Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification
▪    EN 856-1996    橡胶软管和软管配件 橡胶 包覆螺形线增强液压型 规范    Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
▪    EN 857-1996    橡胶软管和软管配件 液压设备用金属丝编织增强压制型 规范    Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
▪    EN 911-1995    塑料管道系统 热塑塑料压力管道用的弹性密封环型接头和机械接头 外部液压条件下防漏密封试验方法    Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure
▪    EN 982-1996    机械的安全 流体动力系统及其元件的安全要求 液压装置    Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
▪    EN ISO 10592-1995+A1-2000    小艇　液压操舵系统    Small craft - Hydraulic steering systems (ISO 10592:1994)
▪    EN ISO 12922-2002    润滑剂、工业润滑油和有关产品(L类)　H组(液压系统)HFAE、HFAS、 HFB、 HFC、 HFDR 和HFDU各品种的规格(包    Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001)
▪    EN ISO 13938-1-1999    纺织品　织物胀破特性　第1部分：胀破强力测定的液压方法    Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999)
▪    EN ISO 1402-1996    橡胶和塑料软管和软管组件　液压试验    Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994)
▪    EN ISO 4263-2-2003    石油和相关产品　抗氧化油及液体老化性能的测定　TOST试验　第2部分：HFC级液压液试验程序    Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003)
▪    EN ISO 4404-2-2003    石油与相关产品　阻燃液压油防腐蚀性的测定　第3部分：无水液体　    Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003)
▪    EN ISO 5198-1998    离心泵、混流泵和轴流泵　液压性能试验规范　精密级    Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987)
▪    EN ISO 6743-4-2001    润滑剂、工业润滑油和有关产品(L类)　分类　第4部分：H组(液压系统)    Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999)
▪    EN ISO 6803-1997    橡胶或塑料软管和软管组件　无弯曲的液压脉冲试验    Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994)
▪    EN ISO 8032-1999    橡胶和塑料软管和软管组件　液压脉冲弯曲试验(半欧姆型试验)    Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997)
▪    EN ISO 9906-1999    回转动力泵　液压性能验收试验　等级1和2    Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906:1999)
▪    EN ISO 9974-1-2000    通用和液压传动用联接件　带ISO 261 弹性螺纹或金属　金属密封的气门和双头螺栓端头　第1部分：螺纹气门    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996)
▪    EN ISO 9974-2-2000    通用和液压传动用联接件　带ISO 261 弹性螺纹或金属　金属密封的气门和双头螺栓端头　第2部分：弹性密封的    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996)
▪    EN ISO 9974-3-2000    通用和液压传动用联接件　带ISO 261 弹性螺纹或金属　金属密封的气门和双头螺栓端头　第3部分：金属　金属    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)
▪    prEN 10305-6-1999    高精密度用途的钢管　交货技术条件　第6部分：液压和气动系统用冷拔焊接钢管    Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
▪    prEN 12312-19-1999    航空地面辅助设备　特殊要求　第19部分：飞机起重器、轴式起重器和液压尾柱    Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions
▪    prEN 13204-1998    用于消防和营救服务的双重作用液压救援工具    Double acting hydraulic rescue tools for fire and rescue service use
▪    prEN 13802-2000    铁路设备 悬挂构件 液压减振冲器    Railway applications - Suspension components - Hydraulic dampers
▪    prEN 14227-1-2001    未粘合及液压粘合的混合物 规范 第1部分：公路路基和底基层用水泥粘合混合物    Unbound and hydraulically bound mixtures - Specifications - Part 1: Cement bound mixtures for road bases and subbases
▪    prEN 14227-2-2001    未粘合及液压粘合的混合物 规范 第2部分 矿渣粘合混合物 定义、成分、分类    Unbound and hydraulically bound mixtures - Specifications - Part 2: Slag bound mixtures - Definitions, composition, classification
▪    prEN 14227-3-2001    未粘合及液压粘合的混合物 规范 第3部分： 粘合混合物用灰分 定义、成分、分类    Unbound and hydraulically bound mixtures - Specifications - Part 3: Fly ash for bound mixtures - Definitions, composition, classification
▪    prEN 14227-4-2001    未粘合及液压粘合的混合物 规范 第4部分：液压粘合混合物用灰分 定义、成分、分类    Unbound and hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures; Definitions, composition, classification
▪    prEN 14227-5-2002    未粘合及液压粘合的混合物 规范 第5部分 用液压道路粘合剂粘合的粒状物料 规范 第3部分：定义、成份、    Unbound and hydraulically bound mixtures - Specifications - Part 5: Granular materials bound with hydraulic road binders; Definitions, composition, classification
▪    prEN 14359-2002    液压动力设备的气压蓄能器    Gas-loaded accumulators for fluid power applications
▪    prEN 4382-1997    航空航天系列　固溶处理耐热合金 NI-PH3601 (NiCr22Mo9Nb)　液压用无缝管　 D≤50 mm、a≤3 mm    Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) solution treated - Seamless tubes for hydraulic application D 50 mm, a 3 mm
▪    prEN 474-5-2001    土方机械 安全 第5部分：液压挖掘机的要求    Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

▪    ANSI B11.2-1995    机床.液压机.制造、维护和使用的安全性要求    Machine tools - Hydraulic power presses - Safety requirements for construction, care, and use
▪    ANSI B93.10M-1969    方头液压传动缸的静态压力旋转法    Static Pressure Rating Methods of Square Head Fluid Power Cylinders
▪    ANSI B93.112M-1988    液压气动阀内部漏泄特性的测定方法    Hydraulic Fluid Power - Valves - Method for Determining the Internal Leakage Characteristics
▪    ANSI B93.46-1978    过滤器元件、可清洁表面型液压传动孔大小的测定方法    Filter Element, Method of Determining the Pore Size of a Cleanable Surface Type Hydraulic Fluid Power
▪    ANSI B93.54M-1981    液压传动.组装系统.实现辗轧洁净度的方法    Hydraulic Fluid Power - Assembled Systems - Method for Achieving Roll-off Cleanliness
▪    ANSI B93.62M-1982    液压传动.线性执行器中往复式动力密封设备.泄露的试验、测量和报告方法    Hydraulic Fluid Power - Reciprocating Dynamic Sealing Devices in Linear Actuators - Method of Testing, Measuring, and Reporting Leakage
▪    ANSI B93.76-1988    液压气动缸.往复运动用活塞和活塞杆密封腔的尺寸和公差    Hydraulic Fluid Power - Cylinders - Housings for Piston and Rod Seals in Reciprocating Applications - Dimensions and Tolerances
▪    ANSI B93.77M-1987    液压气动缸传动安装阀安装表面的标准尺寸    Hydraulic Fluid Power - Cylinder Actuator Mounted Valves - Standard Dimensions for Mounting Surfaces
▪    ANSI B93.95M-1987    液压气动用容积式泵、马达、整体传输.稳态性能的测量    Hydraulic Fluid Power - Positive Displacement Pumps, Motors, and Integral Transmissions - Determination of Steady-State Performance
▪    ANSI B93.98M-1987    液压用旋转轴凸缘密封圈的公称尺寸和公差    Fluid Power - Rotary Shaft Lip Type Seals - Nominal Dimensions and Tolerances
▪    ANSI S2.48-1993    振动发生器的伺服液压试验设备.特性的描述方法    Servo-Hydraulic Test Equipment for Generating Vibration - Methods of Describing Characteristics
▪    ANSI/(NFPA) T2.12.1-2002    液压传动.系统和产品.测量平均稳态压力的方法    Hydraulic fluid power - Systems and products - Method of measuring average steady-state pressure (to be used in conjunction with ANSI/(NFPA)T2.12.10)
▪    ANSI/(NFPA) T2.12.10-2002    推荐实施规程.液压传动.系统和产品.检验一般测量原则和公差    Recommended practice - Hydraulic fluid power - Systems and products - Testing general measurement principles and tolerances (to be used in conjunction with ANSI/(NFPA)T2.12.1)
▪    ANSI/(NFPA) T3.19.25 R1-2004    信息报告.液压系统.密封装置.弹性密封件和隔离装置的存储、搬运和安装    Information Report - Fluid Power Systems - Sealing Devices - Storage, Handling, and Installation of Elastomeric Seals and Exclusion Devices
▪    ANSI/ASAE S201.4-1982    农用拖拉机拖挂型农具、液压遥控汽缸的应用    Agricultural Tractors and Trailing-Type Agricultural Implements, Application of Hydraulic Remote Control Cylinders to
▪    ANSI/ASAE S366.2-2004    农业拖拉机和机械.一般用途快速液压接头    Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
▪    ANSI/ASME A112.19.13-2001    电动液压抽水马桶    Electrohydraulic Water Closets
▪    ANSI/ASTM D1599-1999    塑料管材、管道和管件短时液压故障压力试验方法    Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
▪    ANSI/ASTM D2070-1991    液压油的热稳定性的试验方法(05.01)    Method for Thermal Stability of Hydraulic Oils (05.01)
▪    ANSI/ASTM D2619-1995    液压油的水解稳定性的试验方法(酒瓶试验法)(05.02)    Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Test Method), Test Method for (05.02)
▪    ANSI/ASTM D4174-1989    石油液压系统的清洁、冲洗和净化惯例    Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems, Practice for the (05.02)
▪    ANSI/ASTM D4636-1998    液压油、航空透平引擎润滑剂和其他高精炼油的腐蚀与氧化稳定性测试方法    Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
▪    ANSI/ASTM D4898-1990    重力测量分析液压油不溶性污染试验方法    Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
▪    ANSI/ASTM D4998-1995    评定拖拉机液压油耐磨特性的试验方法    Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids (05.03)
▪    ANSI/ASTM D5306-1997    润滑油和液压液的线性传播速率的测试新方法    New Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids (05.03)
▪    ANSI/ASTM D5534-1999    液压液汽相生锈预防特性的测试方法    Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
▪    ANSI/ASTM D5846-2002    液压流体和涡轮机油的一般氧化试验方法    Test Method for Universal Oxidation Test for Hydraulic Fluids and Turbine Oils
▪    ANSI/ASTM D6006a-1997    液压液生物降解性的评定指南    Guide for Assessing Biodegradabillty of Hydraulic Fluids
▪    ANSI/ASTM D6046-2002    环境冲击用液压液的分类    Classification of Hydraulic Fluids for Environmental Impact
▪    ANSI/ASTM D6158-2005    矿物液压油规范    Specification for Mineral Hydraulic Oils
▪    ANSI/ASTM D6351-1999    液压油低温流动性和外观测定方法    Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
▪    ANSI/ASTM D6546-2000    工业用液压油密封圈兼容性的测定试验方法和提议限制    Test Methods and Suggested Limits for Determining the Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
▪    ANSI/ASTM D6595-2005    用转盘电极原子发射光谱法测定已用润滑油或已用液压液中磨损金属和杂质的试验方法    Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
▪    ANSI/ASTM D6813a-2002    活塞泵的液压流体性能的评定指南    Guide for the Performance Evaluation of Hydraulic Fluids for Piston Pumps
▪    ANSI/ASTM D6973-2005    高压定容叶轮泵中石油液压液耐磨特性指示的试验方法    Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
▪    ANSI/ASTM D7043a-2004    固定容量离心泵中石油和非石油液压液磨损特性指示的试验方法    Test Method for Indicating Wear Characteristics of Petroleum and Non-petroleum Hydraulic Fluids in a Constant Volume Vane Pump
▪    ANSI/ASTM D7044a-2004    可生物降解的耐火液压液规范    Specification for Biodegradable Fire Resistant Hydraulic Fluids
▪    ANSI/ASTM F1794-1997    气体(除氧气)和液压系统手动球形阀门规范    Specification for Hand-Operated Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
▪    ANSI/ASTM F2164-2002    采用液压法进行聚乙烯压力管道系统场漏试验的惯例    Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
▪    ANSI/IEEE 1249-1996    液压电力工厂以计算机为基础的自动化控制指南    Guide for Computer-Based Control for Hydroelectric Power Plant Automation
▪    ANSI/ISO 5675-1992    农业拖拉机和机械.一般用途快速液压接头    Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
▪    ANSI/SAE J/ISO10567-1998    土方机械.液压挖掘机.提升性能    Earthmoving Machinery - Hydraulic Excavators - Lift Capacity
▪    ANSI/SAE J/ISO7135-1998    土方机械.液压挖掘机.术语和商用规范    Earthmoving Machinery - Hydraulic Excavators - Terminology and Commercial Specifications
▪    ANSI/SAE J1036-1993    农用拖拉机圆柱形液压系统管接头的尺寸标准    Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors
▪    ANSI/SAE J1118-1993    摩托车制动系统试验程序用液压阀    Hydraulic Valves for Motor Vehicle Brake Systems Test Procedure
▪    ANSI/SAE J1371-1993    液压挖掘机摆动的最低性能和评定程序    Hydraulic Excavator Swing Minimum Performance and Rating Procedure
▪    ANSI/SAE J1401-1993    道路车辆.使用非石油基液压油的液压制动软管组件    Road Vehicle - Hydraulic Brake Hose Assemblies for Use with Non-Petroleum Base Hydraulic Fluids
▪    ANSI/SAE J1406-1993    汽车辆液压制动软管的应用    Application of Hydraulic Brake Hose to Motor Vehicles
▪    ANSI/SAE J1568-1993    液压盘式制动器制动缸塑料活塞用材料    Materials for Plastic Pistons for Hydraulic Disc Brake Cylinders
▪    ANSI/SAE J1644-1998    液力和一般用途金属管联结件.螺纹式液压传动联结件的试验方法    Metallic Tube Connections for Fluid Power and General Use - Test Methods for Threaded Hydraulic Fluid Power Connectors
▪    ANSI/SAE J1790-1998    自行式清扫器和擦洗器方向控制要求.单路液压辅助服务系统    Self-Propelled Sweepers and Scrubbers Steering Requirements - Single-Circuit Hydraulic Servo-Assisted Systems
▪    ANSI/SAE J2244/3-1998    液压传动和通用连接.带ISO 261螺纹和O形密封圈的孔及螺柱端.第3部分:轻型(L系列)螺柱端.尺寸、设计、试验方    Connections for Fluid Power and General Use-Ports and Stud Ends with ISO 261 Threads and O-Rings Sealing - Part 3: Light-Duty (L Series) Stud Ends - Dimensions, Design, Test Methods, and Requirements
▪    ANSI/SAE J2333-1998    船舶系统和设备液压系统.油滤选用参数    Ship Systems and Equipment Hydraulic Systems - Filter Selection Parameters
▪    ANSI/SAE J283-1993    配备有三点式悬挂装置的农用拖拉机液压提升能力测量程序    Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Point Hitch, Test Procedure for
▪    ANSI/SAE J514-1998    液压管件    Hydraulic Tube Fittings
▪    ANSI/SAE J516-1997    液压软管配件    Hydraulic Hose Fittings
▪    ANSI/SAE J517-1998    液压软管    Hydraulic Hose
▪    ANSI/SAE J518-1993    四螺栓拼合法兰型液压法兰管、管道及软管接头    Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type
▪    ANSI/SAE J641-1993    液压传动术语    Hydrodynamic Drives Terminology
▪    ANSI/SAE J648-1993    自动变速器的液压控制系统术语    Automatic Transmission Hydraulic Control Systems Terminology
▪    ANSI/UL 1739-2004    消防用液压控制阀    Pilot-Operated Pressure-Control Valves for Fire-Protection Service
▪    ASME A112.19.13-2001    电动液压抽水马桶    (Electrohydraulic water closets)
▪    ASME A17 Checklist 3-1991    液压升降机试验检验检查表(除保安器和配重外的直接柱塞)    (Checklist for inspection and test of hydraulic elevators (for direct plunger without safeties or counterweights))
▪    ASME A17.2.2-1997    液压升降机的检验员手册(包括液压升降机的检验程序)    (Inspectors' manual for hydraulic elevators (includes inspection procedures for hydraulic elevators))
▪    ASME A17.2.2a Addenda-1998    液压升降机的检验员手册.附录    (Inspectors' manual for hydraulic elevators; Addenda)
▪    ASME PTC 29-1965    液压汽轮发电机组的速度调节系统    (Speed-governing systems for hydraulic turbine-generator units)
▪    ASME Y32.10-1967    液压示意图的图形符号    (Graphic symbols for fluid power diagrams)
▪    ASTM A 822/A 822M-2004    液压系统设备用无缝冷拔碳素钢管的标准规范    Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
▪    ASTM C 109/C 109M-2005    液压水泥灰浆的抗压强度标准试验方法(使用2英寸或50毫米管试样)    Standard Test Method for Compressive Strength of Hydraulic Cement Mortars(Using 2-in. or [50-mm] Cube Specimens)
▪    ASTM C 1196-2004    用液压千斤顶现场测量实心砌块抗压应力的标准试验方法    Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
▪    ASTM C 1197-2004    用液压千斤顶法现场测量砖石建筑可变形性的标准试验方法    Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
▪    ASTM C 1306a-2005    液用防水薄膜抗静液压力的标准试验方法    Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
▪    ASTM D 1599-1999    塑料管道和配件耐短时液压力的标准试验方法    Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
▪    ASTM D 2070-1991    液压油热稳定性的标准试验方法    Standard Test Method for Thermal Stability of Hydraulic Oils
▪    ASTM D 2619-1995    液压液水解稳定性的标准试验方法(酒瓶法)    Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
▪    ASTM D 3786-2001    织物液压破裂强度的标准测试方法.薄膜破裂强度试验器法    Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method
▪    ASTM D 4174-1989    石油液压系统的清理、冲洗及净化的标准实施规程    Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
▪    ASTM D 4636-1999    液压油、飞机涡轮发动机润滑油和其他高精炼油的腐蚀性和氧化稳定性的试验方法    Standard Test Method for Corrosiveness and Oxidation qualility of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
▪    ASTM D 4716-2004    使用恒定压头测定土工合成织物(在平面中)单位宽度流速和液压透射率的试验方法    Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
▪    ASTM D 4998-1995    评定牵引车液压液磨损特性的标准试验方法    Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
▪    ASTM D 5306-1992    润滑油和液压液线性火焰传播速度的测试方法    Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
▪    ASTM D 5534-1994    液压液体汽相防锈性能的标准试验方法    Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
▪    ASTM D 5621-2001    液压流体的声波剪切稳定性标准试验方法    Standard Test Method for Sonic Shear Stability of Hydraulic Fluid
▪    ASTM D 5846-2002    使用通用氧化试验设备进行液压液和涡轮机油的通用氧化试验的标准试验方法    Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
▪    ASTM D 5856-1995    使用刚性壁压缩模式磁导率计测量多孔性材料液压导电率的标准试验方法    Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
▪    ASTM D 5912-1996    通过超阻尼井回应顶部的瞬息变化测定自由含水层液压导电率的分析程序的标准试验方法    Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
▪    ASTM D 6006a-1997    评定液压流体生物降解性的标准指南    Standard Guide for Assessing Biodegradability of Hydraulic Fluids
▪    ASTM D 6046-2002    环境冲击液压液的标准分类    Standard Classification of Hydraulic Fluids for Environmental Impact
▪    ASTM D 6080-1997    液压流体粘滞特性定义的标准操作    Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
▪    ASTM D 6158-2005    矿物液压油的标准规范    Standard Specification for Mineral Hydraulic Oils
▪    ASTM D 6351-1999    测定液压液低温流动性和表面特性的标准试验方法    Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
▪    ASTM D 6391-2006    使用从钻孔渗流的两个阶段对多孔材料液压传导性限值进行现场测量的标准试验方法    Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
▪    ASTM D 6519-2005    用液压操作的固定活塞采样器进行土壤取样的标准实施规程    Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
▪    ASTM D 6527-2000    用稳态离心法测定多孔介质中不饱和和饱和液压传导性的标准试验方法    Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
▪    ASTM D 6546-2000    工业液压液用弹性密封件能力测定的标准试验方法和建议极限值    Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
▪    ASTM D 6574-2000    径向流动法测定土工合成物(平面)液压透射率的试验方法    Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
▪    ASTM D 6595-2000    用旋转盘电极原子发射光谱法测定已用润滑油或已用液压流体中杂质的标准试验方法    Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
▪    ASTM D 6766-2006    评价被潜在不可溶液体渗透的土工合成粘土衬液压特性的标准试验方法    Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
▪    ASTM D 6813a-2002    活塞泵的液压液性能评定的标准指南    Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
▪    ASTM D 6973-2005    高压定容叶轮泵中石油液压液磨损特性指示的标准试验方法    Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
▪    ASTM D 7043a-2004    定容叶轮泵中石油和非石油液压液的磨损特性指示的标准试验方法    Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
▪    ASTM D 7044a-2004    可生物降解的阻燃型液压液的标准规范    Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
▪    ASTM E 641-2001    农用液压喷嘴的试验的标准方法    Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
▪    ASTM E 979-1991    评估用逆乳液与其它含水液压液作防腐剂的抗微生物制剂的试验方法    Test Method for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids
▪    ASTM F 1794-1997    手动、球型阀气体(除氧气)和液压系统标准规范    Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
▪    ASTM F 2164-2002    使用静液压的聚乙烯压力管道系统的现场泄漏试验的标准实施规范    Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
▪    ASTM F 862-1993    航空航天液压流体的氯离子浓度及pH值的试验方法    Test Method for pH and Chloride-Ion Concentration of Aerospace Hydraulic Fluids
▪    UL 1469-1995    回流专用止回阀的阀身强度和液压损失率检验    (Strength of body and hydraulic pressure loss testing of backflow special check valves )
▪    UL 1739-1994    消防设备用液压控制的压力控制阀    (Pilot-operated pressure-control valves for fire-protection service )

▪    BS 1377-6-1990    土木工程用土壤试验方法.第6部分:在液压压力盒内并且用孔隙压力测量进行固结和渗透率试验    Methods of test for soils for civil engineering purposes - Consolidation and permeability tests in hydraulic cells and with pore pressure measurement
▪    BS 1486-4-1981    润滑脂管嘴规范.第4部分:液压润滑脂管嘴规范    Lubricating nipples - Specification for hydraulic grease nipples
▪    BS 2000-313-2003    石油和石油产品的试验方法.液压油和润滑油的释气值测定    Methods of test for petroleum and its products - Determination of air release of lubricating and hydraulic oils
▪    BS 2M 49-1997    飞机.液压组件.已校准组件液体指示标记    Aircraft - Hydraulic components - Marking to indicate fluid for which component is approved
▪    BS 2M 51-1989    液压系统及元件压力和温度分类    Classification for pressure and temperature for fluid systems and components
▪    BS 2M 53-1997    飞机.液压系统.管道和管接头热冲击试验    Aircraft - Fluid systems - Thermal shock testing of piping and fittings
▪    BS 3810-2-1965    材料装卸术语.第2部分:输送机及提升机(不包括气动和液压装卸)术语    Glossary of terms used in materials handling - Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling)
▪    BS 3810-3-1967    材料装卸术语.第3部分:气动及液压装卸术语    Glossary of terms used in materials handling - Terms used in connection with pneumatic and hydraulic handling
▪    BS 3M 60-1998    液压系统24度锥形可分管道接头.通用规范    Separable tube fittings for fluid systems, 24 ° cone - General specification
▪    BS 4062-2-1990    液压动力系统阀门.第2部分:性能测定方法    Valves for hydraulic fluid power systems - Methods for determining performance
▪    BS 4361-38-1990    木工机械.第38部分:带液压夹紧装置的立式木丝切丝机命名    Woodworking machines - Nomenclature for vertical shredding machines for wood wool production, with hydraulic clamping
▪    BS 4368-4-1984    液压和通用压合管接头.第4部分:型号试验要求规范    Metallic tube connectors for fluid power and general use - Specification for type test requirements
▪    BS 4617-1983    液压流体动力传输用动力泵和电动机性能的测定方法    Methods for determining the performance of pumps and motors for hydraulic fluid power transmission
▪    BS 4742-2-1993    农用机械液压设备.第2部分:通用快速液压管接头规范    Hydraulic equipment for agricultural machinery - Specification for quick-action hydraulic couplers for general purposes
▪    BS 4742-3-1985    农用机械液压设备.第3部分:挂车用单动倾卸伸缩筒尺寸和额定压力规范    Hydraulic equipment for agricultural machinery - Specification for dimensions and pressure rating of single-acting telescopic tipping cylinders for trailers
▪    BS 4742-4-1985    农用机械液压设备.第4部分:挂车和机具用制动系统用液压管接头规范    Hydraulic equipment for agricultural machinery - Specification for hydraulic couplings on braking systems for trailers and trailed equipment
▪    BS 4742-5-1985    农用机械液压设备.第5部分:挂车和机具用制动气缸尺寸规范    Hydraulic equipment for agricultural machinery - Specification for dimensions of braking cylinders for trailers and trailed equipment
▪    BS 4742-6-1988    农业机械用液压设备.第6部分:农业拖拉机液压回程到槽口的尺寸和位置规范    Hydraulic equipment for agricultural machinery - Specification for dimensions and location of agricultural tractor hydraulic return to sump porting
▪    BS 4742-7-1989    农用机械液压设备.第7部分:农用拖挂车辆液压制动系统管接头用油口连接规范    Hydraulic equipment for agricultural machinery - Specification for port connections for agricultural trailed vehicle hydraulic brake couplings
▪    BS 4742-8-1990    农用机械用液压设备.第8部分:农用拖拉机分置式液压和控制装置颜色编码方法    Hydraulic equipment for agricultural machinery - Method for colour coding of remote hydraulic power services and controls on agricultural tractors
▪    BS 4L 54-1986    99%铝管规范(冷拔:无缝:液压试验)(壁厚不超过12mm)    Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness)
▪    BS 4L 56-1986    铝-2<1/4>%镁合金管规范(强度符号-O)(无缝管:液压试验)(壁厚不超过12mm)    Specification for tube of aluminium-21/4% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness)
▪    BS 5173-102.10-1990    橡胶和塑料软管组件的试验方法.第102部分:液压试验.第10节:吸油和放油软管静液压试验    Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Hydrostatic tests for oil suction and discharge hose
▪    BS 5173-102.3-1988    橡胶和塑料软管及软管组件试验方法.第102部分:液压试验.第3节:燃料分配泵软管体积膨胀测定    Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of fuel-dispensing pump hoses
▪    BS 5173-102.4-1990    橡胶和塑料软管组件试验方法.第102部分:液压试验.第4节:液压软管体积膨胀测定    Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of hydraulic hoses
▪    BS 5173-102.8-1987    橡胶和塑料软管及软管组件试验方法.第102部分:液压试验.第8节:硬质增强热塑性塑料螺旋管压力脉冲试验    Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Pressure impulse test for rigid helix reinforced thermoplastics hoses
▪    BS 5242-1-1987    液压动力流体气缸筒用管材.第1部分:特别精加工表面的钢管规范    Tubes for fluid power cylinder barrels - Specification for steel tubes with specially finished surfaces
▪    BS 5242-2-1983    液压气缸筒用管.第2部分:精镗有色金属管规范    Tubes for fluid power cylinder barrels - Specification for non-ferrous metallic tubes with specially finished bores
▪    BS 5244-1986    液压橡胶软管及软管组件的使用、贮藏及寿命期限推荐标准    Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies
▪    BS 5327-1976    液压装置用后直角弯头规范    Specification - Swept elbow bends for fluid power applications
▪    BS 5380-1984    用O 型圈密封及G 系列紧固螺纹的液压系流入口及连接螺栓规范    Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads
▪    BS 5412-1996    适用于最大PN 10、最低液压0.01MPa(0.1bar)的低阻力单一龙头和组合龙头组件(额定尺寸<1/2>和<1/4>)规范    Specification for low-resistance single taps and combination tap assemblies (nominal size 1/2 and 3/4) suitable for operation at PN 10 max - and a minimum flow pressure of 0.01 MPa (0.1 bar)
▪    BS 5540-3-1978    评定液压油颗粒物污染规范.第3部分:瓶装油液取样方法    Specification for evaluating particulate contamination of hydraulic fluids - Methods of bottling fluid samples
▪    BS 5540-6-1990    液压油颗粒污染评定.第6部分:颗粒自动计数器校准方法(使用单一尺寸胶乳球)    Evaluating particulate contamination of hydraulic fluids - Method of calibrating liquid automatic particle-count instruments (using mono-sized latex spheres)
▪    BS 5540-7-1991    液压油颗粒污染评定.第7部分:污染等级测定方法(称重法)    Evaluating particulate contamination of hydraulic fluids - Method of determining the level of contamination (by the gravimetric method)
▪    BS 5655-10.2.1-1995    电梯与服务电梯.第10部分:试验和检验规范.第2节:液压机.第1小节:新升降机交付使用试验    Lifts and service lifts - Specification for the testing and examination of lifts and service lifts - Hydraulic lifts - Commissioning tests for new lifts
▪    BS 5655-12-2005    电梯与服务电梯.现有液压升降机改进的操作实施规程    Lifts and service lifts - Code of practice for the undertaking of modifications to existing hydraulic lifts
▪    BS 5751-1987    往复运动的液压密封件壳体尺寸规范    Specification for dimensions of housings for hydraulic seals for reciprocating applications
▪    BS 5944-1-1992    液压动力系统和部件气动噪声测量.第1部分:液压泵试验方法    Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps
▪    BS 5944-2-1992    液压动力系统和部件气动噪声测量.第2部分:电动机试验方法    Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for motors
▪    BS 5944-4-1984    液压动力系统和部件空气噪音测量.第4部分:流量和压力控制阀声功率级测定方法    Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure
▪    BS 5944-5-1985    液压系统和部件气动噪音测量.第5部分:使消声室测定液压泵声功率等级的简易方法    Measurement of airborne noise from hydraulic fluid power systems and components - Simplified method of determining sound power levels from pumps using an anechoic chamber
▪    BS 5944-6-1992    液压动力系统和部件气动噪声测量.第6部分:平行六面体传声器阵列测试液压泵噪声    Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps using a parallelepiped microphone array
▪    BS 6100-2.5-1991    建筑和土木工程术语.第2部分:土木工程.第5集:液压工程和施工    Glossary of building and civil engineering terms - Civil engineering - Hydraulic engineering and construction work
▪    BS 6142-1981    农用拖拉机和农机液压系统技术数据的表述规范    Specification for presentation of technical data on hydraulic systems of agricultural tractors and machinery
▪    BS 6331-4-1985    单杆双动液压作动筒安装尺寸.第4部分:63bar系列(包括有关部件)规范    Mounting dimensions of single rod double acting hydraulic cylinders - Specification for 63 bar series, including associated components
▪    BS 6347-2-1983    农用拖拉机性能评定.第2部分:液压功率和提升能力测定方法    Performance assessment of agricultural tractors - Methods for determination of hydraulic power and lifting capacity
▪    BS 6361-1988    电控液压设备用三相插接件规范    Specification for three-pin plug connectors for electrically controlled fluid power equipment
▪    BS 6525-1984    液压流体动力系统用储液器的设计与建造规范    Specification for design and construction of reservoirs used in hydraulic fluid power systems
▪    BS 6537-1984    液压流体设备用U型接头规范    Specification for staple type connectors for hydraulic fluid power applications
▪    BS 6911-11-1997    运土机械试验.液压挖掘机铲斗和反向铲装载铲斗容量额定值测定方法    Testing earth-moving machinery - Method for the determination of volumetric ratings for hydraulic excavator buckets and backhoe loader buckets
▪    BS 6911-3-1990    运土机械试验.第3部分:液压挖掘机工具强度测量    Testing earth-moving machinery - Measurement of tool forces of hydraulic excavators
▪    BS 6911-8-1993    运土机械试验.第8部分:机械液压系统操作倾斜度极限值的测定(静态试验法)    Testing earth-moving machinery - Determination of slope limits for machine fluid systems operation (static test method)
▪    BS 6912-1-1997    运土机械的安全性.液压挖掘机和反铲装载机起重吊杆放下控制装置    Safety of earth-moving machinery - Specification for hydraulic excavator and backhoe loader boom lowering control device
▪    BS 6912-9-1992    运土机械的安全.第9部分:液压挖掘机的升降能力的计算和检验方法    Safety of earth-moving machinery - Methods for the calculation and verification of the lift capacity of hydraulic excavators
▪    BS 6914-8-1993    运土机械术语(包括尺寸和图形符号定义).第8部分:液压挖掘机用术语和商务规范    Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Terminology and commercial specifications for hydraulic excavators
▪    BS 7198-1-1989    液压流体动力快速连接件.第1部分:尺寸和性能规范    Hydraulic fluid power quick-action couplings - Specification for dimensions and performance
▪    BS 7201-1-1990    液压流体动力.气体加载蓄能器.第1部分:水容量0.5L以上无缝钢蓄能器体规范    Hydraulic fluid power - Gas loaded accumulators - Specification for seamless steel accumulator bodies above 0.5 L water capacity
▪    BS 7250-1989    液压传动正排量泵和电动机导出量的测定方法    Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors
▪    BS 7275-3-1995    液压流体动力马达特性的测定.第3部分:恒定流和恒定扭矩法    Determination of hydraulic fluid power motor characteristics - Method at constant flow and at constant torque
▪    BS 7285-1990    振动发生伺服液压试验设备的特性描述方法    Method for describing characteristics of servo-hydraulic test equipment for generating vibration
▪    BS 7287-1990    耐火液压油使用指南    Guide for the use of fire-resistant hydraulic fluids
▪    BS 7296-1-1990    液压动力卡盘式阀的空腔.第1部分:二通镶套滑动阀规范    Cavities for hydraulic fluid power cartridge valves - Specification for two-port slip-in valves
▪    BS 7388-1991    液压动力系统防泄漏指南    Guide for prevention of leaks from hydraulic fluid power systems
▪    BS 7403-5-1991    内燃机用全流式润滑油过滤器.第5部分:冷起动摸拟和液压脉冲耐久性的试验方法    Full-flow lubricating oil filters for internal combustion engines - Method of test for cold start simulation and hydraulic pulse durability
▪    BS 7416-1991    液压动力系统用精密无缝冷拔低碳钢管规范    Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems
▪    BS 7417-1991    平面'O'形密封液压耦合器界面尺寸规范    Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings
▪    BS 7504-1995    液压流体动力.在压力25 MPa 和40 MPa(250 巴 和400 巴)条件下使用的四螺钉、单片正方形法兰连接器    Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
▪    BS 778-1966    液压用钢管与接头规范    Specification for steel pipes and joints for hydraulic purposes
▪    BS 7791-1995    农业拖拉机.液压器具    Agricultural tractors - Hydraulic pressure for implements
▪    BS AU 216-1-1987    道路车辆用石油基制动液的液压制动系统.第1部分:石油基基准液规范    Hydraulic brake systems using petroleum base brake fluids for road vehicles - Specification for petroleum base reference fluid
▪    BS DD ISO/TR 16144-2002    液压流体动力.液体粒子自动计算器的校验.SRM 2806 标准参照物质认证所使用的程序    Hydraulic fluid power - Calibration of liquid automatic particle counters - Procedures used to certify the standard reference material SRM 2806
▪    BS EN 10246-1-1996    钢管的无损检验.证明液压系统密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验    Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
▪    BS EN 10275-1999    金属材料.管形环液压试验    Metallic materials - Tube ring hydraulic pressure test
▪    BS EN 10305-4-2003    精密仪器用钢管.技术交货条件.液压和气动系统用无缝冷拉管    Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes for hydraulic and pneumatic power systems
▪    BS EN 10305-6-2005    精密仪器用钢管.交货技术条件.液压和气动动力系统用焊接冷拉管材    Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes for hydraulic and pneumatic power systems
▪    BS EN 12107-1998    塑料管道系统.注射模塑热塑性塑料管件、阀门和辅助设备.注射模塑管道元件用热塑性材料的长期液压强度的测定    Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
▪    BS EN 12162-2001    液体泵.安全要求.液压静态试验程序    Liquid pumps - Safety requirements - Procedure for hydrostatic testing
▪    BS EN 12312-19-2005    飞行器地面支持设备.特殊要求.飞行器千斤顶、轴式千斤顶和液压机尾托架    Aircraft ground support equipment - Specific requirements - Aircraft jacks, axle jacks, and hydraulic tail stanchions
▪    BS EN 12332-2-2002    橡胶或塑料涂覆织物.抗破碎强度的测定.液压法    Rubber- or plastics-coated fabrics - Determination of bursting strength - Hydraulic method
▪    BS EN 12622-2001    机床安全性.液压弯曲机    Safety of machine tools - Hydraulic press brakes
▪    BS EN 12639-2000    液压泵和泵组.噪音测试规程.2级和3级精度    Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy
▪    BS EN 12723-2000    液压泵.泵和设备的通用术语.定义、数量、字母符号和单位    Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units
▪    BS EN 12952-14-2004    水管锅炉和辅助设备.使用液压氨和氨水溶液的废气DENOX系统的要求    Water-tube boilers and auxiliary installations - Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution
▪    BS EN 13204-2005    消防和救生用双动液压救生工具.安全和性能要求    Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements
▪    BS EN 13242-2002    土木工程和道路建筑用非粘合的和液压结合材料用集料    Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
▪    BS EN 13286-3-2003    松散的和液压粘合的混合料.实验室参考密度和水含量的测试方法.有控制参数的振动压缩    Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
▪    BS EN 13286-4-2003    松散的和液压粘合的混合料.实验室参考密度和水含量的测试方法.振动锤    Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating hammer
▪    BS EN 13286-40-2003    松散的和液压粘合的混合料.测定液压粘合混合料直接抗拉强度的试验方法    Unbound and hydraulically bound mixtures - Test method for determination of the direct tensile strength of hydraulically bound mixtures
▪    BS EN 13286-41-2003    松散的和液压粘合的混合料.测定液压粘合混合料抗压强度的试验方法    Unbound and hydraulically bound mixtures - Test method for determination of the compressive strength of hydraulically bound mixtures
▪    BS EN 13286-42-2003    松散的和液压粘合的混合料.测定液压粘合混合料非直接拉力强度的试验方法    Unbound and hydraulically bound mixtures - Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
▪    BS EN 13286-43-2003    松散的和液压粘合的混合料.测定液压粘合混合料弹性模量的试验方法    Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
▪    BS EN 13286-46-2003    松散的和液压粘合的混合料.测定湿度值试验方法    Unbound and hydraulically bound mixtures - Test method for the determination of the moisture condition value
▪    BS EN 13286-5-2003    松散的和液压粘合的混合料.实验室参考密度和水含量的测试方法.振动台    Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating table
▪    BS EN 13408-2002    液压固化地板修平和/或整平复合物的试验方法.粘结强度的测定    Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength
▪    BS EN 13409-2002    液压固化地板修平和/或整平复合物的试验方法.凝固时间测定    Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time
▪    BS EN 13802-2004    铁路设施.悬挂部件.液压减震器    Railway applications - Suspension components - Hydraulic dampers
▪    BS EN 14227-13-2006    液力粘结混合料.规范.液压道路粘合剂处理的土壤    Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder
▪    BS EN 14653-1-2005    地面维护支撑用人工操纵液压支撑系统.产品规范    Manually operated hydraulic shoring systems for groundwork support - Product specifications
▪    BS EN 14653-2-2005    地面维护支撑用人工操纵液压支撑系统.计算或试验评定    Manually operated hydraulic shoring systems for groundwork support - Assessment by calculation or test
▪    BS EN 1487-2000    建筑物阀门.液压安全组.试验和要求    Building valves - Hydraulic safety groups - Tests and requirements
▪    BS EN 1777-2004    防火和救援服务用液压升降平台.安全要求和试验    Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
▪    BS EN 1804-1-2002    地下采矿机械.液压矿顶支撑物的安全性要求.支撑装置及一般要求    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Support units and general requirements
▪    BS EN 1804-2-2002    地矿机械.液压矿顶支撑物的安全要求.动力装置支脚和冲压件    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Power set legs and rams
▪    BS EN 1804-3-2006    地矿机械.液压矿顶支撑物的安全要求.液压控制系统    Machines for underground mines - Safety requirements for hydraulic powered roof supports - Hydraulic control systems
▪    BS EN 2591-515-2005    航空航天系列.电和光学连接元件.试验方法.液压稳定性    Elements of electrical and optical connection — Test methods — Part 515: Hydrolytic stability
▪    BS EN 474-5-1996    土方机械.安全.液压挖掘机的要求    Earth-moving machinery - Safety - Requirements for hydraulic excavators
▪    BS EN 50340-2002    电缆切割液压装置.用于公称电压在交流30KV以下电气设施的电缆切割装置    Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV
▪    BS EN 60041-1995    水轮机,现场验收试验测定蓄水泵和涡轮泵液压性能    Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
▪    BS EN 61362-1998    液压涡轮控制系统规范指南    Guide to specification of hydroturbine control systems
▪    BS EN 693-2001    机床的安全性.液压机    Machine tools - Safety - Hydraulic presses
▪    BS EN 773-1999    液压压力排气管、排水管和污水管道中使用部件的一般要求    General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
▪    BS EN 804-1995    塑料管道系统.压力管道溶剂胶粘接头的注射模塑承口连接管件.短期内部液压压力的试验方法    Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
▪    BS EN 81-2-1998    升降机的建造和安装的安全规则.液压梯    Safety rules for the construction and installation of lifts - Hydraulic lifts
▪    BS EN 81-3-2001    电梯的建造和安装的安全规则.电动和液压饲服电梯    Safety rules for the construction and installation of lifts - Electric and hydraulic service lifts
▪    BS EN 853-1997    软管和软管组件.金属丝编织加强的液压用类型.规范    Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
▪    BS EN 854-1997    橡胶软管及管组件.纺织物增强的液压用类型.规范    Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
▪    BS EN 855-1997    塑料软管和软管组件.热塑料纺织物增强的液压用类型.规范    Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification
▪    BS EN 856-1997    橡胶软管和软管组件.橡胶包覆螺旋形金属丝增强的液压用类型.规范    Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
▪    BS EN 857-1997    软管及软管部件.液压用的金属线编带增强的抗挤压类型.规范    Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
▪    BS EN 982-1996    机械的安全性.流体动力系统及其元件的安全性要求.液压传动装置    Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
▪    BS EN ISO 10592-1995    小艇.液压操舵系统    Small craft - Hydraulic steering systems
▪    BS EN ISO 12922-1999    润滑油、工业油及有关产品(L级).H族(液压系统).HFAE、HFAS、HFB、HFC、HFDR和HFDU类别规范    Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
▪    BS EN ISO 13938-1-1999    纺织品.纤维胀破特性.胀破强度和胀破膨胀测定的液压方法    Textiles - Bursting properties of fabrics - Hydraulic method for determination of bursting strength and bursting distension
▪    BS EN ISO 1402-1997    橡胶和塑料软管及软管组件.液压静力试验    Rubber and plastics hoses and hose assemblies - Hydrostatic testing
▪    BS EN ISO 19879-2006    液压和一般用途金属管连接件.液压传动连接件的试验方法    Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
▪    BS EN ISO 20763-2004    石油和相关产品.液压液耐磨性的测定.叶轮泵法    Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
▪    BS EN ISO 4263-2-2003    石油及其产品.抑制油和流体的老化性的测定.TOST试验.HFC类液压液的试验程序    Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for category HFC hydraulic fluids
▪    BS EN ISO 4263-3-2006    石油及其产品.抑制油和流体的老化性的测定.TOST试验.合成液压液的无水程序    Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Anhydrous procedure for synthetic hydraulic fluids
▪    BS EN ISO 4404-2-2003    石油和相关产品.难燃液压液抗腐蚀性的测定.不含水液体    Petroleum and related products - Determination of the corrosion resistance fire-resistant hydraulic fluids - Non-aqueous fluids
▪    BS EN ISO 5198-1999    离心式混流轴向泵.液压性能试验规程.精密级    Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class
▪    BS EN ISO 6743-4-1999    润滑剂、工业用润滑油和有关产品(L类).分类.H族(液压系统)    Lubricants, industrial oils and related products (class L) - Classification - Family H (hydraulic systems)
▪    BS EN ISO 6803-1996    橡胶或塑料软管和软管组件.非弯曲液压脉冲试验    Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
▪    BS EN ISO 8032-1998    橡胶和塑料软管组件.液压脉冲弯曲试验(半Ω 型试验)    Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test)
▪    BS EN ISO 8434-1-1995    液压传动和一般用金属导管的连接.24度压合接头    Metallic tube connections for fluid power and general use - 24 ° compression fittings
▪    BS EN ISO 8434-4-1997    液压及通用金属管连接件.有O形面焊接管接头的24度锥形连接件    Metallic tube connections for fluid power and general use - 24 ° cone connectors with O-ring weld-on nipples
▪    BS EN ISO 9080-2003    塑料管道和导管系统.用外推法测定热塑塑料管道的长期静液压强度    Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
▪    BS EN ISO 9906-2000    涡轮式泵.液压性能验收试验.1和2级    Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2
▪    BS EN ISO 9974-1-2000    普通和液压传动用联接件.用ISO 261弹性螺纹或金属与金属间密封的气门和双头螺栓端头.螺纹气门    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Threaded ports
▪    BS EN ISO 9974-2-2000    普通和液压传动用联接件.用ISO 261弹性螺纹或金属与金属间密封的气门和双头螺栓端头.(E型)弹性密封的双头螺    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with elastomeric sealing (type E)
▪    BS EN ISO 9974-3-2000    普通和液压用联接结件.用ISO 261螺纹的弹性或金属与金属间密封的气门和双头螺栓端头.(B型)金属与金属间密封    Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with metal-to-metal sealing (type B)
▪    BS IEC 60092-204-2001    船舶电气设施.系统设计.电动和电动液压操舵装置    Electrical installation in ships - System design - Electric and electrohydraulic steering gear
▪    BS ISO 10100-2001    液压传动.液压缸.验收试验    Hydraulic fluid power - Cylinders - Acceptance tests
▪    BS ISO 10372-1998    液压流体动力.4孔和5孔伺服阀.安装面    Hydraulic fluid power - Four-and five-port servovalves - Mounting surfaces
▪    BS ISO 10627-2-1996    农用液压式喷雾器.数据表.第2部分:部件相关的技术规范    Hydraulic agricultural sprayers - Data sheets - Technical specifications related to components
▪    BS ISO 10762-1998    液压流体动力.汽缸安装尺寸.10Mpa(100bar)系列    Hydraulic fluid power - Cylinder mounting dimensions - 10 MPa (100 bar) series
▪    BS ISO 10766-2006    液压动力.汽缸.活塞及连杆用矩形截面轴承环沟槽尺寸    Hydraulic fluid power - Cylinders - Housing dimensions forrectangular-sect bearing rings for pistons and rods
▪    BS ISO 10767-1-1996    液压流体动力.对系统和部件产生压力波动级的测定.第1部分:泵精度法    Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Precision method for pumps
▪    BS ISO 10767-2-1999    液压传动.系统和元件中产生压力波动值的测定.泵的简化方法    Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps
▪    BS ISO 10767-3-2000    液压传动.系统和元件产生压力波动值的测定.马达用方法    Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Method for motors
▪    BS ISO 10770-1-1998    液压流体动力.电动调节液压控制阀.第1部分:四向流动控制阀的试验方法    Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves
▪    BS ISO 10770-2-1998    液压流体动力.电动调节液压控制阀.第2部分:三向流动控制阀的试验方法    Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves
▪    BS ISO 10771-1-2002    液压流体动力.金属压力容器外壳的疲劳压力试验.试验方法    Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Test method
▪    BS ISO 10945-2000    液压传动.充气蓄能器.气口的尺寸    Hydraulic fluid power - Gas-loaded accumulators - Dimensions of gas ports
▪    BS ISO 10946-1999    液压传动.隔离式充气蓄能器.优先选择的液压油    Hydraulic fluid power - Gas-loaded accumulators with separator - Selection of preferred hydraulic ports
▪    BS ISO 11158-1998    润滑剂、工业油和相关产品(L类).H系列(液压系统).HH、HL、HM、HR、HV和HG类别规范    Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HR, HV and HG
▪    BS ISO 11170-2004    液压传动.滤芯.性能特性检定的试验序列    Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics
▪    BS ISO 11171-2000    液压传动.液体自动粒子计数器的校正    Hydraulic fluid power - Calibration of automatic particle counters for liquids
▪    BS ISO 11237-1-2005    橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.用于油基液体    Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Oil-based fluid applications
▪    BS ISO 11500-1997    液压流体动力.采用光消失原理自动计数法对微粒子不纯度的测定    Hydraulic fluid power - Determination of particulate contamination by automatic counting using the light extinction principle
▪    BS ISO 11599-1998    含有包埋放射废物的液压粘合剂气孔和透气性的测定    Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
▪    BS ISO 11943-1999    液压流体力学.液体在线上自动流水颗粒计数系统.校验和批准方法    Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation
▪    BS ISO 12151-1-1999    液压流体力学和一般用途的连接件.软管配件.有ISO 8434-3 O型环对接密封端的软管组件    Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-3 O-ring face-seal ends
▪    BS ISO 12151-2-2003    液压传动和通用联接件.软管接头.带ISO 8434-1和ISO 8434-4 O形圈24锥形末端的软管接头    Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ° cone connector ends with O-rings
▪    BS ISO 12151-3-1999    液压流体力学和一般应用的连接件.软管配件.带ISO 6162法兰端的软管配件    Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6162 flange ends
▪    BS ISO 12333-2000    航空航天.定量液压马达.35000KPa系统的一般规范    Aerospace - Constant displacement hydraulic motors - General specifications for 35000 kPa systems
▪    BS ISO 12334-2000    航空航天.液压的压力补偿的变量输送泵.35000KPa系统的一般要求    Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems
▪    BS ISO 12922-1999    润滑油,工业油和相关产品(L级).H族(液压系统).HFA、HFAS、HFB、HFC、HFDR和HFDU类别规范    Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
▪    BS ISO 13486-1-1999    道路车辆.液压制动系统.双扩口管,螺纹孔,外螺纹接头和管座    Road vehicles - Hydraulic braking systems - Double-flare pipes, tapped holes, male fittings and tube seats
▪    BS ISO 13726-1998    液压流体动力.内径为250mm-500mm的16MPa(160bar)紧凑式系列单杆汽缸.附件安装尺寸    Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions
▪    BS ISO 14617-10-2004    图示的图形符号.液压变流器    Graphical symbols for diagrams - Fluid power converters
▪    BS ISO 15086-1-2001    液压流体动力.部件和系统液载噪音特性的测定.导言    Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Hydraulic fluid power - Determination of the fluid borne noise characteristics of components and systems - Introduction
▪    BS ISO 15086-2-2000    液压流体动力.部件和系统液载噪音特性的测定.管道流体声速的测量    Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Measurement of speed of sound in a fluid in a pipe
▪    BS ISO 15171-1-1999    液压和一般用途的连接.诊断用的液压联结器.不用于压力条件下连接的联结器    Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling not for connection under pressure
▪    BS ISO 15171-2-2000    流体动力和通用连接器.诊断用液压联轴器.加压连接用M16×2端头    Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling with M16 x 2 end for connection under pressure
▪    BS ISO 15217-2001    液压流体动力系统和部件.16平方毫米接地电气连接器.特性和要求    Fluid power systems and components - 16mm square electrical connector with earth contact - Characteristics and requirements
▪    BS ISO 15380-2002    润滑剂、工业用油和相关产品(L类).H族(液压系统).HETG, HEPG, HEES 和 HEPR类的规范    Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR
▪    BS ISO 16028-2000    液压流体动力.在20MPa(200巴)到31.5MPa(315巴)的压力下使用平面型速动联轴器.规范    Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications
▪    BS ISO 16656-2004    液压传动.10MPa(100 bar)下使用的缸径在32mm到100mm的单杆、短冲程气缸.安装尺寸    Hydraulic fluid power - Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) - Mounting dimensions
▪    BS ISO 16860-2006    液压传动.过滤器.差压设备试验方法    Hydraulic fluid power - Filters - Test method for differential pressure devices
▪    BS ISO 16873-2002    液压流体动力.压力开关.安装表面    Hydraulic fluid power - Pressure switches - Mounting surfaces
▪    BS ISO 16874-2004    液压传动.歧管及其元件的标识    Hydraulic fluid power - Identification of manifold assemblies and their components
▪    BS ISO 16889-2000    液压流体动力过滤器.过滤器元件过滤性能多路法的评估    Hydraulic fluid power filters - Multi-pass method for evaluating filtration performance of a filter element
▪    BS ISO 16902-1-2003    液压传动.用声强法测定声功率级的试验规程.工程法.泵    Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques - Engineering method - Pumps
▪    BS ISO 17559-2004    液压传动.电控液压泵.性能特征测定的试验方法    Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics
▪    BS ISO 18413-2002    液压流体动力.零部件的清洁度.与污染收集、分析和数据报告相关的检查文件和原则    Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection , analysis and data reporting
▪    BS ISO 20401-2005    气动液压驱动系统.方向控制阀.直径为8mm-12mm的电动圆形连接器的管脚分布规范    Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
▪    BS ISO 20843-2003    石油和相关产品.HFAE、HFAS和HFC类中抗燃液压油pH的测定    Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
▪    BS ISO 2941-1996    液压流体动力.过滤器元件.抗挤压/爆裂性检验    Hydraulic fluid power - Filter elements - Verification of collapse/burst resistance
▪    BS ISO 2942-2004    液压传动.滤芯.结构完整性的验证和第一气泡点的测定    Hydraulic fluid power - Filter elements - Verification of fabrication integrity and determination of the first bubble point
▪    BS ISO 2943-1999    液压传动.滤芯.材料和油液相容性的验证    Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids
▪    BS ISO 2944-2000    液压动力系统和元件.标称压力    Fluid power systems and components - Nominal pressures
▪    BS ISO 3322-1996    流体动力系统和部件.液压缸.标称压力    Fluid power systems and components - Cylinders - Nominal pressures
▪    BS ISO 3601-3-2005    液压流体动力.O型环.质量验收标准    Fluid power systems - O-rings - Quality acceptance criteria
▪    BS ISO 3723-1996    液压流体动力.过滤器元件.端向负荷试验方法    Hydraulic fluid power - Filter elements - Method for end load test
▪    BS ISO 3724-1996    液压流体动力.过滤器元件.流动疲劳特性验证    Hydraulic fluid power - Filter elements - Verification of flow fatigue characteristics
▪    BS ISO 3968-2002    液压传动.过滤器.差压与流量特性关系的评估    Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics
▪    BS ISO 4392-1-2002    液压流体动力.电动机特性的测定.在恒低速和常压下    Hydraulic fluid power - Determination of characteristics of motors - At constant low speed and constant pressure
▪    BS ISO 4392-2-2002    液压流体动力.电动机特性的测定.稳定性    Hydraulic fluid power - Determination of characteristics of motors - Startability
▪    BS ISO 4401-2005    液压流体动力.四孔定向控制阀.安装面    Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
▪    BS ISO 4404-1-2002    石油和相关产品.耐火液压流体的耐腐蚀性能的测定.含水流体    Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Water-containing fluids
▪    BS ISO 4404-1998    石油和相关产品.液压系统用含水防火液体的耐腐蚀性测定    Petroleum and related products - Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems
▪    BS ISO 4406-2000    液压传动.油液.固体颗粒污染等级代码法    Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
▪    BS ISO 4407-2002    液压流体动力.流体污染.用光学显微镜计数法测定粒状物污染    Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
▪    BS ISO 4413-1998    液压流体动力.有关系统的一般规则    Hydraulic fluid power - General rules relating to systems
▪    BS ISO 4925-2005    道路车辆.液压系统用非石油基制动液规范    Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems
▪    BS ISO 4927-2005    道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度120℃)    Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.)
▪    BS ISO 5596-2000    液压传动.隔离式充气蓄能器.压力、容积范围和特性量    Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities
▪    BS ISO 5781-2000    液压传动.减压阀、顺序阀、卸荷阀、节流阀和单向阀.安装面    Hydraulic fluid power - Pressure reducing valves, sequence valves , unloading valves, throttle valves and check valves - Mounting surfaces
▪    BS ISO 6020-1-1998    液压流体动力.16MPa(160bar)系列单杆汽缸安装尺寸.中型系列    Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Medium series
▪    BS ISO 6020-2-2006    液压流体动力.16MPa(160bar)系列单杆汽缸用安装尺寸.小型系列    Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series
▪    BS ISO 6020-3-1995    液压流体动力.16MPa(160bar)系列单杆汽缸用安装尺寸.内径从250mm到500mm的紧凑式系列    Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series with bores from 250 mm to 500 mm
▪    BS ISO 6022-2006    液压传动.25M Pa (250巴)系列单杆汽缸安装尺寸    Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series
▪    BS ISO 6072-2002    液压流体动力.流体和标准合成橡胶材料间的兼容性    Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials
▪    BS ISO 6099-2001    流体动力系统和元件.液压缸.装配尺寸和装配类型的识别代码    Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types
▪    BS ISO 6117-2005    道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度100℃)    Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100?C max.)
▪    BS ISO 6162-1-2002    液压传动.带对开夹或整体式法兰夹的法兰接头以及公制或英制螺钉.在压力为3,5MPa(35bar)至35MPa(350bar),DN1    Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
▪    BS ISO 6162-2-2002    液压传动.带对开夹或整体式法兰夹的法兰接头以及公制或英制螺钉.在压力为35MPa(350bar)至40MPa(400bar),DN1    Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
▪    BS ISO 6263-1997    液压流体动力.补偿式流量控制阀.安装面    Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
▪    BS ISO 6264-1998    液压流体动力.减压阀.安装面    Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
▪    BS ISO 6547-2002    液压传动.缸筒.装有支撑环的活塞密封沟槽.尺寸和公差    Hydraulic fluid power - Cylinders - Piston seal housings incorporating bearing rings - Dimensions and tolerances
▪    BS ISO 6605-2003    液压传动.软管及软管组件.试验方法    Hydraulic fluid power - Hoses and hose assemblies - Test methods
▪    BS ISO 6743-4-1999    润滑剂、工业用润滑油和有关产品(L类).分类.第4部分:H族(液压系统)    Lubricants, industrial oils and related products (class L) - Classification - Family H (hydraulic systems)
▪    BS ISO 6805-1995    井下采矿用橡胶软管和软管组件.采煤用钢丝加筋液压型.规范    Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification
▪    BS ISO 6981-1996    液压流体动力.汽缸.杆端孔.安装尺寸    Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting dimensions
▪    BS ISO 7181-1997    液压流体动力.汽缸.汽缸内径和连杆截面比    Hydraulic fluid power - Cylinders - Bore and rod area ratios
▪    BS ISO 7241-2-2000    液压传动.快换接头.试验方法    Hydraulic fluid power - Quick-action couplings - Test methods
▪    BS ISO 7314-2003    航空航天.液压系统.金属软管组件    Aerospace - Fluid systems - Metal hose assemblies
▪    BS ISO 7425-1-2002    液压流体动力.弹性体塑料面密封件的汽缸.尺寸和公差.活塞密封汽缸    Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Piston seal housings
▪    BS ISO 7425-2-2002    液压流体动力.弹性体塑料面密封件的汽缸.尺寸和公差.活塞杆密封汽缸    Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings
▪    BS ISO 7789-1998    液压流体动力.二孔、三孔和四孔拧入式卡盘阀.孔腔    Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities
▪    BS ISO 7790-1998    液压流体动力.规格为02、03和05型的四孔模数叠阀和四孔定向控制阀.夹紧尺寸    Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions
▪    BS ISO 8131-1996    液压流体动力.16MPa(160 bar)紧凑式系列单杆汽缸.公差    Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Tolerances
▪    BS ISO 8132-2006    液压传动.单杆缸、16 MPa (160 bar)中型系列和25 MPa (250 bar)系列.附件安装尺寸    Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessories
▪    BS ISO 8133-2006    液压传动.单杆缸、16 MPa(160 bar)小型系列.附件安装尺寸    Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Mounting dimensions for accessories
▪    BS ISO 8135-1999    液压传动.160巴(16MPa)和250巴(25MPa)中型系列的单杆液压缸.公差    Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Tolerances
▪    BS ISO 8137-1997    液压流体动力.250巴(25MPa)系列单杆汽缸.油口尺寸    Hydraulic fluid power - Single rod cylinders, 250 bar (25 MPa) series - Port dimensions
▪    BS ISO 8434-3-2005    用于液压传动和一般用途的金属管接头.O形圈端面密封管接头    Metallic tube connections for fluid power and general use - O-ring face seal connectors
▪    BS ISO/TS 13725-2001    液压动力.液压缸.临界载荷的测定方法    Hydraulic fluid power - Cylinders - Method for determining the buckling load
▪    BS L 117-1975    铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:未经液压试验)(厚度小于10mm)    Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
▪    BS L 118-1975    铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:液压试验)(壁厚度小于10mm)    Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
▪    BS M 55-1984    航空航天用液压管连接件和配件的回转弯曲试验方法    Method for rotary flexure testing of hydraulic tubing joints and fittings for aerospace use
▪    BS M 61-1989    液压系统用“P”形卡箍(环形卡箍()轮廓尺寸规范    Specification for envelope dimensions of "P" clamps (loop clamps) for fluid systems
▪    BS M 62-1987    轴线调准的液压系统管道的夹紧装置的设计和评定试验规范    Specification for design and qualification testing of clamp blocks for fluid system tube lines having axial alignment - Metric series
▪    BS M 65-1987    压力补偿变量液压泵规范    Specification for pressure compensated variable delivery hydraulic pumps
▪    BS M 66-1987    液压系统"Q"形夹(中心安装)尺寸规范    Specification for dimensions of 'Q' clamps (centre-mounted clamps) for fluid systems
▪    BS PAS 32-2-1999    交付使用之前新升降机的检查和测试规范.液压升降机    Specification for examination and test of new lifts before putting into service - Hydraulic lifts
▪    BS SP 115 to 117-1956    航空用液压表面止动型润滑脂嘴规范    Specifications for hydraulic surface-check type lubricating nipples for aircraft
▪    BS T 72-T 73-1977    液压用18/10铬-镍耐腐蚀钢管规范(铌/钛稳定;550MPa)    Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa)
▪    DD 225-1995    采用旋转磁盘摆动销对液压流体抗磨损性能的测定    Determination of anti-wear properties of hydraulic fluids using the oscillating pin on rotating disc method
▪    DD ENV 13282-2000    液压道路粘合剂.组分、规范和符合性标准    Hydraulic road binders. Composition, specifications and conformity criteria

▪    JIS A8321-2001    土方机械.降低液压挖土机和反铲装载机声震的控制装置.要求和试验    Earth-moving machinery -- Hydraulic excavator and backhoe loader boom-lowering control device -- Requirements and tests
▪        土工機械　―　油圧ショベル又はバックホウローダのブーム降下制御装置　―　性能基準及び試験方法    
▪    JIS A8340-4-2004    土方机械.安全.第4部分:液压挖土机的要求    Earth-moving machinery -- Safety -- Part 4: Requirements for hydraulic excavators
▪        土工機械－安全－第４部：油圧ショベルの要求事項    
▪    JIS A8403-1-1996    运土机械.液压挖掘机.第1部分:术语和商业要求    Earth-moving machinery -- Hydraulic excavators -- Part 1: Terminology and commercial specifications
▪        土工機械　―　油圧ショベル　―　第１部：用語及び仕様項目    
▪    JIS A8403-2-1998    运土机械.液压挖掘机.第2部分:规范活页的标准格式    Earth-moving machinery -- Hydraulic excavators -- Part 2: Standard form of specification sheets
▪        土工機械　―　油圧ショベル　―　第２部：仕様書様式    
▪    JIS A8403-3-1998    运土机械.液压挖掘机.第3部分:测试方法    Earth-moving machinery -- Hydraulic excavators -- Part 3: Testing methods
▪        土工機械　―　油圧ショベル　―　第３部：性能試験方法    
▪    JIS A8403-4-1998    运土机械.液压挖掘机.第4部分:铲斗的额定容积    Earth-moving machinery -- Hydraulic excavators -- Part 4: Bucket volumetric ratings
▪        土工機械　―　油圧ショベル　―　第４部：バケットの定格容量    
▪    JIS A8403-5-1998    运土机械.液压挖掘机.第5部分:机械过加载的测量方法    Earth-moving machinery -- Hydraulic excavators -- Part 5: Method of measuring tool forces
▪        土工機械　―　油圧ショベル　―　第５部：掘削力測定方法    
▪    JIS A8922-2001    土方机械.液压挖土机.操作人员安全保护装置的实验室试验和性能要求    Earth-moving machinery -- Hydraulic excavators -- Laboratory tests and performance requirements for operator protective guards
▪        土工機械　―　油圧ショベル　―　運転員保護ガードの試験及び性能要求事項    
▪    JIS B0142-1994    液压和气动技术的术语汇编    Glossary of terms for oil hydraulics and pneumatics
▪        油圧及び空気圧用語    
▪    JIS B2291-1994    21 MPA液压用平焊管法兰    21 MPa slip-on welding pipe flanges for hydraulic use
▪        油圧用２１ＭＰａ管フランジ    
▪    JIS B2292-1-2005    液压传动.容积式泵和发动机的安装盘与轴端的尺寸和识别代码.第1部分:用米制单位表示的英寸系列    Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 1: Inch series shown in metric units
▪        油圧－容積式ポンプ及びモータ－取付フランジ及び軸端の寸法並びに表示記号－第１部：メートル単位で表示するインチ系列    
▪    JIS B2292-2-2005    液压传动.容积式泵和发动机的安装盘与轴端的尺寸和识别代码.第2部分:米制系列    Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series
▪        油圧－容積式ポンプ及びモータ－取付フランジ及び軸端の寸法並びに表示記号－第２部：メートル系列    
▪    JIS B2351-5-2000    液力和一般用途金属管接头.第5部分.螺纹液压动力接头的试验方法    Metallic tube connections for fluid power and general use -- Part 5: Test methods for threaded hydraulic fluid power connections
▪        油圧・空気圧用及び一般用途用金属製管継手　―　第５部：油圧用ねじ継手の試験方法    
▪    JIS B2409-2002    液压流体动力.密封装置.油压往复设备的密封件性能评定的标准试验方法    Hydraulic fluid power -- Sealing devices -- Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
▪    JIS B6403-1994    液压机.准确度的测试    Hydraulic presses -- Testing of the accuracy
▪        液圧プレス　―　精度検査    
▪    JIS B8038-1998    往复式液压气缸用活塞环    Piston rings for reciprocating hydraulic cylinders
▪        往復動油圧シリンダ用ピストンリング    
▪    JIS B8301-2000    旋转动力泵.液压性能验收试验.1级和2级    Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1 and 2
▪        遠心ポンプ，斜流ポンプ及び軸流ポンプ　―　試験方法    
▪    JIS B8301 ERRATUM 1-2001    旋转动力泵.液压性能验收试验.1级和2级(勘误1)    Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1 and 2 (Erratum 1)
▪    JIS B8306-2002    离心油泵.用油作为测试液体的液压性能验收试验    Centrifugal type oil pumps -- Hydraulic performance acceptance tests by oil as testing liquid
▪        油用遠心ポンプ　―　油を用いる試験方法    
▪    JIS B8311-2002    往复式泵.液压性能验收试验    Reciprocating pumps -- Hydraulic performance acceptance tests
▪        往復ポンプ　―　試験方法    
▪    JIS B8312-2002    齿轮泵和螺旋泵.液压性能验收试验    Gear pumps and screw pumps -- Hydraulic performance acceptance tests
▪        歯車ポンプ及びねじポンプ　―　試験方法    
▪    JIS B8348-2002    液压流体动力.泵和电动机.试验方法    Hydraulic fluid power -- Pumps and motors -- Test methods
▪        油圧　―　ポンプ及びモータ　―　試験方法    
▪    JIS B8349-2-2004    液压传动.系统和组件中产生的压力波动级别的测定.第2部分:泵的简化法    Hydraulic fluid power -- Determination of pressure ripple levels generated in systems and components -- Part 2: Simplified method for pumps
▪        油圧－システム及び機器から発生する圧力脈動レベルの測定方法－第２部：ポンプにおける簡易測定方法    
▪    JIS B8350-1-2003    液压流体动力.气载噪声级测定的试验规程.第1部分:泵    Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps
▪        油圧　―　騒音レベル測定方法　―　第１部：ポンプ    
▪    JIS B8350-2-2003    液压流体动力.气载噪声级测定的试验规程.第2部分:马达    Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 2: Motors
▪        油圧　―　騒音レベル測定方法　―　第２部：モータ    
▪    JIS B8350-3-2003    液压流体动力.气载噪声级测定的试验规程.第3部分:泵.采用平行六面体麦克风排列法    Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 3: Pumps -- Method using a parallelepiped microphone array
▪        油圧　―　騒音レベル測定方法　―　第３部：ポンプ　―　平行六面体配置のマイクロホンによる測定    
▪    JIS B8351-1999    液压叶片泵    Vane pumps for hydraulic use
▪        油圧用ベーンポンプ(廃止)    
▪    JIS B8352-1999    液压齿轮泵    Gear pumps for hydraulic use
▪        油圧用歯車ポンプ(廃止)    
▪    JIS B8355-2009    液压流体动力.装配型四通电磁操纵阀    Hydraulic fluid power -- Subplate type solenoid operated four-port valves
▪        油圧―サブプレート取付形４ポート電磁切換弁    
▪    JIS B8356-1-2000    液压动力.过滤器.过滤器性能的评价.第1部分:过滤器元件.功能特性的检验程序    Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 1: Filter elements -- Procedure for verifying performance characteristics
▪        油圧用フィルタ性能評価方法　―　第１部：フィルタエレメントの性能確認手順    
▪    JIS B8356-2-2000    液压动力.过滤器.过滤器性能的评价.第2部分:过滤器元件.制造完整性的检定和首次起泡点的测定    Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 2: Filter elements -- Verification of fabrication integrity and determination of the first bubble point
▪        油圧用フィルタ性能評価方法　―　第２部：フィルタエレメントの組立完全性試験及びファーストバブルポイントの測定    
▪    JIS B8356-3-2000    液压动力.过滤器.过滤器性能的评价.第3部分:过滤器元件.耐破坏/耐爆裂性检定    Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 3: Filter elements -- Verification of collapse/burst resistance
▪        油圧用フィルタ性能評価方法　―　第３部：フィルタエレメントのつぶれ又は破裂試験    
▪    JIS B8356-4-2000    液压动力.过滤器.过滤器性能的评价.第4部分:过滤器元件.材料与液体相容性的检定    Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 4: Filter elements -- Verification of material compatibility with fluid
▪        油圧用フィルタ性能評価方法　―　第４部：フィルタエレメントの材料の作動油適合性試験    
▪    JIS B8356-5-2000    液压动力.过滤器.过滤器性能的评价.第5部分:过滤器元件.端向负荷试验方法    Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 5: Filter elements -- Method for end load test
▪        油圧用フィルタ性能評価方法　―　第５部：フィルタエレメントの端末荷重試験    
▪    JIS B8356-6-2000    液压动力.过滤器.过滤器性能的评价.第6部分:过滤器元件.流动疲劳特性的检定    Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 6: Filter elements -- Verification of flow fatigue characteristics
▪        油圧用フィルタ性能評価方法　―　第６部：フィルタエレメントの流れ疲労特性試験    
▪    JIS B8356-7-2000    液压动力.过滤器.过滤器性能的评价.第7部分:过滤器.压降与流动特性关系的评价    Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 7: Filters -- Evaluation of pressure drop versus flow characteristics
▪        油圧用フィルタ性能評価方法―第７部：差圧―流量特性試験    
▪    JIS B8356-8-2002    液压流体动力过滤器.评定过滤元件过滤性能的多通路试验方法    Hydraulic fluid power filters -- Multi-pass method for evaluating filtration performance of a filter element
▪        油圧用フィルタ性能評価方法　―　第８部：フィルタエレメントのろ過性能試験（マルチパステスト法）    
▪    JIS B8356-9-2000    液压动力.过滤器.过滤器性能的评价.第9部分:过滤器.对要求的说明    Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 9: Filters -- Statement of requirements
▪        油圧用フィルタ性能評価方法　―　第９部：フィルタの要求性能一覧    
▪    JIS B8357-2000    液压动力.带压力补偿的流量控制阀.安装面    Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces
▪        油圧用圧力補償付流量調整弁　―　取付面及び取付寸法    
▪    JIS B8358-2004    液压传动.气囊式蓄能器.试验方法    Hydraulic fluid power -- Bladder type accumulators -- Test methods
▪        油圧－ブラダ形アキュムレータの試験方法    
▪    JIS B8360-2000    液压用钢丝增强的橡胶软管组件    Wire reinforced rubber hose assemblies for hydraulic use
▪        液圧用鋼線補強ゴムホースアセンブリ    
▪    JIS B8361-2000    液压流体动力.与系统有关的一般规则    Hydraulic fluid power -- General rules relating to systems
▪        油圧システム通則    
▪    JIS B8362-2000    液压用织物增强的热塑性塑料软管组件    Textile reinforced thermoplastic hose assemblies for hydraulic use
▪        液圧用繊維補強樹脂ホースアセンブリ    
▪    JIS B8363-2000    液压软管组件的端部配件及接头    End fittings and adapters for hydraulic hose assemblies
▪        液圧用ホースアセンブリ継手金具及び附属金具    
▪    JIS B8364-2000    液压用织物增强的橡胶软管组件    Textile reinforced rubber hose assemblies for hydraulic use
▪        液圧用繊維補強ゴムホースアセンブリ    
▪    JIS B8366-1-2000    流体动力系统和元件.液压缸.元件和识别代码.第1部分:缸径和活塞杆直径.米制系列    Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 1: Cylinder bores and piston rod diameters -- Metric series
▪        油圧・空気圧システム及び機器　―　シリンダ　―　構成要素及び識別記号　―　第１部：シリンダ内径及びピストンロッド径    
▪    JIS B8366-2-2000    流体动力系统和元件.液压缸.元件和识别码.第2部分:标称压力    Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 2: Nominal pressures
▪        油圧・空気圧システム及び機器　―　シリンダ　―　構成要素及び識別記号　―　第２部：呼び圧力    
▪    JIS B8366-3-2000    流体动力系统和元件.液压缸.元件和识别码.第3部分:活塞冲程的基本系列    Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 3: Basic series of piston strokes
▪        油圧・空気圧システム及び機器　―　シリンダ　―　構成要素及び識別記号　―　第３部：標準ピストンストローク    
▪    JIS B8366-4-2000    流体动力系统和元件.液压缸.元件和识别码.第4部分:活塞杆螺纹尺寸和类型    Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 4: Piston rod thread dimension and types
▪        油圧・空気圧システム及び機器　―　シリンダ　―　構成要素及び識別記号　―　第４部：ピストンロッド先端ねじ寸法及び形状    
▪    JIS B8366-5-2000    流体动力系统和元件.液压缸.元件和识别码.第5部分:识别码    Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 5: Identification code
▪        油圧・空気圧システム及び機器―シリンダ―構成要素及び識別記号―第５部：識別記号    
▪    JIS B8366-6-2001    流体动力系统及元件.液压缸.元件和识别代码.第6部分:液压流体动力.单杆液压缸、16MPa和25MPa圆形缸盖、焊接    Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 6: Hydraulic fluid power -- Single rod cylinders, 16 MPa and 25 MPa round cover, welded or threaded flange type mounting dimensions -- Tolerances
▪        油圧・空気圧システム及び機器　―　シリンダ　―　構成要素及び識別記号　―　第６部：片ロッドシリンダ，１６ＭＰａ用及び２５ＭＰａ用丸カバー，フランジ溶接又はねじ込み形取付寸法　―　許容差    
▪    JIS B8366-7-2001    液压气动系统及元件.液压缸.元件和识别代码.第7部分:液压流体动力.单杆液压缸、16MPa方形缸盖、系杆固定型    Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 7: Hydraulic fluid power -- Single rod cylinders, 16 MPa square cover, tie rod tightened type mounting dimensions -- Port dimensions
▪        油圧・空気圧システム及び機器　―　シリンダ　―　構成要素及び識別記号　―　第７部：片ロッドシリンダ，１６ＭＰａ用角カバー，タイロッド締付形取付寸法　―　ポート径    
▪    JIS B8367-1-2009    液压气缸的安装尺寸.第1部分:单杆.16 MPa系列、焊接或螺纹法兰的圆盖型液压气缸(气缸内径25 mm 至 500 mm)    Hydraulic fluid power -- Mounting dimensions for cylinders -- Part 1: Single rod, 16 MPa series -- Round cover types with welded or threaded flange (Bores from 25 mm to 500 mm)
▪        油圧シリンダ取付寸法―第１部：片ロッド―１６ＭＰａシリーズ―丸カバー形―溶接フランジ式及びねじ込みフランジ式（内径２５ｍｍ～５００ｍｍ）    
▪    JIS B8367-2-2009    液压气缸的安装尺寸.第2部分:单杆.16 MPa系列、方盖、系杆密封型液压气缸(气缸内径25 mm 至 200 mm)    Hydraulic fluid power -- Mounting dimensions for cylinders -- Part 2: Single rod, 16 MPa series -- Square cover and tie rod tightend type (Bores from 25 mm to 200 mm)
▪        油圧シリンダ取付寸法―第２部：片ロッド―１６ＭＰａシリーズ―角カバー形―タイロッド締付式（内径２５ｍｍ～２００ｍｍ）    
▪    JIS B8367-3-2009    液压气缸的安装尺寸.第3部分:单杆.16 MPa系列、方盖、系杆密封型液压气缸(气缸内径250 mm 至 500 mm)    Hydraulic fluid power -- Mounting dimensions for cylinders -- Part 3: Single rod, 16 MPa series -- Square cover and tie rod tightend type (Bores from 250 mm to 500 mm)
▪        油圧シリンダ取付寸法―第３部：片ロッド―１６ＭＰａシリーズ―角カバー形―タイロッド締付式（内径２５０ｍｍ～５００ｍｍ）    
▪    JIS B8367-4-2008    液压气缸的安装尺寸.第4部分:单杆.25 MPa系列、焊接或螺纹法兰的圆盖型液压气缸(气缸内径50 mm 至 500 mm)    Mounting dimensions for hydraulic cylinders -- Part 4: Single rod -- 25 MPa series, round cover types with welded or threaded flange (Bores from 50 mm to 500 mm)
▪        油圧シリンダ取付寸法―第４部：片ロッド―２５ＭＰａシリーズ―丸カバー形―溶接又はねじ込みフランジ式（内径５０ｍｍから３２０ｍｍまで）    
▪    JIS B8367-5-2009    液压气缸的安装尺寸.第5部分:单杆.10 MPa系列、方盖、系杆密封型液压气缸(汽缸内径40 mm 至 200 mm)    Hydraulic fluid power -- Mounting dimensions for cylinders -- Part 5: Single rod, 10 MPa series -- Square cover and tie rod tightend type (Bores from 40 mm to 200 mm)
▪        油圧シリンダ取付寸法―第５部：片ロッド―１０ＭＰａシリーズ―角カバー形―タイロッド締付式（内径４０ｍｍ～２００ｍｍ）    
▪    JIS B8367-6-2008    液压气缸的安装尺寸.第6部分:单杆.10 MPa系列、空间窄小型液压气缸(汽缸内径32 mm 至 100 mm)    Mounting dimensions for hydraulic cylinders -- Part 6: Single rod -- 10 MPa series space saving type (Bores from 32 mm to 100 mm)
▪        油圧シリンダ取付寸法―第６部：片ロッド―１０ＭＰａシリーズ―薄形（内径３２ｍｍから１００ｍｍまで）    
▪    JIS B8368-1-2002    气压缸的安装尺寸.第1部分:单杆.带固定安装装置的1 MPa系列、方盖、系杆密封型液压气缸(汽缸内径32 mm 至 2    Mounting dimensions for pneumatic cylinders -- Part 1: Single rod -- 1 MPa series, square cover and tie rod tightend type with fixed mounting devices (Bores from 32 mm to 250 mm)
▪        空気圧シリンダ取付寸法　―　第１部：片ロッド　―　１ＭＰａシリーズ，角カバー形・タイロッド締付（取付金具固定）式（内径３２ｍｍから２５０ｍｍまで）    
▪    JIS B8368-2-2002    气压缸的安装尺寸.第2部分:单杆.带可分离安装装置的1 MPa系列、方盖、系杆密封型液压气缸(汽缸内径32 mm 至    Mounting dimensions for pneumatic cylinders -- Part 2: Single rod -- 1 MPa series, square cover and tie rod tightend type with detachable mounting devices (Bores from 32 mm to 320 mm)
▪        空気圧シリンダ取付寸法　―　第２部：片ロッド　―　１ＭＰａシリーズ，角カバー形・タイロッド締付（取付金具分離）式（内径３２ｍｍから３２０ｍｍまで）    
▪    JIS B8368-3-2002    气压缸的安装尺寸.第3部分:单杆.带固定和可分离安装装置型的1 MPa系列、小缸径液压气缸( 汽缸内径8 mm 至 2    Mounting dimensions for pneumatic cylinders -- Part 3: Single rod -- 1 MPa series, small bore with fixed and detachable mounting device type (Bores from 8 mm to 25 mm)
▪        空気圧シリンダ取付寸法　―　第３部：片ロッド　―　１ＭＰａシリーズ，小内径（取付金具固定又は分離）形（内径８ｍｍから２５ｍｍまで）    
▪    JIS B8368-4-2002    气压缸的安装尺寸.第4部分:单杆.1 MPa系列、节省空间型液压气缸(汽缸内径20 mm 至 100 mm)    Mounting dimensions for pneumatic cylinders -- Part 4: Single rod -- 1 MPa series, space saving cylinders (Bores from 20 mm to 100 mm)
▪        空気圧シリンダ取付寸法　―　第４部：片ロッド　―　１ＭＰａシリーズ，薄形（内径２０ｍｍから１００ｍｍまで）    
▪    JIS B8372-1-2003    液压流体动力.压缩空气压力调节器和过滤调节器.第1部分:厂商资料和产品生产要求应包含的主要特性    Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-making requirements
▪        空気圧　―　空気圧用減圧弁及びフィルタ付減圧弁　―　第１部：供給者の文書に表示する主要特性及び製品表示要求事項    
▪    JIS B8375-1-2000    气动液压动力.五阀口方向控制阀.第1部分:无电气连器的安装界面    Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surface without electrical connector
▪        空気圧用５ポート方向制御弁―第１部：電気コネクタなしインタフェース取付面    
▪    JIS B8375-2-2000    气动液压动力.五阀口方向控制阀.第2部分:带任选电气连接器的安装界面    Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surface with optional electrical connector
▪        空気圧用５ポート方向制御弁―第２部：電気コネクタ付きインタフェース取付面    
▪    JIS B8375-3-2000    气动液压动力.五阀口方向控制阀.第3部分:阀功能传送代码系统    Pneumatic fluid power -- Five-port directional control valves -- Part 3: Code system for communication of valve functions
▪        空気圧用５ポート方向制御弁　―　第３部：弁機能伝達用コード体系    
▪    JIS B8377-1-2002    液压动力系统和部件.气缸的检验和试验.第1部分:气压缸的验收试验    Fluid power systems and components -- Inspection and test of cylinders -- Part 1: Acceptance tests for pneumatic cylinders
▪        油圧・空気圧システム及び機器　―　シリンダの試験・検査　―　第１部：空気圧シリンダ受渡検査    
▪    JIS B8377-2-2002    流体动力系统和部件.气缸的检验和试验.第2部分:液压气缸的验收试验    Fluid power systems and components -- Inspection and test of cylinders -- Part 2: Acceptance tests for hydraulic cylinders
▪        油圧・空気圧システム及び機器　―　シリンダの試験・検査　―　第２部：油圧シリンダ受渡検査    
▪    JIS B8382-2000    液压流体动力.无源活塞置换泵和马达.推导容量的测定    Hydraulic fluid power -- Positive displacement pumps and motors -- Determination of derived capacity
▪        油圧　―　容積式ポンプ・モータ　―　実容量の決定方法    
▪    JIS B8383-2000    液压流体动力.泵和马达.几何位移量    Hydraulic fluid power -- Pumps and motors -- Geometric displacements
▪        油圧　―　ポンプ及びモータ　―　押しのけ容積    
▪    JIS B8384-2000    液压动力.正排量泵、电机和整体传动装置.稳态性能的测定    Hydraulic fluid power -- Positive displacement pumps, motors and integral transmissions -- Determination of steady-state performance
▪        油圧　―　容積式ポンプ・モータ及び一体形トランスミッション　―　定常状態における性能測定    
▪    JIS B8385-2000    液压动力.泵、电机和整体传动装置.参数定义和字母符号    Hydraulic fluid power -- Pumps, motors and integral transmissions -- Parameter definitions and letter symbols
▪        油圧　―　ポンプ・モータ及び一体形トランスミッション　―　パラメータの定義及び文字記号    
▪    JIS B8386-2000    液压流体动力.阀门.压差/流体特性的测定    Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics
▪        油圧　―　バルブ　―　差圧及び流量特性の測定方法    
▪    JIS B8387-2000    液压流体动力.四孔模块通气阀和四孔方向控制阀.02,03,05尺寸.夹持尺寸    Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions
▪        油圧　―　４ポート形モジュラスタック形弁及び４ポート形方向制御弁　―　サイズ０２，０３及び０５　―　締付寸法    
▪    JIS B8388-2000    液压动力系统和元件.带接地的三针电插头连接器.特性和要求    Fluid power systems and components -- Three-pin electrical plug connectors with earth contact -- Characteristics and requirements
▪        油圧・空気圧システム及び機器　―　アースコンタクト付き３ピン電気プラグコネクタの特性及び要求事項    
▪    JIS B8389-2000    液压动力系统和元件.带接地的两针电插头连接器.特性和要求    Fluid power systems and components -- Two-pin electrical plug connectors with earth contact -- Characteristics and requirements
▪        油圧・空気圧システム及び機器　―　アースコンタクト付き２ピン電気プラグコネクタの特性及び要求事項    
▪    JIS B8390-2000    气动液压动力.用可压缩流体的元件.流动速率特性的测定    Pneumatic fluid power -- Components using compressible fluids -- Determination of flow-rate characteristics
▪        空気圧　―　圧縮性流体用機器　―　流量特性の試験方法    
▪    JIS B8394-1-2000    液压动力.弹性体增能用、塑料面密封液压缸.尺寸和公差.第1部分:活塞密封液压缸    Hydraulic fluid power -- Housings for elastomer-energized, plastic-faced seals -- Dimensions and tolerances -- Part 1: Piston seal housings
▪        油圧　―　組合せシール用ハウジング　―　寸法及び許容差　―　第１部：ピストンシール用ハウジング    
▪    JIS B8394-2-2000    液压动力.弹性体增能用、塑料面密封液压缸.尺寸和公差.第2部分:杆密封液压缸    Hydraulic fluid power -- Housings for elastomer-energized, plastic-faced seals -- Dimensions and tolerances -- Part 2: Rod seal housings
▪        油圧　―　組合せシール用ハウジング　―　寸法及び許容差　―　第２部：ロッドシール用ハウジング    
▪    JIS B8397-1-2008    液压流体动力.电动机特性的测定.第1部分:在恒定低速和恒压下进行的测定    Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and at constant pressure
▪        油圧―モータ特性の決定方法―第１部：一定低速及び一定圧力条件    
▪    JIS B8397-2-2008    液压流体动力.电动机特性的测定.第2部分:可起动性    Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability
▪        油圧―モータ特性の決定方法―第２部：起動特性    
▪    JIS B8397-2002    液压流体动力.带分离器的气-液蓄压器.压力和容积的范围及特征数量    Hydraulic fluid power -- Gas-loaded accumulators with separator -- Ranges of pressures and volumes and characteristic quantities
▪        油圧　―　セパレータ付き気体式アキュムレータ　―　圧力及び容積の範囲並びに特性    
▪    JIS B8397-3-2001    液压流体动力.电动机特性的测定.第3部分:在恒定流量和恒定扭矩下进行的测定    Hydraulic fluid power -- Determination of characteristics of motors -- Part 3: At constant flow and at constant torque
▪        油圧　―　モータ特性の決定方法　―　第３部：一定流量及び一定トルク条件    
▪    JIS B8398-2002    液压流体动力.气-液蓄压器.气体口的尺寸    Hydraulic fluid power -- Gas-loaded accumulators -- Dimensions of gas ports
▪        油圧　―　気体式アキュムレータ　―　ガス封入口の寸法    
▪    JIS B8399-2002    液压流体动力.带分离器的气－液蓄压器.优选液压端口的选择    Hydraulic fluid power -- Gas-loaded accumulators with separator -- Selection of preferred hydraulic ports
▪        油圧　―　セパレータ付き気体式アキュムレータ　―　優先される給排油口の選択    
▪    JIS B8404-1-2005    液压传动.气缸.16MPa中型和25MPa系列气缸.附件安装尺寸.第1部分:杆端普通眼    Hydraulic fluid power -- Cylinders -- 16MPa medium and 25MPa series -- Accessory mounting dimensions -- Part 1: Rod end plain eyes
▪        油圧シリンダ附属金具寸法－１６ＭＰａ及び２５ＭＰａシリーズ・丸カバー形－第１部：プレンロッドアイ    
▪    JIS B8404-2-2005    液压传动.气缸.16MPa中型和25MPa系列气缸.附件安装尺寸.第2部分:杆端球形眼    Hydraulic fluid power -- Cylinders -- 16 MPa medium and 25 MPa series -- Accessory mounting dimensions -- Part 2: Rod end spherical eyes
▪        油圧シリンダ附属金具寸法－１６ＭＰａ及び２５ＭＰａシリーズ・丸カバー形－第２部：スフェリカルロッドアイ    
▪    JIS B8404-3-2005    液压传动.气缸.16MPa中型和25MPa系列气缸.附件安装尺寸.第3部分:杆端和支架    Hydraulic fluid power -- Cylinders -- 16MPa medium and 25MPa series -- Accessory mounting dimensions -- Part 3: Rod end and bracket
▪        油圧シリンダ附属金具寸法－１６ＭＰａ及び２５ＭＰａシリーズ・丸カバー形－第３部：ロッドエンド及びブラケット    
▪    JIS B8404-4-2005    液压传动.气缸.带32 mm至200 mm气缸孔的16MPa小型系列.附件安装尺寸.第4部分:杆端和支架    Hydraulic fluid power -- Cylinders -- 16 MPa compact series with bores from 32 mm to 200 mm -- Accessory mounting dimensions -- Part 4: Rod end and bracket
▪        油圧シリンダ附属金具寸法－１６ＭＰａシリーズ・角カバー形（内径３２ｍｍから２００ｍｍまで）－第４部：ロッドエンド及びブラケット    
▪    JIS B8404-5-2005    液压传动.气缸.带32 mm至200 mm的气缸孔的16MPa小型系列.附件安装尺寸.第5部分:杆端    Hydraulic fluid power -- Cylinders -- 16MPa compact series with bores from 250 mm to 500 mm --Accessory mounting dimensions -- Part 5: Rod end
▪        油圧シリンダ附属金具寸法－１６ＭＰａシリーズ・角カバー形（内径２５０ｍｍから５００ｍｍまで）－第５部：ロッドエンド    
▪    JIS B8651-2002    比例电动液压减压阀试验方法    Test methods for electro-hydraulic proportional pressure relief valves
▪        比例電磁式リリーフ弁試験方法    
▪    JIS B8652-2002    电动液压比例安全阀和减压阀的试验方法    Test methods for electro-hydraulic proportional pressure relief valves and electro-hydraulic proportional pressure reducing and relieving valves
▪        比例電磁式減圧弁及び比例電磁式リリーフ減圧弁試験方法    
▪    JIS B8653-2002    电动液压比例节流阀试验方法    Test methods for electro-hydraulic proportional metering valves
▪        比例電磁式絞り弁試験方法    
▪    JIS B8654-2002    电动液压比例串联型流量控制阀试验方法    Test methods for electro-hydraulic proportional series flow control valves
▪        比例電磁式シリーズ形流量調整弁試験方法    
▪    JIS B8655-2002    电动液压比例串联型定向流量控制阀试验方法    Test methods for electro-hydraulic proportional directional series flow control valves
▪        比例電磁式シリーズ形方向流量調整弁試験方法    
▪    JIS B8656-2002    电动液压比例旁通流量控制阀试验方法    Test methods for electro-hydraulic proportional bypass flow control valves
▪        比例電磁式バイパス形流量調整弁試験方法    
▪    JIS B8657-2002    电动液压比例定向旁通流量控制阀试验方法    Test methods for electro-hydraulic proportional directional bypass flow control valves
▪        比例電磁式バイパス形方向流量調整弁試験方法    
▪    JIS B8659-1-2000    液压流体动力.电气调节液压控制阀门.第1部分:四路直流控制阀门的试验方法    Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves
▪        油圧　―　電気操作形油圧制御弁　―　第１部：４方向流量制御弁試験方法    
▪    JIS B8659-2-2002    液压流体动力.电气调节液压控制阀门.第2部分:三路定向流量控制阀门的试验方法    Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves
▪        油圧　―　電気操作形油圧制御弁　―　第２部：３方向流量制御弁試験方法    
▪    JIS B8660-2000    液压动力.流量和压力控制阀.试验方法    Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods
▪        油圧　―　制御弁（流れ・圧力）　―　試験方法    
▪    JIS B8661-2002    液压流体动力.电控油压泵试验方法    Hydraulic fluid power -- Test method for electrically controlled oil hydraulic pumps
▪        電気及び電子制御式油圧ポンプ試験方法    
▪    JIS B8663-2001    液压流体动力.液压缸.活塞和杆用方断面轴承圈的盖尺寸    Hydraulic fluid power -- Cylinders -- Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
▪        油圧　―　シリンダ　―　ピストン及びロッド用ウェアリングのハウジング寸法    
▪    JIS B8664-2001    液压流体动力.压力控制阀(不包括减压阀)、顺序活门、释荷阀、节流阀和止回阀. 安装表面    Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces
▪        油圧―減圧弁，シーケンス弁，アンロード弁，絞り弁及びチェック弁―取付面    
▪    JIS B8665-2001    液压流体动力.阀门安装表面和插装式阀腔的识别代码    Hydraulic fluid power -- Code for identification of valve mounting surfaces and cartridge valve cavities
▪        油圧　―　バルブ取付面及びカートリッジ形弁取付穴形状の識別コード    
▪    JIS B8666-2001    液压流体动力.减压阀.安装表面    Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces
▪        油圧　―　リリーフ弁　―　取付面    
▪    JIS B8667-2004    液压传动.压力开关.安装表面    Hydraulic fluid power -- Pressure switches -- Mounting surfaces
▪        油圧－圧力スイッチ－取付面及び取付寸法    
▪    JIS B9930-2000    液压流体动力.流体污染.用显微镜计数方法测定颗粒污染度    Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using a microscope
▪        油圧―作動油汚染―光学顕微鏡を用いた計数法による微粒子測定方法    
▪    JIS B9932-2003    液压流体动力.流体自动颗粒计数器的校准    Hydraulic fluid power -- Calibration of automatic particle counters for liquids
▪        油圧　―　液体用自動粒子計数器の校正方法    
▪    JIS B9933-2000    液压流体动力.流体.限定固体颗粒污染水平的编码    Hydraulic fluid power -- Fluids -- Code for defining the level of contamination by solid particles
▪        油圧　―　作動油　―　固体微粒子に関する汚染度のコード表示    
▪    JIS B9934-2000    液压流体动力.使用消光原理自动计数测定颗粒污染    Hydraulic fluid power -- Determination of particulate contamination by automatic counting using the light extinction principle
▪        油圧　―　光遮へい原理を用いた自動計数法による微粒子測定方法    
▪    JIS B9935-2001    液压流体动力.液体的在线自动粒子计数系统.校正和验证方法    Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation
▪        油圧　―　液体用オンライン式自動粒子計数システム　―　校正方法及び妥当性確認方法    
▪    JIS B9936-2001    液压流体动力.粒子污染分析.从工作系统的作业线上提取流体样品    Hydraulic fluid power -- Particulate contamination analysis -- Extraction of fluid samples from lines of an operating system
▪        油圧　―　微粒子分析　―　運転中のシステム管路からの作動油試料採取方法    
▪    JIS B9937-2001    液压流体动力.液体样品容器.合格鉴定和控制、清洁方法    Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods
▪        油圧　―　作動油試料容器　―　清浄度の品質及び管理方法    
▪    JIS B9938-2002    液压流体动力.耐火流体.使用导则    Hydraulic fluid power -- Fire-resistant (FR) fluids -- Guidelines for use
▪        油圧　―　難燃性作動油　―　使用指針    
▪    JIS B9939-1-2003    液压流体动力.测量技术.第1部分:一般测量原则    Hydraulic fluid power -- Measurement techniques -- Part 1: General measurement principles
▪        油圧　―　測定技術　―　第１部：一般測定原則    
▪    JIS B9939-2-2003    液压流体动力.测量技术.第2部分:封闭管道中平均稳态压力的测量    Hydraulic fluid power -- Measurement techniques -- Part 2: Measurement of average steady-state pressure in a closed conduit
▪        油圧　―　測定技術　―　第２部：管路における平均定常圧力の測定    
▪    JIS D2601-2006    汽车零件.使用非石油基制动流体的液压制动系统的制动软管组件    Automotive parts -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
▪        自動車部品―非鉱油系液圧ブレーキホースアセンブリ    
▪    JIS D2603-2005    汽车部件.使用非石油基液压制动液的液压制动系统用液压制动主缸    Automotive parts -- Hydraulic brake master cylinders for hydraulic brake systems using a non-petroleum base hydraulic brake fluid
▪        自動車部品－非鉱油系液圧ブレーキマスタシリンダ    
▪    JIS D2604-1998    汽车零部件.使用非石油基制动流体的液压制动系统的液压车轮制动缸    Automotive parts -- Hydraulic brake wheel cylinders for hydraulic brake systems using a non-petroleum base brake fluid
▪        自動車部品　―　非鉱油系液圧ブレーキホイールシリンダ    
▪    JIS D2605-2005    汽车部件.使用非石油基液压制动液的液压制动缸用橡胶皮碗    Automotive parts -- Rubber cups for hydraulic braking cylinders using a non-petroleum base hydraulic brake fluid
▪        自動車部品－非鉱油系液圧ブレーキシリンダのゴムカップ    
▪    JIS D2608-1998    汽车零件.使用非石油基液压制动流体的液压制动轮缸的橡胶套管    Automotive parts -- Rubber boots for hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid
▪        自動車部品　―　非鉱油系液圧ブレーキホイールシリンダのゴムブーツ    
▪    JIS D2609-2002    道路车辆.使用非石油基液压制动液的液压盘式制动缸的弹性密封件    Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid
▪        自動車　―　非鉱油系液圧ディスクブレーキのゴムシール    
▪    JIS D2610-2005    汽车部件.使用非石油基液压制动液体的液压制动主油缸储油箱用膜片衬垫    Automotive parts -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
▪        自動車部品－非鉱油系液圧ブレーキマスタシリンダのダイヤフラムガスケット    
▪    JIS D2611-1995    汽车部件.使用非石油基液压制动油的液压盘式制动器油缸的弹性防尘罩    Automotive parts -- Elastomeric boots of hydraulic disc brakes cylinders using a non-petroleum base hydraulic brake fluid
▪        自動車部品　―　非鉱油系液圧ディスクブレーキのゴムブーツ    
▪    JIS D2612-2005    汽车部件.使用非石油基液压制动液的液压制动主油缸用储油箱密封件    Automotive parts -- Reservoir seals for hydraulic brake master cylinders using a non-petroleum base hydraulic brake fluid
▪        自動車部品－非鉱油系液圧ブレーキマスタシリンダのリザーバシール    
▪    JIS D8101-1994    汽车用便携式液压千斤顶    Portable hydraulic jacks for automobiles
▪        自動車用油圧式携行ジャッキ    
▪    JIS D8101 AMD 1-2006    汽车用便携式液压千斤顶（修改件1）    Portable hydraulic jacks for automobiles (Amendment 1)
▪        自動車用油圧式携行ジャッキ（追補１）    
▪    JIS D8102-1994    汽车用液压千斤顶    Hydraulic garage jacks for automobiles
▪        自動車用油圧式ガレージジャッキ    
▪    JIS F1024-1998    小船.液压操纵方向系统    Small craft -- Hydraulic steering systems
▪        舟艇　―　油圧操だ装置    
▪    JIS F6720-1995    船液压舵机的工厂试验方法    Shop test method for ships' hydraulic steering gears
▪        船用油圧かじ取機工場試験方法    
▪    JIS F6721-1995    船用液压舵机液压泵的工厂试验方法    Shop test method for oil pressure pumps at hydraulic steering gears for ships
▪        船用油圧かじ取機用油圧ポンプ工場試験方法    
▪    JIS F8079-1989    船用电气设施.第204部分:系统设计.电动及电动液压转向机构    Electrical installations in ships Part 204 System design -- Electric and electrohydraulic steering gear
▪        船用電気設備　第２０４部　システム設計　―　電動及び電動油圧操だ装置    
▪    JIS K6330-8-1998    橡胶和塑料软管的测试方法.第8部分:无挠曲的液压脉冲试验    Testing methods for rubber and plastics hoses -- Part 8: Hydraulic-pressure impulse test without flexing
▪        ゴム及び樹脂ホース試験方法　―　第８部：衝撃圧力試験    
▪    JIS K6349-1-1999    液压用钢丝增强橡胶软管.第1部分:橡胶软管和软管组件.线增强液压型.规范    Wire reinforced rubber hoses for hydraulic -- Part 1: Rubber hoses and hose assemblies -- Wire-reinforced hydraulic type -- Specification
▪        液圧用鋼線補強ゴムホース　―　第１部：鋼線編組補強ゴムホース    
▪    JIS K6349-2-1999    液压用钢丝增强橡胶软管.第2部分:橡胶软管和软管组件.橡胶包覆的螺旋线增强液压型.规范    Wire reinforced rubber hoses for hydraulic -- Part 2: Rubber hoses and hose assemblies -- Rubber-covered, spiral wire reinforced, hydraulic type -- Specification
▪        液圧用鋼線補強ゴムホース　―　第２部：鋼線スパイラル補強ゴムホース    
▪    JIS K6349-3-1999    液压用钢丝增强橡胶软管.第3部分:线增强橡胶软管    Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses
▪        液圧用鋼線補強ゴムホース　―　第３部：鋼線補強ゴムホース    
▪    JIS K6349-3 ERRATUM 1-2000    液压系统用钢丝增强橡胶软管.第3部分:钢丝增强橡胶软管(勘误 1)    Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses (Erratum 1)
▪    JIS K6375-1999    塑料软管和软管组件.液压型织物增强的热塑性塑料.规范    Plastics hoses and hose assemblies -- Thermoplastics, textile-reinforced, hydraulic type -- Specification
▪        液圧用繊維補強樹脂ホース    
▪    JIS K6379-1999    塑料软管和软管组件.织物增强的液压型.规范    Rubber hoses and hose assemblies -- Textile-reinforced hydraulic type -- Specification
▪        液圧用繊維補強ゴムホース    
▪    JIS W0105-1984    飞机液压和气压系统术语汇编    Glossary of terms for aircraft hydraulic and pneumatic systems
▪        航空用語（油圧及び空気圧系統）    
▪    JIS W1842-1994    航空航天.恒定置换液压马达.一般规范    Aerospace -- Constant displacement hydraulic motors -- General specifications
▪        航空宇宙　―　固定容量形油圧モータ　―　一般要求事項    
▪    JIS W2909-1982    飞机液压系统及应急气动系统的试验    Test for aircraft hydraulic and emergency pneumatic systems
▪        航空機油圧系統及び非常空気圧系統の試験通則    
▪    JIS W2913-1982    飞机液压系统元件的通用规范    Hydraulic system components, aircraft, general specification for
▪        航空機用油圧系統構成部品通則    
▪    JIS W2921-1993    航空航天.液压系统和部件.压力和温度分类    Aerospace -- Fluid systems and components -- Pressure and temperature classifications
▪        航空宇宙　―　流体系統及び構成部品　―　圧力及び温度分類    
▪    JIS W2922-1996    飞行器.液压元件.认可元件用指示流体的标记    Aircraft -- Hydraulic components -- Marking to indicate fluid for which component is approved
▪        航空機　―　油圧系統構成部品　―　使用作動油の種類の表示    
▪    JIS W2923-2000    航空航天.流体系统和部件.液压流体的固体颗粒污染物的系统取样和测量方法    Aerospace -- Fluid systems and components -- Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
▪        航空宇宙　―　流体系統及び構成部品　―　作動油の固体微粒子汚染の試料採取及び測定の方法    
▪    JIS W2924-2002    航空航天.液压流体的清洁度分类    Aerospace -- Cleanliness classification for hydraulic fluids
▪        航空宇宙　―　油圧作動油の清浄度    
▪    JIS W2925-2002    航空航天.液压系统流体污染.取样点的位置和取样的准则    Aerospace -- Hydraulic system fluid contamination -- Location of sampling points and criteria for sampling
▪        航空宇宙　―　油圧作動油汚染　―　サンプリングの位置及び基準

▪    NF A49-300-4-2003    精密装置用钢管.交货技术条件.第4部分:液压和气压动力系统用无缝冷拉管    (Steel tubes for precision applications - Technical delivery conditions - Part 4 : seamless cold drawn tubes for hydraulic and pneumatic power systems.)
▪    NF A49-330-1985    钢管.液压和气压传动系统用无缝冷拉钢管.尺寸.交货技术条件    (Steel tubes. Seamless cold-drawn tubes for hydraulic and pneumatic power systems. Dimensions. Technical delivery conditions.)
▪    NF A49-866-1999    金属材料.管圈液压试验    (METALLIC MATERIALS. TUBE RING HYDRAULIC PRESSURE TEST. (EUROPEAN STANDARD EN 10275).)
▪    NF A49-875-1-1996    钢管的无损检测.第1部分:证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验    (Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.)
▪    NF A49-875-2-2000    钢管的无损检验.第2部分:检验液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管(埋弧焊除外)的自动涡流试验    (Non-destructive testing of steel tubes - Part 2 : automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of)
▪    NF A84-330-1982    气焊设备.乙炔发生器用“防回气—断火”的液压安全阀和组合装置.规范和试验    (GAS WELDING EQUIPMENT. HYDRAULIC SAFETY SEALS AND COMBINED “NON-RETURN VALVE/FLAME ARRESTOR“ DEVICES FOR ACETYLENE GENERATORS. REQUIREMENTS AND TESTS.)
▪    NF C18-440-2002    液压电缆切割装置.标称电压高达交流30KV的电气设施用设备    (Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV.)
▪    NF C26-235-1-1994    电绝缘材料的液压稳定性的试验方法.第1部分:塑料薄膜    (Method of test for the hydrolic stability of electrical insulating materials. Part 1 : plastic films.)
▪    NF C26-235-2-1998    电气绝缘材料.液压稳定性试验方法.第2部分:模制热固    (Electrical insulating materials. Methods of test for the hydrolytic stability. Part 2 : moulded thermosets.)
▪    NF C46-520-1993    工业过程控制阀.第8部分:噪声问题.第2节:通过控制阀的液压流动产生的噪声的实验室测量    (Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.)
▪    NF C46-522-1994    工业处理控制阀.第8部分:噪声条款.第4节:液压流动产生的噪声预定(EN 534-8-4)    (Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.)
▪    NF C55-420-1993    液压机(涡轮、存储泵和水泵-水轮机)的振动和脉动的现场测量指南    (Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storga pumps and pump-turbines).)
▪    NF C55-493-2000    液压涡轮机,储存泵和泵涡轮.模型验收试验    (Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests.)
▪    NF C55-562-2002    液压汽轮机控制系统规范指南    (Guide to specification of hydraulic turbine control systems.)
▪    NF D36-401-2000    建筑阀门.液压安全装置组.试验和要求    (Building valves - Hydraulic safety groups - Tests and requirements.)
▪    NF E04-056-1992    液压和气压传动.图解符号和电路图.第1部分:图解符号(ISO 1219-1-92)    (Fluid power systems and components. Graphic symbols and circuit diagrams. Part 1 : graphic symbols.)
▪    NF E04-057-1998    液压系统和元件.图形符号和电路图.第2部分:电路图    (Fluid power systems and components. Graphic symbols and circuits diagrams. Part 2 : circuit diagrams.)
▪    NF E29-409-1992    工业阀门.气动的和液压的促动器.规范    (INDUSTRIAL VALVES. PNEUMATIC AND HYDRAULIC ACTUATORS. SPECIFICATIONS.)
▪    NF E29-761-1988    气瓶.液压下裂开试验    (GAS CYLINDERS. HYDRAULIC BURSTING TEST.)
▪    NF E38-423-1993    自然通风湿冷却塔.热性能,液压性能和声学性能的试验方法和验收条件    (NATURAL DRAFT WET COOLING TOWERS. TEST METHODS AND ACCEPTANCE CONDITIONS FOR THE THERMAL, HYDRAULIC AND ACOUSTIC PERFORMANCES.)
▪    NF E44-051-2001    液体泵.安全要求.静液压试验过程    (Liquid pumps - Safety requirements - Procedure for hydrostatic testing.)
▪    NF E44-090-1998    液压泵和液压泵组件.一般安全要求    (Pumps and pump units for liquids. Common safety requirements.)
▪    NF E44-401-2000    旋转动力泵.液压性能验收试验.等级1和2    (Rotodynamic pumps - Hydraulic perforamnce acceptance tests - Grades and 2.)
▪    NF E44-501-1991    小功率液压涡轮机.平台试验    (LOW POWER HYDRAULIC TURBINES. TESTS ON TEST RIG.)
▪    NF E48-001-1995    液压传动.160bar单双杆液压缸.内径32-160mm.量规系列.设计和互换尺寸    (Hydraulic fuid power. 160 bar single and double-rod cylinders, bore 32 to 160 mm. French former series. Designation and interchangeability dimensions.)
▪    NF E48-010-1984    液压传动.千斤顶.塞杆端部用内螺纹普通定位销和支座    (Hydraulic fluid power. Cylinder. Fork yoke and tenon for extremity of piston rod.)
▪    NF E48-015-2001    液力传动.16MPa(160bar)系列单杆液压缸装配尺寸.第1部分:中型系列    (Hydraulic fluid power - Mounting dimensions for single rot cylinders, 16 MPa (160 bar) series - Part 1 : medium series.)
▪    NF E48-016-2001    液力传动.16MPa(160bar)系列单杆液压缸装配尺寸.第2部分:小型系列    (Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2 : compact series.)
▪    NF E48-025-1987    液压传动.250巴千斤顶.单杆.内径50到500mm.标牌和互换性尺寸    (Hydraulic fluid power. 250 bar single-rod cylinders. Bore from 50 to 500 mm.)
▪    NF E48-030-2001    液动系统和元件.液压缸.装配尺寸和装配类型的识别标志    (Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types.)
▪    NF E48-031-1998    液压气动.圆柱缸.标识    (Hydraulic fluid power. Cylinders. Designation.)
▪    NF E48-032-2002    液力传动.液压缸.验收试验    (Hydraulic fluid power - Cylinders - Acceptance tests.)
▪    NF E48-034-1990    液压传动.液压缸.小摩擦力活塞杆的密封壳.尺寸    (Hydraulic fluid power. Cylinders. Seal housing for low-friction rods. Dimensions.)
▪    NF E48-036-1984    液压传动.千斤顶.铸铁活塞环和活塞室公差和尺寸    (HYDRAULIC FLUID POWER. CYLINDER. DIMENSIONS AND TOLERANCES OF CAST IRON PISTON RINGS AND OF THEIR HOUSINGS.)
▪    NF E48-039-1987    液压传动.千斤顶.活塞导向环密封垫圈连接槽.尺寸    (Hydraulic fluid power. Cylinders. Seal-incorporating bearing ring housing for pistons. Dimensions.)
▪    NF E48-050-1-1994    液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第1部分:载头壳体内具有O形环的油口    (Connections for fluid power and general use. Ports and stud ends with iso 261 threads and O-ring sealing. Part 1 : ports with O-ring seal in truncated housing.)
▪    NF E48-050-2-1994    液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第2部分:重载(S系列)螺柱端头.尺寸    (Connections for fluid power and general use. Ports and stud ends with iso 261 threads and O-ring sealing. Part 2 : heavy-duty (S series) stud ends. Dimensions, design, test methods and requirements.)
▪    NF E48-050-3-1994    液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第3部分:轻载(L系列)螺柱端头.尺寸    (Connections for fluid power and general use. Ports and stud ends with iso 261 threads and O-ring sealing. Part 3 : light-duty (L series) stud ends. Dimensions, design, test methods and requirements.)
▪    NF E48-051-1992    液压传动.进气口上的步进管螺纹接头.接头尺寸    (Hydraulic fluid power. Pipe threaded connections for supply ports. Connecting dimensions.)
▪    NF E48-052-1992    液压传动.液压缸.缸筒和活塞杆截面比    (Hydraulic fluid power. Cylinders. Bore and rod area ratios.)
▪    NF E48-055-1-2003    液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘联接器.第1部分:压力为3.5MPa至35MPa(35bar至350ba    (Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1 : flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN)
▪    NF E48-055-1986    液压传动.法兰盘和银插入凸缘的矩形法兰和装置，公称压力250和400.尺寸    (Hydraulic fluid power. Rectangular flanges with recessed flange head. PN 250 and PN 400. Dimensions.)
▪    NF E48-055-2-2003    液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘联接器.第2部分:压力为35MPa至40MPa(350bar至400ba    (Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2 : flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN)
▪    NF E48-056-2001    液压动力.在压力为20MPa(200bar)至压力为31,5MPa(315bar)使用的面对流型,快反应耦合型    (Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications.)
▪    NF E48-057-1-2001    液压动力和一般用连接件.诊断用途的液压耦合件.第1部分:非压力连接耦合    (Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1 : coupling not for connection under pressure.)
▪    NF E48-057-2-2001    液压动力和一般用连接件.诊断用途的液压耦合件.第2部分:压力连接的M16X2末端的耦合    (Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2 : coupling with M16 X 2 end for connection under pressure.)
▪    NF E48-058-1-2001    液压动力.快速反应耦合.第1部分:尺寸和要求    (Hydraulic fluid power - Quick-action couplings - Part 1 : dimensions and requirements.)
▪    NF E48-058-2-2001    液压动力.快速反应耦合.第2部分:试验方法    (Hydraulic fluid power - Quick-action couplings - Part 2 : test methods.)
▪    NF E48-059-1991    液压和气压传动.起重器.活塞冲程的基本序列    (Fluid power systems and components. Cylinders. Basic series of piston strokes.)
▪    NF E48-060-1992    液压和气压传动.千斤顶.活塞杆的端头.螺纹:尺寸和类型    (Fluid power. Cylinders. Piston rod thread dimensions and types.)
▪    NF E48-064-1998    液压传动和一般用金属导管的连接.第1部分:24喇叭形压合接头    (Metallic tube connections for fluid power and general use. Part 1 : 24 degrees compression fittings.)
▪    NF E48-064-4-2000    液压动力和一般应用的金属管连接.第4部分:由O型环焊接的24芯连接    (Metallic tube connections for fluid power and general use - Part 4 : 24 o cone connectors with O-ring weld-on nipples.)
▪    NF E48-065-1-2000    一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第1部分:螺纹孔    (Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1 : threaded ports.)
▪    NF E48-065-2-2000    一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第2部分:带弹性体密封的    (Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2 : stud ends with elastomeric sealing (type E).)
▪    NF E48-065-3-2000    一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第2部分:带金属对金属密    (Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3 : stud ends with metal-to-metal sealing (type B).)
▪    NF E48-080-1989    液压和气压传动.连接软管.词汇    (Fluid power. Hose assemblies. Vocabulary.)
▪    NF E48-088-1999    橡胶和塑料软管组件.液压脉冲弯曲试验(半Ω 型试验)    (Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test).)
▪    NF E48-100-2000    液压传动系统和元件.标称压力    (Fluid power systems and components - Nominal pressures.)
▪    NF E48-101-1984    液压传动.泵，发动机和变速器.量值的定义和用作符号的字母    (Hydraulic fluid power. Pumps, motors and integral transmissions. Parameter definitions and letter symbols.)
▪    NF E48-151-2000    液压传动.带分离器的气压蓄能器.压力和容量范围、性能数据    (Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities.)
▪    NF E48-152-1996    液压传动.气压蓄能器.气孔尺寸    (Hydraulic fluid power. Gas-loaded accumulators. Dimensions of gas ports.)
▪    NF E48-153-1999    液压传动.带隔板的气载蓄能器.优先液压端口的选择    (HYDRAULIC POWER. GAS-LOADED ACCUMULATORS WITH SEPARATOR. SELECTION OF PREFERRED HYDRAULIC PORTS.)
▪    NF E48-202-1996    机械安全.液力系统和部件的安全要求.液压装置(欧洲标准EN 982)    (SAFETY OF MACHINERY. SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS. HYDRAULICS. (EUROPEAN STANDARD EN 982).)
▪    NF E48-351-1974    液压传动系统.系统和元件的整理和包装规则    (HYDRAULIC FLUID POWER SYSTEMS.RULES FOR CONDITIONING AND PACKING SYSTEMS AND COMPONENTS)
▪    NF E48-354-1989    液压传动.容积泵和容积汽缸功率的测定    (HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS.)
▪    NF E48-361-1992    液压传动.变量或定量汽缸发动机.控制规范    (HYDRAULIC FLUID POWER. FIXED AND VARIABLE DISPLACEMENT MOTORS. SPECIFICATION WITH ODER.)
▪    NF E48-381-2002    液压传动.马达特性的测定.第1部分:在恒低速和恒压力下的测定    (Hydraulic fluid power - Determination of characteristics of motors - Part 1 : at constant low speed and constant pressure.)
▪    NF E48-382-2002    液压传动.马达特性的测定.第2部分:起动性    (Hydraulic fluid power - Determination of characteristics of motors - Part 2 : startability.)
▪    NF E48-384-1992    液压动力.固定式活塞泵.由于AC级细粒粉尘污染引起的流动降缓.试验方法    (HYDRAULIC FLUID POWER. FIXED DISPLACEMENT PUMPS. FLOW DEGRADATION DUE TO CLASSIFIED AC FINE TEST DUST CONTAMINANT. TEST METHOD.)
▪    NF E48-390-1997    液压传动.在系统和元件中对产生压力波动等级的测定.第1部分:泵精确度法    (HYDRAULIC FLUID POWER. DETERMINATION OF PRESSURE RIPPLE LEVELS GENERATED IN SYSTEMS AND COMPONENTS. PART 1 : PRECISION METHOD FOR PUMP.)
▪    NF E48-391-2000    液压动力.系统和元件内产生的压力波动水平的测定.泵用简化方法    (Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps.)
▪    NF E48-392-1-2002    液压传动.元件和系统中液载噪音特性的测定.第1部分:绪论    (Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 1 : introduction.)
▪    NF E48-392-2-2001    液压传动.元件和系统中液载噪音特性的测定.第2部分:管道液流中声音速度的测量    (Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2 : measurement of the speed of sound in a fluid in a pipe.)
▪    NF E48-400-1996    液压传动.阀门装配面及盒式阀腔的识别标志    (HYDRAULIC FLUID POWER. CODE FOR IDENTIFICATION OF VALVE MOUNTING SURFACES AND CARTRIDGE VALVE CAVITIES.)
▪    NF E48-412-1995    液压系统和元件.带接地的双脚电插头.特性和要求    (Fluid power systems and components. Two-pin electrical plug connectors with earth contact. Characteristics and requirements.)
▪    NF E48-423-2001    液压传动.减压阀、顺序阀、卸载阀、节流阀和止回阀.装配面    (Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces.)
▪    NF E48-432-1993    液压动力.4和5阀口伺服阀.安装面    (HYDRAULIC FLUID POWER. POUR- AND FIVE-PORTS SERVOVALVES. MOUNTING SURFACES.)
▪    NF E48-435-1998    液压传动.尺寸02、03和05的四端口模式排气阀和四端口方向控制阀.夹紧尺寸    (Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.)
▪    NF E48-501-1994    液压传动.160bar中型系列和250bar气缸.附件安装尺寸    (Hydraulic fluid power. Cylinders, 160 bar medium series and 250 bar. Mouting dimensions for accessories.)
▪    NF E48-503-1987    液压传动.千斤顶.160bar小型A千斤顶活塞杆端头的球头销定    (HYDRAULIC FLUID POWER. CYLINDER. ROD END SPHERICAL EYE FOR 160 BAR SINGLE-ROD CYLINDER,COMPACT SERIE A.)
▪    NF E48-505-1988    液压传动.160巴小型系列液压缸.B型V形撑架    (HYDRAULIC FLUID POWER. CYLINDER 160 BAR COMPACT SERIE. CLEVIS BRACKET FORM B.)
▪    NF E48-550-1998    液压传动系统.O型环遮蔽罩.旋转轴或扩孔器遮蔽罩的设计    (Fluid power systems. O-ring housings. Design of housing for static assemblies in shaft or bore.)
▪    NF E48-560-1997    液压驱动系统.环行垫圈罩.轴向装配设计    (FLUID POWER SYSTEMS. O-RING HOUSINGS. AXIAL ASSEMBLY DESIGNS.)
▪    NF E48-602-1982    润滑油，工业油和相关产品.L级.分类.H系列液压系统    (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS. CLASS L. CLASSIFICATION. FAMILLE H. “HYDRAULIC SYSTEM“.)
▪    NF E48-612-1973    液压传动用流体.A和C级难燃流体pH值的测定    (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF PH VALUES OF FIRE-RESISTANT FLUIDS,FORMS A AND C)
▪    NF E48-613-1973    液压传动用流体.D级难燃流体蒸汽压力的测定    (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF VAPOUR PRESSUREOF FIRE-RESISTANT FLUIDS,FORM D)
▪    NF E48-614-1973    液压传动用流体.难燃流体脱气能力测定    (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF DEAERATION ABILITY OF FIRE-RESISTANT FLUIDS)
▪    NF E48-615-1973    液压传动用流体.A和B级难燃流体乳化稳定性测定    (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF EMULSION STABILITY OF FIRE-RESISTANT FLUIDS,FORMS A AND B)
▪    NF E48-617-1974    液压传动用流体.难燃流体和HM及HV级矿物油.耐磨性能    (FLUIDS FOR HYDRAULIC POWER SYSTEMS-FIRE RESISTANT FLUIDS AND MINERAL OILS,FORMS HM AND HV - ANTI-WEAR PROPERTIES)
▪    NF E48-618-1973    液压传动用流体.用难燃流体屏幕在高压射流下可燃性的测定    (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF IGNITABILITY OFFIRE-RESISTANT FLUIDS ATOMIZED UNDER HIGH PRESSURE WITH SCREEN)
▪    NF E48-620-1973    液压传动用流体.碳尘埃和难燃流体混合物中火焰蔓延性的测定    (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF FLAME-PROPAGATION IN A MIXTURE OF FIRE-RESISTANT FLUIDS WITH COAL-DUST)
▪    NF E48-640-1973    液压传动用流体.难燃流体使用须知    (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DIRECTIONS FOR USE OF FIRE-RESISTANT FLUIDS)
▪    NF E48-651-2002    液压传动.液压液污染.用光学显微镜计数法测定粒状污染物    (Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope.)
▪    NF E48-652-1990    液压传动用流体.用重量法测定粉尘总污染    (Hydraulic fluid power. Fluids. Determination of overall particulate contamination by the gravimetric method.)
▪    NF E48-658-1990    液压传动.流体.利用光干扰自动计数法对粉末污染的测定    (HYDRAULIC FLUID POWER. FLUIDS. DETERMINATION OF PARTICULATE CONTAMINATION BY AUTOMATIC COUNTING USING THE LIGHT INTERRUPTION PRINCIPLE.)
▪    NF E48-659-2003    液压传动.部件和元件的清洁度.与污物收集、分析和数据报告相关的检验文件和原则    (Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting.)
▪    NF E48-660-1991    液压传动.流体.用光学显微镜和图象分析测定固体粉尘污染    (HYDRAULIC FLUID SYSTEMS. FLUIDS. DETERMINATION OF SOLID PARTICULATE CONTAMINATION BY OPTICAL MICROSCOPE AND IMAGE ANALYSIS.)
▪    NF E48-670-2003    液压传动.滤芯.性能特征鉴定的试验序列    (Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics.)
▪    NF E48-675-1988    液压传动.过滤元件.用流量循环变化的疲劳试验检验过滤元件的特性    (Hydraulic fluid power. Filter elements. Resistance to the fatigue due to cyclic flow variations.)
▪    NF E48-678-1995    液压传动.接收器口及压力输送用过滤器.性能    (Hydraulic fluid power. Filters for receiver venting and pressurization. Performances.)
▪    NF E48-679-1990    液压传动.过滤器.绝对过滤额定值的测定    (HYDRAULIC FLUID POWER. FILTER ELEMENTS. DETERMINATION OF ABSOLUTE FILTRATION RATING.)
▪    NF E48-685-2000    液压动力.过滤元件的过滤性能的评价多途径方法    (Hydraulic fluid power - Multi-pass method for evaluating filtration performance of a filter element.)
▪    NF E48-690-1990    液压传动.流体.矿物油过滤性的测定    (Hydraulic fluid power. Fluids. Measurement of filtrability of mineral oils.)
▪    NF E48-691-1995    液压传动.液体.存在于水中的矿物油的可滤性测量    (Hydraulic fluid power. Fluids. Measurement of filtrability of minerals oils in the presence of water.)
▪    NF E48-692-1997    液压传动.液体.HFC和HFD类防火液体的可滤性测量    (Hydraulic fluid power. Fluids. Measurement of filtrability of HFC and HFD class fire resistant fluids.)
▪    NF E48-695-2003    液压传动.零部件.微粒污染测量结果的表示    (Hydraulic fluid power - Parts and components - Expression of particulate pollution measurement results.)
▪    NF E48-701-1993    液压传动.滤油器.定义、标定压力、标定尺寸、配件尺寸    (Hydraulic fluid power. Filters. Definitions, nominal pressures, nominal sizes, fitting dimensions.)
▪    NF E48-702-1993    液压传动.滤油器元件和滤油器腔.特性和要求    (Hydraulic fluid power. Filter elements and filter housings. Characteristics, requirements.)
▪    NF E48-703-1993    液压传动.串联过滤器用过滤器元件.尺寸    (Hydraulic fluid power. Filtr elements for inline filters. Dimensions.)
▪    NF E48-704-1995    液压传动.箱顶回流过滤器用过滤器元件.尺寸    (Hydraulic fluid power. Filter elements for tank top return filters. Dimensions.)
▪    NF E48-705-1998    液压动力.水箱顶部回转线滤膜.滤膜尺寸    (Hydraulic fluid power. Tank top return-line filter. Fitting dimensions.)
▪    NF E49-001-1992    液压动力.8bar巴单和双端带活塞杆气缸.孔径为25mm-200mm.安装尺寸的互换性    (Pneumatic fluid power. 8 bar single and double-ended piston rod cylinders. Bores from 25 mm up to 200 mm. Interchangeability and mounting dimensions.)
▪    NF E49-004-1-1998    液压动力.10bar气缸.袖珍系列,缩小冲程.尺寸互换性.第1部分:内径由20MM-63MM的信号反应气缸.    (PNEUMATIC FLUID POWER. 10 BAR CYLINDERS, COMPACT SERIES, REDUCED STROKE, INTERCHANGEABILITY DIMENSIONS. PART 1 : SINGLE ACTING CYLINDERS, BORES FROM 20 MM TO 63 MM.)
▪    NF E49-004-2-1998    液压动力.10bar气缸.袖珍系列,缩小冲程.尺寸互换性.第2部分:内径由20MM-100MM的双反应气缸.    (PNEUMATIC FLUID POWER. 10 BAR CYLINDERS, COMPACT SERIES, REDUCED STROKE, INTERCHANGEABILITY DIMENSIONS. PART 2 : DOUBLE ACTING CYLINDERS, BORES FROM 20 MM TO 100 MM.)
▪    NF E49-600-1988    液压动力系统和元件.液力逻辑路线.第1部分:二进制逻辑及有关功能符号    (Fluid-power systems and components. Fluid logic circuit. Part 1 : symbols for binary logic and related functions.)
▪    NF E49-601-1990    液压和气压传动.液力逻辑线路.第2部分:与逻辑符号相对应的供液和排液符号    (Fluid power systems and components. Fluid logic circuits. Part 2 : symbols for supply and exhausts as related to logic symbols.)
▪    NF E49-602-1990    液压和气压传动.液力逻辑电路.第3部分:逻辑程序和相关函数图形    (Fluid power systems and components. Fluid logic circuit. Part 3 : symbols for logic sequencers and related functions.)
▪    NF E52-071-1982    液压自动升降式栏板.一般安全规则    (HYDRAULIC LIFTING BACK DOORS. GENERAL SAFETY RULES.)
▪    NF E52-072-1990    起重机.液压装置.设计和实施规则    (LIFTING EQUIPMENT. HYDRAULIC EQUIPMENT. DESIGN AND CONSTRUCTION RULES.)
▪    NF E56-003-1-2002    地下采矿用机械.液压矿顶支撑物的安全要求.第1部分:支撑物设施的一般要求    (Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1 : support units and general requirements.)
▪    NF E56-003-2-2002    地下采矿用机械.液压矿顶支撑物的安全要求.第2部分:动力支架和推杆    (Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2 : power set legs and rams.)
▪    NF E58-010-1995    土方机械.液压挖掘机.术语及商品规格    (EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS. TERMINOLOGY AND COMMERCIAL SPECIFICATIONS.)
▪    NF E58-073-1995    土方机械.液压挖掘机.机械过加载的测量方法    (EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS. METHODS OF MEASURING TOOL FORCES.)
▪    NF E58-077-1989    土方机械.液压挖土机.反铲测定体积评价    (EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS AND BACKHOE LOADERS. VOLUMETRIC RATING FOR HOE BUCKET. COMPLETE METHOD.)
▪    NF E58-100-1996    土方机械.安全.第5部分:液压开凿机要求(欧洲标准EN 474-5)    (Earth-moving machinery. Safety. Part 5 : requirements for hydraulic excavators.)
▪    NF E58-151-1997    土方机械.液压挖掘机和反铲装载机悬臂降低控制装置.要求和试验    (EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATOR AND BACKHOE LOADER BOOM LOWERING CONTROL DEVICE. REQUIREMENTS AND TESTS.)
▪    NF E58-153-1995    土方机械.液压挖掘机.提升能力    (EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS. LIFT CAPACITY.)
▪    NF E63-021-2001    机床.安全.液压    (Machine-tools - Safety - Hydraulic presses.)
▪    NF E63-022-2001    机床的安全.液压制动    (Safety of machine tools - Hydraulic press brakes.)
▪    NF E64-115-1986    木材加工机械.液压立式包装或填料用木质纤维制造机.术语    (WOODWORKING MACHINES. MACHINES FOR WOOD WOOL PRODUCTION HYDRAULIC. NOMENCLATURE.)
▪    NF E90-220-1991    产生振动用伺服-液压试验装置.特性描述方法    (Servo-hydraulic test equipment for generating vibration. Method of describing characteristics.)
▪    NF F01-411-1995    铁路车辆.铁路车辆或相关耐久滑行引导车用的液压阻尼器    (RAILWAY ROLLING STOCK. HYDRAULIC DAMPERS FOR RAILWAY OR RELATED PERMANENT GUIDING VEHICLES.)
▪    NF F02-049-1969    铁路车辆.锁紧连接的液压紧固和放松. 喷油导管    (RAILWAY TRANSPORT EQUIPMENT. OIL INJECTION DUCTS FOR HYDRAULIC SCOTCHING AND UNSCOTCHING OF TIGHTENED ASSEMBLIES.)
▪    NF F02-049M1-1977    铁路车辆.锁紧连接的液压紧固和松释喷油导管    ()
▪    NF F11-010-1998    铁路车辆.液压动力系统.图解符号    (RAILWAY ROLLING STOCK. FLUID POWER SYSTEMS. GRAPHIC SYMBOLS.)
▪    NF G07-057-1992    纺织品.耐渗水性的测定.液压试验    (Textiles. Determination of resistance to water penetration. Hydrostatic pressure test.)
▪    NF G37-116-2-2003    橡胶或塑料涂层织物.破裂强度测定.第2部分:液压法    (Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2 : hydraulic method.)
▪    NF G38-143-2000    土工织物及其相关产品.耐透水性的测定(静态液压试验)    (Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test).)
▪    NF H00-071-1986    液体运输包装.轻金属包装.金属或塑料包装.混合包装.液压试验.操作方式    (PACKAGING FOR THE TRANSPORT OF LIQUIDS. LIGHT GAUGE METAL PACKAGING. METALIC OR PLASTIC PACKAGING. COMPOSITE PACKAGING WATER PRESSURE TEST. PROCEDURE.)
▪    NF J42-110-1952    造船工业.内部排水.液压排水器    (SHIPBUILDING. INTERNAL SCUPPERS. HYDRAULIC SCUPPERS.)
▪    NF J95-027/A1-2000    小艇.液压掌舵系统    (Small craft - Hydraulic steering systems.)
▪    NF L17-022-1999    航空航天系列.非金属材料.油类、液压油和燃料.液体层析法特征    (AEROSPACE SERIES. NON-METALLIC MATERIALS. OILS, HYDRAULIC FLUIDS, FUELS. CHARACTERISATION BY LIQUID CHROMATOGRAPHY.)
▪    NF L40-120-1983    液压系统.米制接头的接触面    (FLUID SYSTEMS. INTERFACE OF METRIC COUPLINGS.)
▪    NF L40-200-1967    飞机上液压管路的标记    (MARKING OF FLUID CIRCUITS IN AIRCRAFT.)
▪    NF L40-211-1989    飞行器.液压元件.表说明经批准的元件流量的标记    (AIRCRAFT. HYDRAULIC COMPONENETS. MARKING TO INDICATE FLUID FOR WHICH COMPONENTS IS APPROVED.)
▪    NF L41-101-1982    固体微粒造成的液压管路的污染.概述    (CONTAMINATION OF HYDRAULIC SYSTEMS BY SOLID PARTICULATE MATTER. GENERAL.)
▪    NF L41-102-1982    固体微粒造成的液压管路的污染.检验方法    (CONTAMINATION OF HYDRAULIC SYSTEMS BY SOLID PARTICULATE MATTER. INSPECTION METHODS.)
▪    NF L41-212-1983    液压系统.管子和接头的热冲击试验    (FLUID SYSTEMS. THERMAL SHOCK TESTING OF PIPING AND FITTINGS.)
▪    NF L41-230-1985    飞行器.液压管路组装和接头.旋转弯曲试验    (AIRCRAFT. HYDRAULIC TUBING JOINTS AND FITTINGS. ROTARY FLEXURE TEST.)
▪    NF L45-201-1991    航空和航天.恒排量液压马达.总规范    (Aerospace. Constant displacement hydraulic motors. General specifications.)
▪    NF L92-310-1977    液压千斤顶的支点    (JACKING PADS.)
▪    NF M82-426-1987    煤矿器材.液压传送接头.尺寸和特性    (Coal mine equipment. Connections for hydraulic transmissions. Sizes and characteristics.)
▪    NF P14-201-1/A1-1998    DTU 26.2.建筑工程.带有液压粘合剂的样板和板梁.第1部分:技术规范    (DTU 26.2 - Building works - Screeds and slabs with a base of hydraulic binders - Part 1 : technical specifications.)
▪    NF P14-201-1/A2-2000    DTU 26.2.建筑工程.带有液压粘合剂的样板和板梁.第1部分:技术规范    (DTU 26.2 - Building works - Screeds and slabs with a base of hydraulic binders - Part 1 : technical specifications.)
▪    NF P14-201-1/A3-2003    DTU 26.2.建筑工程.有液压粘合剂座的找平层和平板.第1部分:技术规范    (DTU 26.2 - Building works - Screeds and slabs with a base of hydraulic binders - Part 1 : technical specifications.)
▪    NF P15-108-2000    液压胶合剂.液压道路胶合剂.组成、规范和合格标准    (Hydraulic binders - Hydraulic road binders - Composition, specifications and conformity criteria.)
▪    NF P16-101-1999    用于液压交换管道,排水系统和废水组份测定的一般要求.(欧洲标志EN773)    (General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers.)
▪    NF P16-150-4-1997    建筑物外部的排污系统.第4部分:液压设计和环境考虑    (DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS. PART 4 : HYDRAULIC DESIGN AND ENVIRONMENTAL CONSIDERATIONS. (EUROPEAN STANDARD EN 752-4).)
▪    NF P18-242-2003    土木工程和路面结构用非粘合和液压粘合材料用集料    (Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction.)
▪    NF P18-411-1981    混凝土.硬材料弯曲.压缩和拉力试验用液压机的一般特性    (Concretes. Common characteristics of hydraulic machines for compression, bending, and tension testing of hard materials.)
▪    NF P18-412-1981    混凝土.硬材料压缩试验用液压机的特殊性能    (Concretes. Individual properties of hydraulic machines for compression tests. (presses for hard materials).)
▪    NF P18-413-1981    混凝土.硬材料弯曲试验用液压机的特殊性能    (Concretes. Individual properties of hydraulic machines for bending tests of hard materials.)
▪    NF P82-310-1998    电梯制造和安装的安全规则.第2部分:液压式电梯    (Safety rules for the construction and installation of lifts. Part 2 : hydraulic lifts.)
▪    NF P82-311-1988    载客电梯和货物电梯.现在建筑物内液压电梯的建筑和安装安全规则    (PASSENGER LIFTS AND SERVICE LIFTS. SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF HYDRAULIC LIFTS IN EXISTING BUILDINGS.)
▪    NF P82-410-2001    电梯建筑和安装的安全规则.第3部分:电动和液压电梯    (Safety rules for the construction and installation of lifts - Part 3 : electric and hydraulic service lifts.)
▪    NF P98-250-6-1991    路面试验.碳水混合物的制备.第6部分:通过静液压称重测量试件表面密度    (TESTS RELATING TO PAVEMENTS. PREPARATION OF BITUMINOUS MIXTURES. PART 6 : MEASUREMENT OF THE APPARENT SPECIFIC GRAVITY OF A SPECIMEN USING THE HYDROSTATIC METHOD.)
▪    NF P98-732-1-2001    道路施工和维护设备.粒状混合物散布机.混合物制造和质量控制.第1部分:液压粘结剂处理的或未经处理的材料用    (Road construction and maintenance equipment - Manufacture of mixtures and quality control - Part 1 : mixing plants for hydraulic binder treated or untreated materials.)
▪    NF P98-791-2001    道路维护设备和产品.适用于洒盐机和扫雪车的液压驱动装置.特性和规范    (Road maintenance equipment and products - Hydraulic drive device adapted into salt speader and snow clearing blade carrying vehicles - Characteristics and specifications.)
▪    NF P98-798-1998    高速公路冬季维修设备和高速路路边设备维修.液压混合机,技术规范和性能    (Highways winter maintenance plant and highways side equipment maintenance. Hydroseeders. Technical specifications and performances.)
▪    NF R12-618-1997    道路车辆.使用非石油基液压液的液压制动系统软管组件    (Road vehicles. Brake hose assemblies for hydraulic braking systems used with a non-petrolum-base brake fluid.)
▪    NF R12-619-1997    道路车辆.使用石油基液压液的液压制动系统制动软管总成    (Road vehicles. Brake hose assemblies for hydraulic braking systems used with a petrolum-base brake fluid.)
▪    NF R12-636-1998    道路车辆.液压制动系统.导管、螺纹孔、外螺纹接头和软管管端接头    (Road vehicles. Hydraulic braking systems. Simple flare pipes, tapped holes, male fittings and hose end fittings.)
▪    NF R12-642-1991    道路车辆.液压制动器.非石油为基础的参考液体    (Road vehicles. Hydraulic braking systems. Non-petroleum base reference fluids.)
▪    NF R12-644-1990    道路车辆.液压制动.ISO石油基标准液体    (Road vehicles. Hydraulic brake systems. ISO reference petroleum base fluid.)
▪    NF R12-645-1987    道路车辆.使用石油基液压制动液(最高工作温度120℃)C)的鼓式闸轮液压缸用弹性O形密封圈    (Road vehicles. Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.).)
▪    NF R12-646-1987    道路车辆.使用石 油基液压制动液(最高工作温度120℃)C)的液压制动系统用弹性环和密封件    (ROAD VEHICLES. ELASTOMERIC CUPS AND SEALS FOR CYLINDERS FOR HYDRAULIC BRAKING SYSTEMS USING A PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGRES C MAX.).)
▪    NF R12-647-1987    道路车辆.使用石油基液压制动液(最高工作温度120℃)C)的盘式制动液压缸用弹性密封件    (Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max).)
▪    NF R12-648-1987    道路车辆.使用石油基液压制动液(最高工作温度120℃)C)的鼓式闸轮液压缸用弹性套    (ROAD VEHICLES. ELASTOMERIC BOOTS FOR DRUM TYPE HYDRAULIC BRAKE WHEEL CYLINDERS USING A PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGREES C MAX).)
▪    NF R12-651-1984    道路车辆,液压制动设备的压力传感器    (Road vehicles. Hydraulic pressure test connection for braking equipment.)
▪    NF R12-652-1991    道路车辆.液压传动制动装置.制动性能的测定    (ROAD VEHICLES. HYDRAULIC BRAKING SYSTEMS. MEASUREMENT OF BRAKING PERFORMANCE.)
▪    NF R17-104-1984    道路车辆.液压式抓斗.安全装置    (ROAD VEHICLES. DUMP TRUCKS. SAFETY ARRANGEMENTS.)
▪    NF R17-107-2001    道路车辆.可卸换翻斗的液压悬臂式车辆.安全要求    (Road vehicles - Vehicles equipped with hydraulic arms for removable skips - Safety requirements.)
▪    NF R17-108-2001    道路车辆.液压悬臂式可卸换翻斗.功能尺寸和一般要求    (Road vehicles - Removable skips for hydraulic arms - Functional dimensions and general requirements.)
▪    NF R47-101-1979    带翻斗挂车的液压耦合器    (Hydraulic coupling for trailer vehicles equipped with dumping bodies.)
▪    NF S31-014-1982    声学.供水设施用液压设备和阀门噪音的实验室测量.第1部分:测量方法    (ACOUSTICS. LABORATORY TESTS ON NOISE FORM TAPWARE AND HYDRAULIC EQUIPMENT USED IN WATER INSTALLATIONS. PART 1 : METHOD OF MEASUREMENT.)
▪    NF S61-571-1989    救护和消防的设备.液压单动器具和切割工具.特性.尺寸、功能和试验    (RESCUE AND FIRE FIGHTING EQUIPMENT. HYDRAULIC-OPERATED DOUBLE ACTING APPARATUS SPREADERS AND CUTTING TOOLS. DIMENSIONAL AND FONCTIONAL CHARACTERISTICS AND TESTS.)
▪    NF S61-572-1989    救护和消防的设备.液压单动器具和切割工具.特性.尺寸、功能和试验    (RESCUE AND FIRE FIGHTING EQUIPMENT. HYDRAULIC-OPERATED SINGLE ACTING APPARATUS SPREADERS AND CUTTING TOOLS. DIMENSIONAL AND FONCTIONAL CHARACTERISTICS AND TESTS.)
▪    NF T47-202-1996    橡胶和塑料软管及软管组件.液压静力试验(欧洲标准EN ISO 1402)    (Rubber and plastics hoses and hose assemblies. Hydrostatic testing.)
▪    NF T47-259-1996    橡胶软管和软管组件.织物增强的液压型.规范    (Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification.)
▪    NF T47-270-1997    橡胶软管和软管组件.液压型橡胶包皮螺旋金属线增强.规范    (Rubber hoses and hose assemblies. Rubber-covered spiral wire reinforced hydraulic type. Specification.)
▪    NF T47-281-1997    橡胶软管和软管组件.液压型金属丝编织物增强.规范    (Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification.)
▪    NF T47-286-1998    橡胶或塑料软管和软管组件.无柔性液压脉冲试验.欧洲标准EN ISO 6803)    (Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing.)
▪    NF T47-288-1997    橡胶软管和软管组件.液压装置用小型金属丝编织物增强.规范    (Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification.)
▪    NF T48-107-1994    密封用石棉和橡胶压缩薄板.常温下抗液压强度试验    (ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. RESISTANCE TO HYDRAULIC PRESSURE AT AMBIENT TEMPERATURE.)
▪    NF T54-012-1995    塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头.外部液压条件下防漏密封试验方法    (PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHANICAL JOINTS FOR THERMOPLASTICS PRESSURE PIPING. TEST METHOD FOR LEAKTIGHTNESS UNDER EXTERNAL HYDROSTATIC PRESSURE. (EUROPEAN STANDARD EN 911).)
▪    NF T54-900-2003    塑料管道和导管系统.用外推法测定热塑性塑料管道的长期静液压强度    (Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation.)
▪    NF T54-932-1997    塑料管道系统.注模热塑配件配件、阀和附属设备.管道元件注模用热塑材料长期液压强度的测定    (Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components.)
▪    NF T60-513-2003    润滑剂、工业润滑油和相关产品(L类).分类.第4部分:H组(液压系统)    (Lubricants, industrial oils and related products (class L) - Classification - Part 4 : family H (hydraulic systems).)
▪    NF T60-525-1998    润滑油、工业用油和相关产品(L级).H族(液压系统).目录HH、HL、HN、HR、HV和HG规范    (Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HR, HV and HG.)
▪    NF T60-526-2002    润滑油、工业油及有关产品(L级).H系列(液压系统).HFAE、HFAS、HFB、HFC、HFDR和HFDU类别规范    (Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU.)
▪    NF T81-010-1976    液态化学产品的运输和装卸.内河航行罐船.产品的液压泵输送.安全装置    (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS. TANKERS FOR INLAND NAVIGATION. PUMP TRANSFER OF PRODUCTS. SAFETY DEVICE.)
▪    NF T81-021-1977    液化气的运输和装卸.内河航行罐船.运输过程中的安全.电力-液压-气动控制应急设备    (TRANSPORTATION AND HANDLING OF LIQUEFIED GASES. TANKERS FOR USE ON INLAND WATERWAYS. SAFETY DURING TRANSFERT OPERATIONS. INTERVENTION DEVICE WITH ELECTRO-HYDRO-PNEUMATIC CONTROL.)
▪    NF U14-405-1997    农用拖拉机.器具用液压动力    (Agricultural tractors. Hydraulic pressure for implements.)
▪    NF U14-406-1992    农业拖拉机和机械.通用快速动作液压接头    (Agricultural trators and machinery. General purpose quick-action hydraulic couplers.)
▪    NF U14-407-1997    农用拖拉机和农业机械.遥控液压传动装置和控制装置的编码    (AGRICULTURAL TRACTORS AND MACHINERY. CODING OF REMOTE HYDRAULIC POWER SERVICES AND CONTROLS.)
▪    NF U16-006-1984    农林用拖拉机和器材.液压离合器    (Tractors and machinery for agriculture and forestry. Hydraulic couplings. Braking circuit.)
▪    NF U26-112-1997    作物保护设备.喷洒设备.第2部分:液压喷洒机的试验方法    (Equipment for crop protection. Spraying equipment. Part 2 : test methods for hydraulic sprayers.)
▪    NF V32-070-1-1995    辣椒及其含油树脂.用液压色谱分析法测定总辣椒素    (Chillies and chilli oleoresins. Determination of total capsaicinoid content. Part 1 : spectrometric method.)
▪    NF X50-001-5-4-1998    动力站设备的征购指南.第5-4部分:涡轮机.液压涡轮机.储存泵和泵涡轮机    (Guide for procurement of power station equipment. Part 5-4 : turbines. Hydraulic turbines, storage pumps and pump-turbines.)